Search

Elucidation of the details of the associating mode is one of the major concerns for the precise design of DNA-binding molecules that are used for gene regulation. Pyrrole-imidazole polyamide (PIP) is a well-established synthetic DNA-binding molecule that has sequence-specificity for duplex DNA. By the design of the sequence of pyrrole, imidazole, and other synthetic units, PIP is bound to the target DNA sequence selectively. Here, we report the X-ray crystal structure of newly synthesized chiral cyclic PIP (cPIP) complexed with DNA at 1.5 A resolution and reveal that cPIP binds in the reverse orientation in the DNA minor groove. Analysis of the crystal structure revealed that the positions of the hydrogen bonds between the bases and the pyrrole-imidazole moieties of cPIP were similar for both forward- and reverse-binding orientations and that the distortion of the B-form DNA structure caused by cPIP binding was also similar for both orientations. We further found that new hydrogen bonds formed between the amino groups on the γ-turn units and DNA at both ends of the cPIP molecule. Additionally, by comparing the reverse PIP orientation with the forward orientation, we could clarify that the cause of the preference toward the reverse orientation in the S-form cPIP as used in this study is the overall conformation of the cPIP-DNA complex, particularly the configuration of hydrogen bonds. These results thus provide an explanation for the different stereoselectivity of cPIP binding in the minor groove.

For proteins and DNA secondary structures such as G-quadruplexes and i-motifs, nanoconfinement can facilitate their folding and increase structural stabilities. However, the properties of the physiologically prevalent B-DNA duplex have not been elucidated inside the nanocavity. Using a 17-bp DNA duplex in the form of a hairpin stem, here, we probed folding and unfolding transitions of the hairpin DNA duplex inside a DNA origami nanocavity. Compared to the free solution, the DNA hairpin inside the nanocage with a 15 × 15 nm cross section showed a drastic decrease in mechanical (20 → 9 pN) and thermodynamic (25 → 6 kcal/mol) stabilities. Free energy profiles revealed that the activation energy of unzipping the hairpin DNA duplex decreased dramatically (28 → 8 kcal/mol), whereas the transition state moved closer to the unfolded state inside the nanocage. All of these indicate that nanoconfinement weakens the stability of the hairpin DNA duplex to an unexpected extent. In a DNA hairpin made of a stem that contains complementary telomeric G-quadruplex (GQ) and i-motif (iM) forming sequences, formation of the Hoogsteen base pairs underlining the GQ or iM is preferred over the Watson-Crick base pairs in the DNA hairpin. These results shed light on the behavior of DNA in nanochannels, nanopores, or nanopockets of various natural or synthetic machineries. It also elucidates an alternative pathway to populate noncanonical DNA over B-DNA in the cellular environment where the nanocavity is abundant.

To examine the effect of the torsional constraints imposed on DNA substrates on Cas9 cleavage, we prepared constrained DNA substrates using a DNA origami frame. By fixing the dsDNA at the connectors of the DNA frame, we created torsionally constrained or relaxed substrates. We quantified the cleavage of constrained and relaxed substrates by Cas9 with qPCR. Moreover, we observed the Cas9/sgRNA complex bound to the DNA substrates and characterized the dissociation of the complex with high-speed atomic force microscopy. The results revealed that the constrained nontarget strand reduced the cleavage efficiency of Cas9 drastically, whereas torsional constraints on the target strand had little effect on the cleavage. The present study suggests that highly ordered and constrained DNA structures could be obstacles for Cas9 and additionally provides insights in Cas9 dissociation at a single molecule level.

Site-specific recombination involves reciprocal exchange between defined DNA sites. The reaction initiates from the formation of a recombinase-DNA synaptic complex, in which two recombination sites arrange in an appropriate configuration. However, there is incomplete information about how the topological state of the substrate influences the synapsis and outcome of the reaction. Here, we show that Cre-mediated recombination can be regulated by controlling the orientation and topology of the loxP substrate in a DNA frame nanoscaffold. High-speed atomic force microscopy analyses revealed that the loxP-containing substrate strands in the antiparallel orientation can be recombined only through formation of synaptic complexes. By tethering Holliday junction (HJ) intermediates to DNA frames in different connection patterns and using them as a starting substrate, we found that the topological state of the HJ intermediates dictates the outcome of the resolution. Our approach should provide a new platform for structural-functional studies of various DNA targeting enzymes, especially which require formation of synaptic complexes.

HIV-1 nucleocapsid proteins (NCps) facilitate remodeling of nucleic acids to fold thermodynamically stable conformations, and thus called nucleic acid chaperones. To date only little is known on the stoichiometry, NCp-NCp interactions, chaperone activity on G-quadruplex formation, and so on. We report here the direct and real-time analysis on such properties of proteolytic intermediate NCp15 and mature NCp7 using DNA origami. The protein particles were found to predominantly exist in monomeric form, while dimeric and multimeric forms were also observed both in free solution and bound to the quadruplex structure. The formation and the dissociation events of the G-quadruplexes were well documented in real-time and the intermediate-like states were also visualized. We anticipate that this pioneering study will strengthen our understanding on the chaperone activity of HIV-1 proteins which in turn will be helpful for the drug design based on G-quadruplex and also for the development of drugs against AIDS.

Analogous to the biologically abundant protein-based linear molecular machines that translocate along their target surface, we have recently constructed the DNA-based synthetic molecular motors that effect linear movement or navigate a network of tracks on a DNA origami substrate. However, a DNA-based molecular machine with rotary function, analogous to rotary proteins, is still unexplored. Here, we report the construction of a rotary motor based on the B-Z conformational transition of DNA and the direct and real-time observation of its function within a frame-shaped DNA origami. The motor can be switched off by introducing conditions that stabilize B-DNA, while it can be fueled by adding Z-DNA-promoting high-saline buffer. When MgCl(2) was used as external stimulus, 70% of the motors rotated, while 76% of the stators/controls exhibited no rotation. Such a motor system could be successfully applied to perform multiple actions aimed for our benefit. Moreover, for the first time we have directly observed the B-Z conformational transition of DNA in real-time, which shed light on the fundamental understanding of DNA conformations.

We demonstrate a novel strategy for constructing multidirectional programmed 2D DNA nanostructures in various unique patterns by introducing photoresponsive oligonucleotides (Azo-ODNs) into hexagonal DNA origami structures. We examined regulation of assembly and disassembly of DNA nanostructures reversibly by different photoirradiation conditions in a programmed manner. Azo-ODNs were incorporated to the hexagonal DNA origami structures, which were then employed as self-assembly units for building up nanosized architectures in regulated arrangements. By adjusting the numbers and the positions of Azo-ODNs in the hexagonal units, the specific nanostructures with face controlling can be achieved, resulting in construction of ring-shaped nanostructures. By combining DNA origami strategy with photoregulating system, remote controlling of assembly and disassembly of DNA nanostructures has been accomplished simply by photo irradiation.

Heat tolerance of DNA origami structures has been improved about 30 °C by photo-cross-linking of 8-methoxypsoralen. To demonstrate one of its applications, the cross-linked origami were used for higher-temperature self-assembly, which markedly increased the yield of the assembled product when compared to the self-assembly of non-cross-linked origami at lower-temperature. By contrast, at higher-temperature annealing, native non-cross-linked tiles did not self-assemble to yield the desired product; however, they formed a nonspecific broken structure.

A novel strategy for regulation of an enzymatic DNA modification reaction has been developed by employing a designed nanoscale DNA scaffold. DNA modification using enzymes often requires bending of specific DNA strands to facilitate the reaction. The DNA methylation enzyme EcoRI methyltransferase (M.EcoRI) bends double helix DNA by 55 degrees-59 degrees during the reaction with flipping out of the second adenine in the GAATTC sequence as the methyl transfer reaction proceeds. In this study, two different double helical tensions, tense and relaxed states of double helices, were created to control the methyl transfer reaction of M.EcoRI and examine the structural effect on the methylation. We designed and prepared a two-dimensional (2D) DNA scaffold named the "DNA frame" using the DNA origami method that accommodates two different lengths of the double-strand DNA fragments, a tense 64mer double strand and a relaxed 74mer double strand. Fast-scanning atomic force microscope (AFM) imaging revealed the different dynamic movement of the double-strand DNAs and complexes of M.EcoRI with 64mer and 74mer double-strand DNAs. After treatment of the double strands in the DNA frame with M.EcoRI and the subsequent digestion with restriction enzyme EcoRI (R.EcoRI), AFM analysis revealed that the 74mer double-strand DNA was not effectively cleaved compared with the 64mer double-strand DNA, indicating that the methylation preferentially occurred in the relaxed 74mer double-strand DNA compared with that in the tense 64mer double strand. Biochemical analysis of the methylation and specific digestion using a real-time PCR also supported the above results. These results indicate the importance of the structural flexibility for bending of the duplex DNA during the methyl transfer reaction with M.EcoRI. Therefore, the DNA methylation can be regulated using the structurally controlled double-strand DNAs constructed in the DNA frame nanostructure.

Here, we report the direct visualization of the assembly/disassembly processes of photoresponsive DNA origami nanostructures which can be placed on a lipid bilayer surface. The observation relies on controlled interactions between the bilayer components and cholesterol moieties introduced to the hexagonal origami structures, one of whose outer edges carries Azo-ODNs. The bilayer-placed hexagonal dimer was disassembled into monomer units by UV irradiation, and reversibly assembled again during visible light irradiation. These dynamic processes were directly monitored with high-speed atomic force microscopy. The successful application of our approach should facilitate studies of interactive and functional behaviors of various DNA nanostructures.

We herein report the real-time observation of G-quadruplex formation by monitoring the G-quadruplex-induced global change of two duplexes incorporated in a DNA nanoscaffold. The introduced G-rich strands formed an interstrand (3 + 1) G-quadruplex structure in the presence of K(+), and the formed four-stranded structure was disrupted by removal of K(+). These conformational changes were visualized in a nanoscaffold in real-time with fast-scanning atomic force microscopy.

We demonstrate a novel strategy for visualizing sequence-selective alkylation of target double-stranded DNA (dsDNA) using a synthetic pyrrole-imidazole (PI) polyamide in a designed DNA origami scaffold. Doubly functionalized PI polyamide was designed by introduction of an alkylating agent 1-(chloromethyl)-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI) and biotin for sequence-selective alkylation at the target sequence and subsequent streptavidin labeling, respectively. Selective alkylation of the target site in the substrate DNA was observed by analysis using sequencing gel electrophoresis. For the single-molecule observation of the alkylation by functionalized PI polyamide using atomic force microscopy (AFM), the target position in the dsDNA (∼200 base pairs) was alkylated and then visualized by labeling with streptavidin. Newly designed DNA origami scaffold named "five-well DNA frame" carrying five different dsDNA sequences in its cavities was used for the detailed analysis of the sequence-selectivity and alkylation. The 64-mer dsDNAs were introduced to five individual wells, in which target sequence AGTXCCA/TGGYACT (XY = AT, TA, GC, CG) was employed as fully matched (X = G) and one-base mismatched (X = A, T, C) sequences. The fully matched sequence was alkylated with 88% selectivity over other mismatched sequences. In addition, the PI polyamide failed to attach to the target sequence lacking the alkylation site after washing and streptavidin treatment. Therefore, the PI polyamide discriminated the one mismatched nucleotide at the single-molecule level, and alkylation anchored the PI polyamide to the target dsDNA.

Novel multiarm DNA structures were designed using two-dimensional DNA origami scaffolds, and these structures were folded into hollow three-dimensional (3D) structures by introducing connection strands into the arms. The opening of the prism structures was examined by high-speed AFM imaging, which showed the dissociation of the connecting arms in the 3D structures.

Site-specific fluorescent labeling of RNA molecules was achieved by specific transcription using an unnatural base pair system. The unnatural base pairs between 2-amino-6-(2-thienyl)purine (s) and 2-oxo(1H)pyridine (y), and 2-amino-6-(2-thiazolyl)purine (v) and y function in transcription, and the substrates of y and 5-modified y bases can be site-specifically incorporated into RNA, opposite s or v in DNA templates, by T7 RNA polymerase. Ribonucleoside 5'-triphosphates of 5-fluorophore-linked y bases were chemically synthesized from the nucleoside of y. These fluorescent substrates were site-specifically incorporated into RNA by transcription mediated by the s-y and v-y pairs. By using this fluorescent labeling method, specific positions of Raf-binding and theophylline-binding RNA aptamers were fluorescently labeled, and the specific binding to their target molecules was detected by their fluorescent intensities. This site-specific labeling method using an unnatural base pair system will be useful for analyzing conformational changes of RNA molecules and for detecting interactions between RNA and its binding species.

The two-photon ionization (TPI) process (308 and 266 nm) of stilbene dendrimers having a stilbene core and benzyl ether type dendrons has been investigated in an acetonitrile and 1,2-dichloroethane mixture (3:1) in order to elucidate the dendrimer effects. The quantum yield of the formation of stilbene core radical cation during the 308-nm TPI was independent of the dendron generation of the dendrimers, whereas a generation dependence of the quantum yield of the radical cation was observed during the 266-nm TPI, where both the stilbene core and benzyl ether type dendron were ionized, suggesting that the subsequent hole transfer occurs from the dendron to the stilbene core, and that the dendron acts as a hole-harvesting antenna. The neutralization rate of the stilbene core radical cation with the chloride ion, generated from the dissociative electron capture by 1,2-dichloroethane, decreased with the increase in the dendrimer generation, suggesting that the dendron is an effective shield of the stilbene core radical cation against the chloride ion.

Stepwise photocleavage of two naphthylmethyl-oxygen bonds of 1,8-bis[(4-benzoylphenoxy)methyl]naphthalene (1,8-(BPO-CH2)2Np, 1) was observed during three-color, three-laser flash photolysis at room temperature. The mechanism from 1 to the final product, acenaphthene (2), was clearly elucidated. The first (308 nm, 5 mJ pulse-1) XeCl laser excited 1 to the lowest triplet excited state 1(T1), in which the excited energy was localized in the naphthalene moiety, but the C-O bond cleavage did not occur. The second (430 nm, 7 mJ pulse-1) OPO laser excited 1(T1) to the higher triplet excited states 1(Tn) in which the excited energy is delocalized in the naphthalene moiety and C-O bonds, and one C-O bond cleavage occurred. The third (355 nm, 10 mJ pulse-1) YAG laser excited the carbon-centered radical in the ground state 1-(BPO-CH2)NpCH2*(D0) to its excited states 1-(BPO-CH2)NpCH2*(Dn), from which the second C-O bond cleavage occurred to give 2 as the final product. This is a successful example of stepwise cleavage of two equivalent C-O bonds in a molecule using three-color three-laser photolysis method.

Disulfide cross-linked oligonucleotides for connecting two DNA double helixes have been designed, synthesized, and characterized. Employing these cross-linked oligonucleotides, two double helixes can be arranged side by side, and the orientations can be controlled both in parallel and antiparallel ways by addition of a specific complementary DNA strand.