Search

Industrially relevant nanopowder was synthesised by microwave hydrothermal synthesis to obtain well-controlled composition (ZrO2–AlO(OH) system) which was found to determine a number of physical and thermal characteristics. This study reports variation of particle size, density, specific surface area (SSABET), as well as thermal behaviour of nanopowder mixtures of ZrO2–AlO(OH) in the whole range of compositions. It was found that the onset temperature (Ton) of physically and chemically bounded water desorption depends on the Al3+/or AlO(OH) content. The lower content of Al3+ in the ZrO2–AlO(OH) system, the higher Ton of physically bound water desorption. There are three distinct temperature regions for water decomposition for nanomaterials investigated in air (at approximately 50, 250 and 450 °C). These temperature ranges depend on particle size and chemical composition of ZrO2–AlO(OH) nanopowders. Materials were divided into three groups characterised by different properties: (1) ZrO2 with 2–12% of Al3+, where particle sizes are from 4 to 8 nm, (2) ZrO2 with 30–67% of AlO(OH), where particle sizes are from 10 to 13 nm, and (3) ZrO2 with 80–99% of AlO(OH), where particle sizes are from 13 to 23 nm. AlO(OH) content determines thermal and physico-chemical properties of synthesised ZrO2–AlO(OH) nanopowders. [ABSTRACT FROM AUTHOR]

Several composites and nanocomposites based on a polymeric matrix and ceramic fillers are being pursued for use as multifunctional and innovative materials. Nevertheless, there is a series of challenges to be solved in this area such as the understanding of the role of interfaces and the synergy between matrix and fillers. In this work, vulcanized natural rubber nanocomposites were prepared with different concentrations of two kinds of ceramic nanoparticles, potassium strontium niobate (KSrNbO or KSN) and nickel-zinc ferrite (NiZnFeO or NZF), synthesized by a chemical method known as the modified polyol method. Morphological and thermal characterizations were carried out by AFM, TG/DTG, TG/FTIR and DSC. The thermal properties of nanocomposites were compared and discussed as functions of concentration, type and surface of nanoparticles. The results obtained suggest that the base concentration for both types of nanoparticles inside the polymer matrix volume greatly adds to the increase in thermal stability up to 11 % and the glass transition temperature up to 10 °C. A similar evolution for the glass transition temperature ( T ), thermal stability temperature ( T ) and dielectric permittivity ( ε′) was identified, suggesting that these phenomena are mainly dominated by the same mechanisms. These results point to the possibility for the thermal parameter modulation in magnetic and ferroelectric nanocomposites by means of a suitable control of concentration and properties of the KSN and NZF nanoparticles. [ABSTRACT FROM AUTHOR]

A new series of four different linear aliphatic ether linked aromatic bismaleimides (AEBMIs) were synthesized from the respective linear aliphatic ether-linked aromatic diamines and maleic anhydride. Further, the POSS-AEBMI nanocomposites were developed by Michael addition reaction of bismaleimide with varying mass percentages of octa(aminophenyl)silsesquioxane and were characterized by the fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Data from thermal studies revealed that the POSS-reinforced AEBMI nanocomposites possesses higher glass transition temperature ( Tg), thermal stability, limiting oxygen index, and lower dielectric constant when compare to that of neat AEBMI. X-ray diffraction and transmission electron microscopy analysis confirmed the molecular level dispersion of POSS in the AEBMI matrix. [ABSTRACT FROM AUTHOR]

Graphene oxide (GO) is used as a stabilizer in the Pickering emulsion polymerization of methyl methacrylate (MMA) to prepare PMMA/GO nanocomposites. Transmission electron microscope studies of the emulsion polymerization products showed that the average diameter of nanocomposite particles was about 150 nm, the transparent GO flakes covered the surface of the particles, and were well dispersed in polymer matrix. The influence of GO on the thermal stability of PMMA was investigated by thermogravimetry analysis and differential scanning calorimetry. The results showed that the thermal stability and the glass transition temperature ( T) of PMMA/GO nanocomposites were improved obviously compared with PMMA. The apparent activation energy ( E) for the degradation process of PMMA/GO nanocomposites was evaluated by Kissinger method, which indicated that their E s were much higher than those of PMMA both in nitrogen and air atmosphere. [ABSTRACT FROM AUTHOR]

Thermal properties of the silica/poly(2,6-dimethyl-1,4-phenylene oxide) films prepared via emulsion polymerized mixed matrix (EPMM) method are investigated, and the impact of the synthesis protocol on the silica content, compatibility between the organic and inorganic phases, and the thermal stability of these nanocomposites is studied. Two series of films, namely EPMM- 1S and EPMM- 2S, synthesized in one- and two-step process, respectively, with different combinations of surfactant and compatibilizer were prepared. The polymerization of the silica precursor in the films was confirmed by Si nuclear magnetic resonance, and its content was investigated by inductively coupled plasma mass spectroscopy analysis. Thermal properties of the EPMM films were investigated by differential scanning calorimetry and thermogravimetric analysis. The glass transition temperature ( T) of EPMM films was greater compared to the neat PPO film. However, an increase in T was not related to the concentration of silica in the film, but rather to the quality of dispersion of synthesized nanoparticles. Despite a lower inorganic loading, EPMM- 1S films had a greater T than EPMM- 2S films. On the other hand, both the decomposition temperature and the activation energy for the decomposition were directly related to the silica content in the EPMM films. In general, regardless of the synthesis protocol, the presence of compatibilizer (ethanol) leads to greater inorganic content and improved thermal properties of the EPMM films. [ABSTRACT FROM AUTHOR]

Pristine multiwalled carbon nanotubes (MWCNTs) were impregnated in acrylonitrile butadiene rubber (NBR) using internal dispersion kneader and two roller mixing mill to investigate the effects of various nanotubes concentrations on the thermal transport/stability of rubber nanocomposites. Thermal conductivity ( λ) and thermal impedance ( R) measurement experimental setups were established according to ASTM E1225-99 and D5470-03. The 1 mass % addition of MWCNTs in the polymer matrix has enhanced R up to 44 % and reduced λ of the rubber nanocomposite up to 40 % compare to the base composite formulation. Thermal decomposition and differential thermal analyses of the fabricated composite specimens simulate that the thermal stability and endothermic capability are augmented with increasing the nanotubes contents in the host matrix. The progressive incorporations of carbon nanotubes into the rubber matrix have efficiently influenced the composite specimens regarding glass transition, crystallization, and melting temperatures including their specific enthalpies. Scanning electron microscopy along with the energy dispersive spectroscopy was used to analyze MWCNTs dispersion in NBR matrix, compositional analysis of the nanocomposite, and impregnated nanotubes. [ABSTRACT FROM AUTHOR]