Search

BACKGROUND: Quality properties of 14 saffron samples from Iran, Spain, and Türkiye were compared. RESULTS: Significant differences were observed between anthocyanins, volatile compounds, fatty acids, total phenolic content, and antioxidant activity of saffron samples (P < 0.05). Besides, significant differences in color parameters were observed. Moreover, a total of 13 volatile compounds were identified in the saffron samples using. headspace–solid‐phase microextraction–gas chromatography–mass spectrometry, safranal and α‐isophorone being the two predominant aroma compounds. Regarding fatty acids, significant differences were seen in the fatty acid profiles of saffron samples (P < 0.05), while linoleic acid was the most concentrated fatty acid. In terms of sensory properties, different concentrations of safranal, α‐isophorone and 4‐ketoisophorone may lead to significant differences in the odor and taste attributes of saffron samples (P < 0.05). CONCLUSION: Changes in corm origin along with climate and agricultural conditions may affect the quality characteristics of saffron cultivated in different geographical areas to a significant degree. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

BACKGROUND: Acrylamide in foods has been widely studied because of its possible carcinogenicity. Most of the foods investigated were prepared using low moisture and high temperature conditions. Non-centrifugal sugars (NCSs), which have been promoted as 'non-chemical' natural sweeteners, contain precursors of acrylamide and their production processes involved prolonged heating. The acrylamide content in 32 commercial NCSs from coconut, cane and palmyra palm purchased in Asian countries was investigated. Additionally, syrups (80 oBrix) produced from coconut and palmyra raw saps and cane juice were prepared by evaporation with prolonged heating (2.5 h to reach 100 °C, 1 h to increase to 110 °C, held at 110 °C for 30 min). The compositions and contents of sugars, amino acids and minerals, as well as the physical characteristics of the raw saps, juice and syrups, were determined. RESULTS: The acrylamide content of these 32 products ranged from < 15 to 4011 µg kg-1. The raw saps and juice were mildly acidic (pH 5.14--5.66) and similar values were observed for their syrups (4.73-5.73). The contents of sucrose, fructose and glucose in the saps and juice from these plants were similar, whereas their compositions varied with respect to amino acids. The variation of the ornithine content was significant, demonstrating a striking influence on the extent of acrylamide formation (867-1564 µg kg-1) in the syrups prepared from these materials. CONCLUSION: The present study emphasizes the importance of a careful monitoring and control of the critical steps invloved in the manufacturing process of NCSs (particularly the evaporation phase), aiming to protect the health and safety of consumers. [ABSTRACT FROM AUTHOR]

BACKGROUND: Water scarcity is currently affecting many areas of the world, reaching worrying levels in drought areas such as southern Spain. To cope with this issue, researchers in the agricultural sector have implemented deficit irrigation strategies intended to reduce water consumption by increasing fruit quality. Almond is among the most popular tree nuts worldwide and also the most nut cultivated in Spain. Almond consumption, together with other nuts, has been widely associated with improvements in cardiovascular health, metabolic syndrome and diabetes owing to their bioactive compounds such as polyphenols. Water deficit strategies generate hydroSOStainable almonds, raised under water stress conditions, with high content of bioactive compounds. The aim of this work was to study the relationship between water stress, color and polyphenols in hydroSOStainable almonds. For this, instrumental color, total phenolic content and phenolic compounds were measured and correlated using Pearson's correlation. RESULTS: The results showed a strong relationship between water stress, color and polyphenols of almonds, showing that increasing water stress in plants up to ~100 MPa × day values of stress integral increase the polyphenols in almonds, leading to a reddish color. CONCLUSION: Finally, this research demonstrated that implementing water‐saving strategies help to improve the phenolic content and color of hydroSOStainable almonds and also that isorhamnetin‐3‐O‐rutinoside, isorhamnetin‐3‐O‐glucoside and kaempferol‐3‐O‐glucoside could be important markers of hydroSOStainable almonds (cv. Vairo). Besides, hydroSOStainable almonds could be an important source of phenols, providing 25% of the estimated total polyphenolic daily intake. © 2020 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

BACKGROUND Water scarcity is a worldwide problem that leads to environmental and economic issues. Agriculture is one of the main consumers of water for irrigation and fertilization and almond is the major tree nut crop in the Mediterranean area. Furthermore, there is a continuous growing demand for healthy, vegan and sustainable products. Consequently, the present study aimed to chemically characterize almond milk powder enriched with probiotics manufactured from hydroSOStainable almonds (i.e. generated under water stress conditions). Almond milk powder enriched with probiotic bacteria was produced with almonds grown under optimal irrigation conditions (100% of the crop evapotranspiration) and was chemically compared to the samples made from hydroSOStainable almonds. Antioxidant activity, total phenolic content (TPC), minerals, organic acids and sugars, fatty acids, and descriptive sensory analysis were evaluated. RESULTS: The results showed that almond milk powder produced from hydroSOStainable almonds had a higher content of TPC, polyunsaturated fatty acids (PUFAs), PUFAs/saturated fatty acids (SFAs) ratio and PUFAs/monounsaturated fatty acids ratio, as well as almond and nutty flavors. Moderate and sustained deficit irrigation leads to powders with a higher content of PUFAs and PUFAs/SFAs ratio, which are parameters of utmost importance for health. CONCLUSION: Using these strategies, between 66% and 76% of the irrigation water can be saved, producing hydroSOStainable almond milk powder higher in TPC and PUFAs, as well as positive sensory attributes, compared to that from fully irrigated almonds. These findings may have a positive impact in both agriculture and food industry, allowing water savings and high quality and sustainable food products to be obtained. © 2020 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

BACKGROUND The combination of the nutritional profile of almond milk with the benefits of probiotic bacteria is an interesting development to meet the demand for sustainable and health‐promoting food. Almond milk inoculated with probiotic Lactobacillus plantarum (ATCC8014) was spray dried and the almond, its milk, and powders were characterized physicochemically. Samples were characterized in terms of bacterial survival before and after atomization. Bacterial viability and total fatty acid changes were studied during 8 months' storage at 4 and 22 °C. RESULTS: Results showed adequate physicochemical properties and an optimal bacterial survival rate, maintaining almost the same values before and after the spray‐drying operation. A decrease was observed in the cell viability for samples stored at 4 °C. However, the cell count was maintained above the minimum level suggested (107 living cells) to allow potential probiotic functionality for 8 months. On the other hand, the count cell of powders stored at 22 °C was below the minimum level required after 6 months. The fatty acids profile was not significantly (P > 0.05) affected by storage time and temperature. CONCLUSION: A new almond‐based‐product with probiotics was developed to meet consumer demands. Almond nutrients were recovered from almond milk powder and were found to be a good source of K and high in Mg and in monounsaturated fat. The viability of bacteria was assured during 8 months of storage at 4 °C and up to 6 months for samples stored at 22 °C. © 2020 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

Abstract: BACKGROUND: One of the best preservation method for long‐term storage is drying. In this work, the influence of different drying methods on aroma and sensory profile of shiitake mushroom was evaluated. The drying methods tested were: convective drying (CD), freeze‐drying (FD), vacuum‐microwave drying (VMD), and a combination of convective pre‐drying and vacuum–microwave finish‐drying (CPD‐VMFD). RESULTS: The volatile composition of fresh and dried shiitake mushrooms was analysed by SPME, GC–MS and GC‐FID, and showed the presence of 71 volatile compounds, most of them present in all dried samples but with quantitative variation. The major volatile compounds in fresh shiitake were 1‐octen‐3‐ol (20.2%), 2‐octanone (20.7%), 1,2,4‐trithiolane (9.8%), and 1,2,3,5,6‐pentathiepane (8.2%). Drying of shiitake mushrooms caused significant losses of C8 compounds and cyclic sulfur compounds, such as 1,2,4‐trithiolane (V31) and 1,2,4,5‐tetrathiane (V57). Samples dried at CD 80 °C implied a relative short drying time (120 min), had the highest contents of total volatiles (1594 μg 100 g−1) and cyclic sulfur compounds (e.g. V57 126 μg 100 g−1), and the highest intensity of most of the key positive sensory attributes, such as inner colour (7.0), fresh shiitake flavour (6.7), and sponginess (6.2). CONCLUSION: The best dehydration methods, resulting in the highest total concentrations of volatile compounds and high intensity of key sensory attributes were FD (if vacuum and liquid nitrogen facilities are available) and CD at 80 °C (for companies with vacuum and liquid nitrogen facilities). © 2017 Society of Chemical Industry [ABSTRACT FROM AUTHOR]