Search

Iron phosphate glasses are materials that can have many applications like durable matrixes in waste immobilization techniques, biomaterials, optoelectronic devices, etc. Their possible usage is related to their glass network and thermal properties. The influence of Na2O content on thermal properties and crystallization ability of iron phosphate glass of base composition 30 Fe2O3–70 P2O5 mol% were studied. Increasing the content of Na2O causes a decrease in transformation temperature and increase in ΔCp. Characteristic temperatures, thermal stability and crystallizing phases were determined. Increasing content of sodium causes depolarization of iron phosphate glass network which causes a continuous change in ΔCp and glass transformation temperature. Discontinuous change in some glass properties suggests structure rebuilding about 30 mol% of Na2O. [ABSTRACT FROM AUTHOR]

Different types of phosphorus containing halogen-free flame retardants (FRs) were added to an epoxy-dicyandiamide resin formulation in order to study to which extent they affect its glass transition temperature (Tg), tensile properties, thermal stability and burning behavior of the resin. For this purpose, an additive-type FR (ammonium polyphosphate encapsulated in melamine resin, MAPP) and two reactive-type FRs i) a commercial epoxy resin pre-reacted with 9,10-dihydro-oxa-10-phosphaphenanthrene-10-oxide, (DOPO), and ii) a phosphorus containing hardener (poly(m-phenylene methylphosphonate), (PMP) were used. It was observed that the addition of additive-type FR did not affect in great extent the Tg and provided a V-0 rating in UL94 test at low loadings. The addition of reactive-type FRs (DOPO and/or PMP), however, modified the structure of the chain network resulting in lower crosslink density as a consequence of their higher equivalent mass, but achieving also with low PMP content V-0 rating. [ABSTRACT FROM AUTHOR]

Differential scanning calorimetry (DSC), dilatometry and X-ray diffraction have been used to study thermal behavior and stability of glasses prepared simultaneously in Al2O3 or Pt crucibles in compositional series (40 − x)MgO-xFe2O3-60P2O5 within the concentration range of x = 0-40 mol% Fe2O3. Mössbauer spectra showed that all glasses with Fe2O3 contained both Fe(II) and Fe(III) ions. The contamination glasses from alumina crucibles ranged from 0.3 to 0.9 mol% Al2O3. The replacement of MgO by Fe2O3 resulted in a gradual decrease in glass transition temperature and dilatometric softening temperature, whereas thermal expansion coefficient did not change significantly. The DSC curves showed that all glasses crystallize on heating in the broad temperature range ≈ 560-900 °C. Crystallization temperature decreases with increasing Fe2O3 content. The highest tendency toward crystallization was found for the glass containing 40 mol% Fe2O3. X-ray diffraction measurements showed that the major compounds formed by glass crystallization were Mg(PO3)2, Fe(PO3)3, Fe3(P2O7)2 and FePO4. All thermoanalytical studies showed differences in thermal behavior of glasses prepared in Al2O3 or Pt crucibles. [ABSTRACT FROM AUTHOR]

Hyperbranched poly(ester)s (HBPE) possess attributes for applications in a number of areas which include platforms for controlled release of actives and as rheology modifiers and coalescent agents in coatings. For the latter applications, properties such as the glass transition temperature and thermal stability are important. A number of HBPEs were produced with varying composition, molecular weight, degree of branching and end-group functionality in order to determine the effect of each on the HBPE thermal and rheological properties. These materials were synthesized from trimethylolpropane and the difunctional acids; adipic, phthalic and terephthalic. The chemical structure of the resulting HBPEs was fully characterized, particularly by SEC and NMR, and the thermal properties by DSC and TG. The glass transition temperature was found to depend primarily on HBPE composition and end-group functionality. The prominent feature of the thermal degradation for the hydroxyl-capped HBPE was dehydrative ether formation while that for carboxyl-capped polymers was decarboxylation. [ABSTRACT FROM AUTHOR]

Several composites and nanocomposites based on a polymeric matrix and ceramic fillers are being pursued for use as multifunctional and innovative materials. Nevertheless, there is a series of challenges to be solved in this area such as the understanding of the role of interfaces and the synergy between matrix and fillers. In this work, vulcanized natural rubber nanocomposites were prepared with different concentrations of two kinds of ceramic nanoparticles, potassium strontium niobate (KSrNbO or KSN) and nickel-zinc ferrite (NiZnFeO or NZF), synthesized by a chemical method known as the modified polyol method. Morphological and thermal characterizations were carried out by AFM, TG/DTG, TG/FTIR and DSC. The thermal properties of nanocomposites were compared and discussed as functions of concentration, type and surface of nanoparticles. The results obtained suggest that the base concentration for both types of nanoparticles inside the polymer matrix volume greatly adds to the increase in thermal stability up to 11 % and the glass transition temperature up to 10 °C. A similar evolution for the glass transition temperature ( T ), thermal stability temperature ( T ) and dielectric permittivity ( ε′) was identified, suggesting that these phenomena are mainly dominated by the same mechanisms. These results point to the possibility for the thermal parameter modulation in magnetic and ferroelectric nanocomposites by means of a suitable control of concentration and properties of the KSN and NZF nanoparticles. [ABSTRACT FROM AUTHOR]

A new series of four different linear aliphatic ether linked aromatic bismaleimides (AEBMIs) were synthesized from the respective linear aliphatic ether-linked aromatic diamines and maleic anhydride. Further, the POSS-AEBMI nanocomposites were developed by Michael addition reaction of bismaleimide with varying mass percentages of octa(aminophenyl)silsesquioxane and were characterized by the fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Data from thermal studies revealed that the POSS-reinforced AEBMI nanocomposites possesses higher glass transition temperature ( Tg), thermal stability, limiting oxygen index, and lower dielectric constant when compare to that of neat AEBMI. X-ray diffraction and transmission electron microscopy analysis confirmed the molecular level dispersion of POSS in the AEBMI matrix. [ABSTRACT FROM AUTHOR]