Search

AgNbO3 is one of the prominent lead-free antiferroelectric (AFE) oxides, which readily exhibits a field-induced AFE to ferroelectric phase transition and thus a high energy storage density. The solid-statesynthesis of AgNbO3 is considered difficult and an oxidizing atmosphere is typically employed during AgNbO3 processing,on the premise that oxygen can prevent possible decomposition of the silver oxide at high temperatures. However, details about the influence of processing parameters on the functional properties of AFE AgNbO3 are insufficiently understood. In this work, the solid-state reaction of a stoichiometric AgO and Nb2O5 mixture was investigated. We found that ball milling can convert AgO into metallic Ag, which is beneficial for lowering the reaction temperature for the formation of the perovskite phase to 500‒600℃. Moreover, the influence of the processing atmosphere (air, O2, and N2) was investigated by thermal analysis and in situ X-ray diffraction. Since the reaction between Ag and Nb2O5 to form AgNbO3 requires oxygen uptake, AgNbO3 was only found to form in air and O2, whereby the kinetics were faster in the latter case. All the sintered AgNbO3 samples exhibited a similar crystallographic structure, although the samples processed in O2 had a lower oxygen vacancy concentration. Despite this, well-defined AFE double polarization loops were obtained in all cases. Our results indicate that decomposition of sliver oxide during ball milling is beneficial for the solid-state reaction, while a pure O2 atmosphere is not essential for the synthesis of high-quality AgNbO3. These findings may simplify the processing and facilitate further research of AgNbO3-based antiferroelectrics.

This study evaluates the change of flow stress as related to dislocation density in SrTiO3 single crystals in order to provide guidance for later electrical studies. The key parameters varied are temperature and loading rate during the deformation. It is found that in -oriented SrTiO3 single crystals, the dislocation density is enhanced by plastic deformation, more so at higher temperature as compared to room temperature. The experimental approach of quantifying the dislocation density through a determination of ex situ X-ray diffraction rocking curves was successfully applied over the upper temperatures region of the lower temperature ductility zone for strontium titanate, i.e., in the so-called “A-regime”. For 1.0% deformed samples deformed at 300°C, a fourfold increase in dislocation density to 1.4 3 1013 m – 1 was found as compared to the nondeformed state (3.7 3 1012 m – 1). Cross-section techniques confirmed that the observed dislocation densities measured at the surfaces were identical to those seen in the core of the crystals. The use of rapid changes in loading rate provided an estimate for activation volume of the dislocation core for both 25°C and 300°C.

The design of core–shell materials affords additional degrees of freedom to tailor functional properties as compared to solid solution counterparts. Although to date most of the work in core–shell materials has focused on dielectrics, piezoelectric core–shell ceramics may gain similar interest. Generalities of core–shell functional ceramics features are addressed in this work. A model system, Bi1/2Na1/2TiO3–SrTiO3, is introduced to discuss structure–property relationships. We demonstrate that this system features a core–shell microstructure for the composition corresponding to 25 at.% Sr. The material is studied by means of macroscopic functional properties and in situ structural characterization techniques at different length scales, such as X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The evolution of the core–shell with field and temperature determines its functional properties. The high strain of the system, ~0.3% at 4 kV/mm, is due to an electric-field-induced phase transition of the core and shell. Upon field removal the core remains in a poled state, whereas the shell is characterized by a reversible transformation. The reversibility of the phase transition of shells and associated switching are key features in the observed giant strain. Dielectric anomalies are found to be related to changes in oxygen octahedral tilting angles within the core and shell.