Search

Comparison of defect-controlled leaching-kinetics modulation of metal-organic frameworks (MOFs) and porous functionalized silica-based materials was performed on the example of a radionuclide and radionuclide surrogate for the first time, revealing an unprecedented readsorption phenomenon. On a series of zirconium-based MOFs as model systems, we demonstrated the ability to capture and retain99% of the transuranic

Atomically dispersed noble metal catalysts have drawn wide attention as candidates to replace supported metal clusters and metal nanoparticles. Atomic dispersion can offer unique chemical properties as well as maximum utilization of the expensive metals. Addition of a second metal has been found to help reduce the size of Pt ensembles in bimetallic clusters; however, the stabilization of isolated Pt atoms in small nests of nonprecious metal atoms remains challenging. We now report a novel strategy for the design, synthesis, and characterization of a zeolite-supported propane dehydrogenation catalyst that incorporates predominantly isolated Pt atoms stably bonded within nests of Zn atoms located within the nanoscale pores of dealuminated zeolite Beta. The catalyst is stable in long-term operation and exhibits high activity and high selectivity to propene. Atomic resolution images, bolstered by X-ray absorption spectra, demonstrate predominantly atomic dispersion of the Pt in the nests and, with complementary infrared and nuclear magnetic resonance spectra, determine a structural model of the nested Pt.

Methanol carbonylation to acetic acid (AA) is a large-scale commodity chemical production process that requires homogeneous liquid-phase organometallic catalysts with corrosive halide-based cocatalysts to achieve high selectivity and activity. Here, we demonstrate a heterogeneous catalyst based on atomically dispersed rhenium (ReO4) active sites on an inert support (SiO2) for the halide-free, gas phase carbonylation of methanol to AA. Atomically dispersed ReO4 species and nanometer sized ReOx clusters were deposited on a high surface area (700 m2/g) inert SiO2 using triethanolamine as a dispersion promoter and characterized using aberration corrected scanning transmission electron microscopy (AC-STEM), UV-vis spectroscopy, and X-ray absorption spectroscopy (XAS). Reactivity measurements at atmospheric pressure with 30 mbar of methanol and CO (1:1 molar ratio) showed that bulk Re2O7 and ReOx clusters on SiO2 (formed at >10 wt %) were selective for dimethyl ether formation, while atomically dispersed ReO4 on SiO2 (formed at 93% selectivity to AA with single pass conversion >60%. Kinetic analysis, in situ FTIR, and in situ XAS measurements suggest that the AA formation mechanism involves methanol activation on ReO4, followed by CO insertion into the terminal methyl species. Further, the introduction of ∼0.2 wt % of atomically dispersed Rh to 10 wt % atomically dispersed ReO4 on SiO2 resulted in >96% selectivity toward AA production at volumetric reaction rates comparable to homogeneous processes. This work introduces a new class of promising heterogeneous catalysts based on atomically dispersed ReO4 on inert supports for alcohol carbonylation.

Targeting chemokine signaling is an attractive avenue for the treatment of inflammatory disorders. Tyrosine sulfation is an important post-translational modification (PTM) that enhances chemokine-receptor binding and is also utilized by a number of pathogenic organisms to improve the binding affinity of immune-suppressive chemokine binding proteins (CKBPs). Here we report the display selection of tyrosine-sulfated cyclic peptides using a reprogrammed genetic code to discover high-affinity ligands for the chemokine CCL11 (eotaxin-1). The selected cyclic sulfopeptides possess high affinity for the target chemokine (as well as one or more of the related family members CCL2, CCL7 and CCL24) and inhibit CCL11 activation of CC chemokine receptor 3 (CCR3). This work demonstrates the utility of exploiting native PTMs as binding motifs for the generation of new leads for medicinal chemistry.

The electrochemical nitrate reduction reaction (NO

Low-temperature removal of noxious environmental emissions plays a critical role in minimizing the harmful effects of hydrocarbon fuels. Emission-control catalysts typically consist of large quantities of rare, noble metals (e.g., platinum and palladium), which are expensive and environmentally damaging metals to extract. Alloying with cheaper base metals offers the potential to boost catalytic activity while optimizing the use of noble metals. In this work, we show that Pt

Atomically dispersed supported metal catalysts offer new properties and the benefits of maximized metal accessibility and utilization. The characterization of these materials, however, remains challenging. Using atomically dispersed platinum supported on crystalline MgO (chosen for its well-defined bonding sites) as a prototypical example, we demonstrate how systematic density functional theory calculations for assessing all the potentially stable platinum sites, combined with automated analysis of extended X-ray absorption fine structure (EXAFS) spectra, leads to unbiased identification of isolated, surface-enveloped platinum cations as the catalytic species for CO oxidation. The catalyst has been characterized by atomic-resolution imaging and EXAFS and high-energy resolution fluorescence detection X-ray absorption near edge spectroscopy. The proposed platinum sites are in agreement with experiment. This theory-guided workflow leads to rigorously determined structural models and provides a more detailed picture of the structure of the catalytically active site than what is currently possible with conventional EXAFS analyses. As this approach is efficient and agnostic to the metal, support, and catalytic reaction, we posit that it will be of broad interest to the materials characterization and catalysis communities.

Catalysts consisting of atomically dispersed Pt (Ptiso) species on CeO2 supports have received recent interest due to their potential for efficient metal utilization in catalytic convertors. However, discrepancies exist between the behavior (reducibility, interaction strength with adsorbates) of high surface area Ptiso/CeO2 systems and of well-defined surface science and computational model systems, suggesting differences in Pt local coordination in the two classes of materials. Here, we reconcile these differences by demonstrating that high surface area Ptiso/CeO2 synthesized at low Pt loadings ( 0.1 weight % produce a distribution of sub-nanometer Pt structures, which are difficult to distinguish using common characterization techniques, and exhibit strong interactions with CO and weak resistance to sintering, even in 0.05 bar H2 at 50 °C-properties previously seen for high surface area materials. This work demonstrates that low metal loadings can be used to selectively populate the most thermodynamically stable adsorption sites on high surface area supports with atomically dispersed metals. Further, the site uniformity afforded by this synthetic approach is critical for the development of relationships between atomic scale local coordination and functional properties. Comparisons to recent studies of Ptiso/TiO2 suggest a general compromise between the stability of atomically dispersed metal catalysts and their ability to interact with and activate molecular species.

Rh-based catalysts have shown promise for the direct conversion of syngas to higher oxygenates. Although improvements in higher oxygenate yield have been achieved by combining Rh with metal oxide p...

The effect of dynamic reorganization and confinement of isolated TiIV catalytic centers supported on silicates is investigated for olefin epoxidation. Active sites consist of grafted single-site ca...

Methanol carbonylation to acetic acid (AA) is a large-scale commodity chemical production process that requires homogeneous liquid-phase organometallic catalysts with corrosive halide-based cocatalysts to achieve high selectivity and activity. Here, we demonstrate a heterogeneous catalyst based on atomically dispersed rhenium (ReO

CO2 reduction to higher value products is a promising way to produce fuels and key chemical building blocks while reducing CO2 emissions. The reaction at atmospheric pressure mainly yields CH4 via methanation and CO via the reverse water-gas shift (RWGS) reaction. Describing catalyst features that control the selectivity of these two pathways is important to determine the formation of specific products. At the same time, identification of morphological changes occurring to catalysts under reaction conditions can be crucial to tune their catalytic performance. In this contribution we investigate the dependency of selectivity for CO2 reduction on the size of Ru nanoparticles (NPs) and on support. We find that even at rather low temperatures (210 °C), oxidative pretreatment induces redispersion of Ru NPs supported on CeO2 and leads to a complete switch in the performance of this material from a well-known selective methanation catalyst to an active and selective RWGS catalyst. By utilizing in situ X-ray abso...

An antimicrobial activity screen of Burkholderia gladioli BCC0238, a clinical isolate from a cystic fibrosis patient, led to the discovery of gladiolin, a novel macrolide antibiotic with potent activity against Mycobacterium tuberculosis H37Rv. Gladiolin is structurally related to etnangien, a highly unstable antibiotic from Sorangium cellulosum that is also active against Mycobacteria. Like etnangien, gladiolin was found to inhibit RNA polymerase, a validated drug target in M. tuberculosis. However, gladiolin lacks the highly labile hexaene moiety of etnangien and was thus found to possess significantly increased chemical stability. Moreover, gladiolin displayed low mammalian cytotoxicity and good activity against several M. tuberculosis clinical isolates, including four that are resistant to isoniazid and one that is resistant to both isoniazid and rifampicin. Overall, these data suggest that gladiolin may represent a useful starting point for the development of novel drugs to tackle multidrug-resistant tuberculosis. The B. gladioli BCC0238 genome was sequenced using Single Molecule Real Time (SMRT) technology. This resulted in four contiguous sequences: two large circular chromosomes and two smaller putative plasmids. Analysis of the chromosome sequences identified 49 putative specialized metabolite biosynthetic gene clusters. One such gene cluster, located on the smaller of the two chromosomes, encodes a trans-acyltransferase (trans-AT) polyketide synthase (PKS) multienzyme that was hypothesized to assemble gladiolin. Insertional inactivation of a gene in this cluster encoding one of the PKS subunits abrogated gladiolin production, confirming that the gene cluster is responsible for biosynthesis of the antibiotic. Comparison of the PKSs responsible for the assembly of gladiolin and etnangien showed that they possess a remarkably similar architecture, obfuscating the biosynthetic mechanisms responsible for most of the structural differences between the two metabolites.

Catalysts consisting of atomically dispersed Pt (Pt

Rh-based catalysts have shown promise for the direct conversion of syngas to higher oxygenates. Although improvements in higher oxygenate yield have been achieved by combining Rh with metal oxide promoters, details of the structure of the promoted catalyst and the role of the promoter in enhancing catalytic performance are not well understood. In this work, we show that MoO

This Article describes the development of a base-free, nickel-catalyzed decarbonylative coupling of carboxylic acid fluorides with diboron reagents to selectively afford aryl boronate ester products. Detailed studies were conducted to assess the relative rates of direct transmetalation between aryl boronate esters and diboron reagents and a bisphosphine nickel(aryl)(fluoride) intermediate. These investigations revealed that diboron reagents undergo transmetalation with this Ni(aryl)(fluoride) intermediate at rates significantly faster than their aryl boronate ester congeners. Furthermore, the reactivity of both boron reagents toward transmetalation is enhanced with increasing electrophilicity of the boron center. These mechanistic insights were leveraged to develop a catalytic decarbonylative borylation of acid fluorides that proved applicable to a variety of (hetero)aryl carboxylic acid fluorides as well as diverse diboron reagents. The acid fluorides can be generated

The effect of dynamic reorganization and confinement of isolated Ti

CO

Selective oxidations are crucial for the creation of valuable chemical building blocks but often require expensive and unstable stoichiometric oxidants such as hydroperoxides and peracids. To date, many catalysts that contain a single type of active site have not been able to attain the desired level of selectivity for partially oxidized products over total combustion. However, catalysts containing multiple types of active sites have proven to be successful for selective reactions. One category of such catalysts is bimetallic alloys, in which catalytic activity and selectivity can be tuned by modifying the surface composition. Traditional catalyst synthesis methods using impregnation struggle to create catalysts with sufficient control over surface chemistry to accurately tune the ensemble size of the desired active sites. Here we describe the synthesis of colloidal nanocrystals of dilute alloys of palladium and gold. We show that when supported on titania (TiO2), tuning the composition of the Pd/Au nanoc...