Search

The manufacture of flexible devices is of immense interest due to their eco-friendliness, economic prospects and wide range of applications in biocompatible devices. Therefore, this paper reports the characterization and properties of chlorinated natural rubber (Cl-NR)/polyindole (PIN) blend with different contents of nickel oxide (NiO) nanoparticles. The formation of blend nanocomposites was analysed by FT-IR, UV spectroscopy, XRD, FE-SEM, DSC and TGA. The FT-IR and UV spectra proved the effective interfacial interaction between nanoparticles and the blend matrix, with a shift in UV peak intensity with the attachment of NiO at 433 cm−1. The XRD pattern revealed the regular arrangement of the blend matrix due to the presence of nanofiller, resulting in the semicrystalline structure of the composite system. The SEM micrographs revealed a homogeneous distribution of NiO in the blend matrix. The increased degradation temperature in the TGA demonstrated the enhanced thermal stability of the NiO-filled Cl-NR/PIN blend. DSC results showed that the glass transition temperature of the composite increased with NiO content in the blend matrix. The dielectric properties and AC electrical conductivity increased significantly with increasing temperatures, as well as with the addition of nanoparticles up to 5 mass % loading. The inclusion of NiO improved the tensile strength and hardness while reducing the elongation-at-break of nanocomposites. The blend nanocomposite with enhanced thermal stability, glass transition temperature, tensile strength, AC conductivity and dielectric properties enables them to be used in highly flexible electronic applications where traditional elastomeric materials fall short. [ABSTRACT FROM AUTHOR]

Several composites and nanocomposites based on a polymeric matrix and ceramic fillers are being pursued for use as multifunctional and innovative materials. Nevertheless, there is a series of challenges to be solved in this area such as the understanding of the role of interfaces and the synergy between matrix and fillers. In this work, vulcanized natural rubber nanocomposites were prepared with different concentrations of two kinds of ceramic nanoparticles, potassium strontium niobate (KSrNbO or KSN) and nickel-zinc ferrite (NiZnFeO or NZF), synthesized by a chemical method known as the modified polyol method. Morphological and thermal characterizations were carried out by AFM, TG/DTG, TG/FTIR and DSC. The thermal properties of nanocomposites were compared and discussed as functions of concentration, type and surface of nanoparticles. The results obtained suggest that the base concentration for both types of nanoparticles inside the polymer matrix volume greatly adds to the increase in thermal stability up to 11 % and the glass transition temperature up to 10 °C. A similar evolution for the glass transition temperature ( T ), thermal stability temperature ( T ) and dielectric permittivity ( ε′) was identified, suggesting that these phenomena are mainly dominated by the same mechanisms. These results point to the possibility for the thermal parameter modulation in magnetic and ferroelectric nanocomposites by means of a suitable control of concentration and properties of the KSN and NZF nanoparticles. [ABSTRACT FROM AUTHOR]

Polycarbonate (PC)/Zinc oxide (ZnO) nanocomposite films were prepared by a solution mixing method and irradiated by Swift heavy ion at various ions fluences ranging from 1 × 10 to 3 × 10. The surface morphological, structural, and thermal properties of untreated and irradiated PC/ZnO nanocomposite films were investigated by various characterizations techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry, Thermogravimetric (TG) and Thermally stimulated discharge current (TSDC). The XRD pattern reveals that the average crystallite size and percentage of crystallinity decreases with increase of ion fluences. TSDC measurement is an evidence of different type of relaxation process. The activation energy released charge and charge carrier mobility for α-relaxation peak decreases, while relaxation time and peak current increase. TG measurement shows thermal stability and mass loss decreases with ions fluences. FTIR spectra reveal the position of different bonds in PC and nanocomposite films. The glass transition temperature of nanocomposites is observed to be decreases with ion fluences. [ABSTRACT FROM AUTHOR]

A new series of four different linear aliphatic ether linked aromatic bismaleimides (AEBMIs) were synthesized from the respective linear aliphatic ether-linked aromatic diamines and maleic anhydride. Further, the POSS-AEBMI nanocomposites were developed by Michael addition reaction of bismaleimide with varying mass percentages of octa(aminophenyl)silsesquioxane and were characterized by the fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Data from thermal studies revealed that the POSS-reinforced AEBMI nanocomposites possesses higher glass transition temperature ( Tg), thermal stability, limiting oxygen index, and lower dielectric constant when compare to that of neat AEBMI. X-ray diffraction and transmission electron microscopy analysis confirmed the molecular level dispersion of POSS in the AEBMI matrix. [ABSTRACT FROM AUTHOR]