Search

Dinuclear Pt(III) complexes were commonly reported to have short-lived lowest-lying triplet states, resulting in extremely weak or no photoluminescence. To overcome this obstacle, a new series of dinuclear Pt(III) complexes, named Pt2a-Pt2c, were strategically designed and synthesized using donor (D)-acceptor (A)-type oxadiazole-thiol chelates as bridging ligands. These dinuclear Pt(III) complexes possess a d7-d7 electronic configuration and exhibit intense phosphorescence under ambient conditions. Among them, Pt2a exhibits orange phosphorescence maximized at 618 nm in degassed dichloromethane solution (Φp ≈ 8.2%, τp ≈ 0.10 μs) and near-infrared (NIR) emission at 749 nm (Φp ≈ 10.1% τp ≈ 0.66 μs) in the crystalline powder and at 704 nm (Φp ≈ 33.1%, τp ≈ 0.34 μs) in the spin-coated neat film. An emission blue-shifted by more than 3343 cm-1 is observed under mechanically ground crystalline Pt2a, affirming intermolecular interactions in the solid states. Time-dependent density functional theory (TD-DFT) discloses the lowest-lying electronic transition of Pt2a-Pt2c complexes to be a bridging ligand-metal-metal charge transfer (LMMCT) transition. The long-lived triplet states of these dinuclear platinum(III) complexes may find potential use in lighting. Employing Pt2a as an emitter, high-performance organic light-emitting diodes (OLEDs) were fabricated with NIR emission at 716 nm (η = 5.1%), red emission at 614 nm (η = 8.7%), and white-light emission (η = 11.6%) in nondoped, doped (in mCP), and hybrid (in CzACSF) devices, respectively.

Two new 1,2-azaborine building blocks that enable the broad diversification of previously not readily accessible C4 and C5 ring positions of the 1,2-azaborine heterocycle are developed. 1,2-Azaborine's distinct electronic structure allowed the resolution of a mixture of C4- and C5-borylated 1,2-azaborines. The connection between the electronic structure of C4 and C5 positions of 1,2-azaborine and their distinct reactivity patterns is revealed by a combination of reactivity studies and kinetic measurements that are supported by DFT calculations. Specifically, we show that oxidation by N-methylmorpholine N-oxide (NMO) is selective for the C4-borylated 1,2-azaborine, and the Ir-catalyzed deborylation is selective for the C5-borylated 1,2-azaborine via kinetically controlled processes. On the other hand, ligand exchange with diethanolamine takes place selectively with the C4-borylated isomer via a thermodynamically controlled process. These results represent the first examples for chemically distinguishing a mixture of two aryl mono-Bpin-substituted isomers.

A concise synthesis of monobenzofused 1,4-azaborine phosphine ligands (Senphos) is described. These Senphos ligands uniquely support Pd-catalyzed trans-selective hydroboration of terminal and internal 1,3-enynes to furnish corresponding dienylboronates in high efficiency and diastereoselectivity. X-ray structural analysis of the Senphos–Pd(0) complex reveals a κ2-P-η2-BC coordination mode, and this isolated complex has been shown to serve as a competent catalyst for the trans-hydroboration reaction. This work demonstrates that the expanded chemical space provided by the BN/CC isosterism approach translates into the functional space in the context of stereoselective catalytic transformations.

We report the design strategy and synthesis of a structurally locked GFP core chromophore p-LHBDI, its ortho-derivative, o-LHBDI, and H2BDI possessing both para- and ortho-hydroxyl groups such that the inherent rotational motion of the titled compounds has been partially restricted. o-LHBDI possesses a doubly locked configuration, i.e., the seven-membered ring hydrogen bond and five-membered ring C(4-5-10-13-14) cyclization, from which the excited-state intramolecular proton transfer takes place, rendering a record high tautomer emission yield (0.18 in toluene) and the generation of amplified spontaneous emission. Compared with their unlocked counterparts, a substantial increase in the emission yield is also observed for p-LHBDI and H2BDI in anionic forms in water, and accordingly the structure versus luminescence relationship is fully discussed based on their chemistry and spectroscopy aspect. In solid, o-LHBDI exhibits an H-aggregate-like molecular packing, offers narrow-bandwidth emission, and has been successfully applied to fabricate a yellow organic light emitting diodes (λmax = 568 nm, ηext = 1.9%) with an emission full width at half-maximum as narrow as 70 nm.

The first general late-stage functionalization of monocyclic 1,2-azaborines at the C(6) position is described. Ir-catalyzed C-H borylation occurs regioselectively at the C(6) position of B-substituted 1,2-azaborines and is compatible with a range of substitution patterns at boron (e.g., hydride, alkoxide, alkyl, and aryl substituents). Subsequent Suzuki cross coupling with aryl- and heteroaryl bromides furnishes 1,2-azaborine-based biaryl compounds including 6-[pyrid-2-yl]-1,2-azaborines that represent novel κ(2)-N,N-bidentate ligands. The 6-[pyrid-2-yl]-B-Me-1,2-azaborine ligand has been demonstrated to form an emissive coordination complex with dimesitylboron that exhibits bathochromically shifted absorption and emission maxima and a higher photoluminescence quantum yield compared to its carbonaceous analogue.

A critical component for the successful development of fuel cell applications is hydrogen storage. For back-up power applications, where long storage periods under extreme temperatures are expected, the thermal stability of the storage material is particularly important. Here, we describe the development of an unusually kinetically stable chemical hydrogen storage material with a H2 storage capacity of 4.7 wt%. The compound, which is the first reported parental BN isostere of cyclohexane featuring two BN units, is thermally stable up to 150 °C both in solution and as a neat material. Yet, it can be activated to rapidly desorb H2 at room temperature in the presence of a catalyst without releasing other detectable volatile contaminants. We also disclose the isolation and characterization of two cage compounds with S4 symmetry from the H2 desorption reactions.

International audience; The synthesis of two parental BN anthracenes, 1 and 2, was developed, and their electronic structure and reactivity behavior were characterized in direct comparison with all-carbon anthracene. Gas-phase UV-photoelecton spectroscopy studies revealed the following HOMO energy trend: anthracene, -7.4 eV; BN anthracene 1, -7.7 eV; bis-BN anthracene 2, -8.0 eV. The λmax of the lower energy band in the UV-vis absorption spectrum is as follows: anthracene, 356 nm; BN anthracene 1, 359 nm; bis-BN anthracene 2, 357 nm. Thus, although the HOMO is stabilized with increasing BN incorporation, the HOMO-LUMO band gap remains unchanged across the anthracene series. The emission λmax values for the three investigated anthracene compounds are at 403 nm. The pKa values of the N-H proton for BN anthracene 1 and bis-BN anthracene 2 were determined to be approximately 26. BN anthracenes 1 and 2 do not undergo heat- or light-induced cycloaddition reactions or Friedel-Crafts acylations. Electrophilic bromination of BN anthracene 1 with Br2, however, occurs regioselectively at the 9-position. The reactivity behavior and regioselectivity of bromination of BN anthracenes are consistent with the electronic structure of these compounds; i.e., (1) the lower HOMO energy levels for BN anthracenes stabilize the molecules against cycloaddition and Friedel-Crafts reactions, and (2) the HOMO orbital coefficients are consistent with the observed bromination regioselectivity. Overall, this work demonstrates that BN/CC isosterism can be used as a molecular design strategy to stabilize the HOMO of acene-type structures while the optical band gap is maintained. © 2014 American Chemical Society.

Aromatic and single-olefin six-membered BN heterocycles were synthesized, and the heats of hydrogenation were measured calorimetrically. A comparison of the hydrogenation enthalpies of these compounds revealed that 1,2-azaborines have a resonance stabilization energy of 16.6 ± 1.3 kcal/mol, in good agreement with calculated values.

International audience; We present a comprehensive electronic structure analysis of structurally simple BN heterocycles using a combined UV-photoelectron spectroscopy (UV-PES)/computational chemistry approach. Gas-phase He I photoelectron spectra of 1,2-dihydro-1,2-azaborine 1, N-Me-1,2-BN-toluene 2, and N-Me-1,3-BN-toluene 3 have been recorded, assessed by density functional theory calculations, and compared with their corresponding carbonaceous analogues benzene and toluene. The first ionization energies of these BN heterocycles are in the order N-Me-1,3-BN-toluene 3 (8.0 eV) < N-Me-1,2-BN-toluene 2 (8.45 eV) < 1,2-dihydro-1,2-azaborine 1 (8.6 eV) < toluene (8.83 eV) < benzene (9.25 eV). The computationally determined molecular dipole moments are in the order 3 (4.577 D) > 2 (2.209 D) > 1 (2.154 D) > toluene (0.349 D) > benzene (0 D) and are consistent with experimental observations. The λ max in the UV-vis absorption spectra are in the order 3 (297 nm) > 2 (278 nm) > 1 (269 nm) > toluene (262 nm) > benzene (255 nm). We also establish that the measured anodic peak potentials and electrophilic aromatic substitution (EAS) reactivity of BN heterocycles 1-3 are consistent with the electronic structure description determined by the combined UV-PES/computational chemistry approach.

We present the first synthesis and characterization of a 1,3-dihydro-1,3-azaborine, a long-sought BN isostere of benzene. 1,3-Dihydro-1,3-azaborine is a stable structural motif with considerable aromatic character as evidenced by structural analysis and its reaction chemistry. Single crystal X-ray analysis indicates bonding consistent with significant electron delocalization. 1,3-Dihydro-1,3-azaborines also undergo nucleophilic substitutions at boron and electrophilic aromatic substitution reactions. In view of the versatility and impact of aromatic compounds in the biomedical field and in materials science, the present study further expands the available chemical space of arenes via BN/CC isosterism.

The current state-of-the-art for hydrogen storage is compressed H(2) at 700 bar. The development of a liquid-phase hydrogen storage material has the potential to take advantage of the existing liquid-based distribution infrastructure. We describe a liquid-phase hydrogen storage material that is a liquid under ambient conditions (i.e., at 20 °C and 1 atm pressure), air- and moisture-stable, and recyclable; releases H(2) controllably and cleanly at temperatures below or at the proton exchange membrane fuel cell waste-heat temperature of 80 °C; utilizes catalysts that are cheap and abundant for H(2) desorption; features reasonable gravimetric and volumetric storage capacity; and does not undergo a phase change upon H(2) desorption.

BN/CC isosterism has emerged as a viable strategy to increase the structural diversity of carbon-based compounds. We present the first synthesis and characterization of the parent 1,2-BN cyclohexane, the BN-isostere of cyclohexane. 1,2-BN cyclohexane is an air- and water-stable compound that cleanly forms a trimer with release of dihydrogen when thermally activated. We also demonstrate that 1,2-BN cyclohexane has a lower activation barrier for ring inversion than cyclohexane due to BN/CC isosterism.

"Fused" BN indoles are an emerging class of boron-containing indole mimics, featuring geometric structure and electophilic aromatic substitution reactivity similar to those of indoles but exhibiting distinct electronic structure, leading to unique optoelectronic properties. Herein we report the synthesis of the parent N-H BN indole and provide a head-to-head comparison of the structural features, pK(a) values, and optoelectronic properties of this hybrid organic/inorganic indole with the classic natural indole.

The first microwave spectrum for 1,2-dihydro-1,2-azaborine has been measured in the frequency range 7-18 GHz, providing accurate rotational constants and nitrogen and boron quadrupole coupling strengths for three isotopomers, H(6)C(4)(11)B(14)N, H(6)C(4)(10)B(14)N, and H(5)DC(4)(11)B(14)N. The measured rotational constants were used to accurately determine coordinates for the substituted atoms and provide sufficient data to determine most of the important structural parameters for this molecule. The spectra were obtained using a pulsed beam Fourier transform microwave spectrometer, with sufficient resolution to allow accurate measurements of (14)N, (11)B, and (10)B nuclear quadrupole hyperfine interactions. High-level ab initio calculations provided structural parameters and quadrupole coupling strengths that are in very good agreement with measured values. The rotational constants for the parent compound are A = 5657.335(1), B = 5349.2807(5), and C = 2749.1281(4) MHz, yielding the inertial defect Delta(0) = 0.02 amu x A(2) for the ground-state structure. The observed near-zero and positive inertial defect clearly indicates that the molecular structure of 1,2-dihydro-1,2-azaborine is planar. The least-squares fit analysis to determine the azaborine ring structure yielded the experimental bond lengths and 2sigma errors R(B-N) = 1.45(3) A, R(B-C) = 1.51(1) A, and R(N-C) = 1.37(3) A for the ground-state structure. Interbond angles for the ring were also determined. An extended Townes-Dailey population analysis of the boron and nitrogen quadrupole coupling constants provided the valence p-electron occupancy p(c) = 0.3e for boron and p(c) = 1.3e for nitrogen.

A diiron(II) model compound having features relevant to the active sites of the reduced forms of the polyiron-oxo proteins hemerythrin (Hr), ribonucleotide reductase (RR), and methane monooxygenase (MMO) has been prepared and characterized by elemental analysis, X-ray crystallography, magnetic susceptibility measurements, and Mossbauer, UV-vis, IR, 1 H NMR, and RPT spectroscopy