Search

Zirconate pyrochlores have been extensively studied as candidate waste forms for the immobilization of actinide wastes due to their flexible crystal chemistry, excellent structural stability, and exceptional radiation tolerance. Herein, we report the synthesis of a series of compounds Eu2Zr2–xO7–2x (x = 0–1, step = 0.125) using a co‐precipitation route to form solid solutions between the two end members, Eu2Zr2O7 pyrochlore and Eu2ZrO5 defect fluorite. It is important to understand the pyrochlore to defect fluorite transformation as a function of Zr/Ln molar ratio. The structural investigation by x‐ray diffraction has shown the increasing cation disorder and corresponding structural transitions from the ordered pyrochlore to disordered pyrochlore, then to defect fluorite. While diffuse reflectance spectroscopy provides similar optical absorption features reflecting the presence of Eu(III) ion, Raman spectroscopy has revealed more details on the phase transition and short‐range structures. This work highlights the structural flexibility in zirconate materials as potential nuclear waste forms for the immobilization of actinide‐rich waste streams, especially suitable for the separated minor actinides. [ABSTRACT FROM AUTHOR]

Y2Ti2−xSnxO7 (x = 0–2) pyrochlore sodium aluminoborosilicate glass–ceramics (GCs) are produced by calcining the pelletized Y–Ti–Sn oxide mixture and glass precursor at 1200 or 1300°C for 4 h. The metal oxide mixture is prepared by a soft chemistry route. X‐ray diffraction, Raman spectroscopy, and electron microscopy are employed to investigate the formation of pyrochlore GCs and local crystal structures. Near phase pure Ti‐rich pyrochlores are produced with minor phase SnO2 observed for Sn‐rich materials. The cell parameters of the pyrochlore structures refined by Le Bail fitting are in good agreement with the published data and increase linearly with the gradual increment of Sn substitution. With progressively increasing Sn proportion on pyrochlore B‐site, Raman characteristic bands of the pyrochlore structure become sharper and well defined. The Raman A1g peak position and its full width at half‐maximum are linearly progressed with increasing x (Sn). The presence of the melting glass facilitates the pyrochlore formation, with ceramic grain sizes ranging from submicron to microns. Transmission electron microscopy and selected area electron diffraction observations indicate the sample possesses a relatively high crystallographic perfection at the atomic level. This new series of pyrochlore GCs and the method disclosed herein may pave the way for further materials development as potential nuclear waste forms. [ABSTRACT FROM AUTHOR]

We report a flux crystal growth of Ba2[(UO2)2Ti2O8] and subsequent structural and spectroscopic studies using multiple techniques. The layered crystal structure, built up with sheets of edge‐sharing dimeric uranyl pentagonal bipyramids and dimeric TiO5 square pyramids with interlayer Ba(II) ions, was revealed by synchrotron single crystal x‐ray diffraction and confirmed with electron diffraction using a transmission electron microscope. The presence of only hexavalent uranium was confirmed by both diffuse reflectance and x‐ray absorption near‐edge structure spectroscopies, consistent with the bond valence sum calculations. Its vibrational modes were revealed by Raman spectroscopy. In addition, its implications as a potential hexavalent uranium waste form for the immobilization of uranium‐rich radioactive wastes were discussed. [ABSTRACT FROM AUTHOR]

Ln2Ti2O7 (Ln=Y and Gd) pyrochlore glass-ceramics have been fabricated successfully via internal crystallization. Subsequently, the phase evolution from Ln2Ti2O7 pyrochlores to Ln0.5U0.5Ti2O6 brannerites in glass with uranium (U) substitutions on the Ln-site of Ln2Ti2O7 has been investigated using X-ray diffraction, scanning electron microscope-electron dispersive spectroscopy, transmission electron microscopy, Raman and diffuse reflectance spectroscopy. Combined characterization by XRD, SEM- EDS and TEM SAED confirms the structures and phase evolution while Raman spectroscopy reveals characteristic vibration modes for both pyrochlore and brannerite. In addition, DRS of the U5+ ion has been used to probe the phase evolution, with the corresponding f- f transition band of 2 F7/2 energy level significantly shifting to longer wavenumbers due to the local coordination environment changing from eightfold coordination in pyrochlore to sixfold coordination in brannerite. [ABSTRACT FROM AUTHOR]

Pyrochlore-structured lanthanide stannate ceramic ( Ln2 Sn2 O7) has been synthesized via a new complex precipitation method. A suite of characterization techniques, including FTIR, Raman, X-ray, and electron diffraction as well as nitrogen sorption were employed to investigate the structural evolution of the synthesized and calcined powder. Raman, XRD, and selected area electron diffraction results confirm the presence of the pyrochlore structure after calcination of the powder above 1200°C. TEM imaging shows fine crystallites gradually increased in size from approximately 100 nm to about 500 nm with higher calcination temperatures. Grain growth and powder densification upon increasing the calcination temperature was confirmed by nitrogen sorption results. This aqueous synthetic method provides a simple pathway for the preparation of homogeneous lanthanide stannate ceramics. [ABSTRACT FROM AUTHOR]

Lanthanum zirconate has been prepared via a new chemical synthesis method by combining sol-gel processing and complex precipitation. The synthesis was carried out in aqueous solution under ambient conditions. The synthesized powder possessed the pyrochlore superstructure upon calcination above 1200°C. A suite of characterization techniques, including FTIR, Raman, X-ray and electron diffraction, TEM, SEM, and nitrogen sorption were employed to investigate the microstructural evolution and bulk properties. Dense ceramics (>90% relative density) were obtained after sintering at 1400°C, without need for additional processing (i.e., hot or cold isostatic pressing) or any milling steps. A mechanism has been proposed that elucidates molecular assembly of this chemical synthesis method. [ABSTRACT FROM AUTHOR]

Rutile powder was synthesized via sol-gel processing of Tyzor TE precursor in an aqueous solution at 40°C-50°C. A suite of characterization techniques, including FTIR, Raman, X-ray, and electron diffraction, were employed to investigate the microstructural evolution. The synthesized powder was phase-pure rutile possessing high surface area (144.7 m2/g), an average pore size of 24.9 nm, and pore volume of 0.66 cm3/g. A reaction mechanism is proposed for the preferential evolution of rutile over other titania polymorphs (i.e. amorphous or anatase). [ABSTRACT FROM AUTHOR]

The modification of titanium alkoxides by chemical reactions with ligands yields complexes or molecular clusters that are substantially different from those of the parent alkoxides. In this study, we investigate the structural evolution of powders and thin films prepared from two titanium oxo-alkoxyacylate clusters with different oxo-core structures [Ti6(μ3-O)2(μ2-O)2](CH3COO)8(μ2-OiPr)2(OiPr)6 and [Ti6(μ3-O)6](μ-RCOO)6(OiPr)6 ([6,4] and [6,6], respectively) as a function of annealing temperature. The structural evolution of powders and thin films prepared from the corresponding parent alkoxide Ti(OiPr)4 (TiP) were also investigated for comparison. In all powders, the amorphous-to-anatase transformation occurred upon heating to 400°C. In sharp contrast, the anatase-to-rutile transformation of the powder prepared from the [6,6] cluster was significantly inhibited compared with the conventionally derived powder, with no rutile being detected even after annealing at 800°C for 1 h. This was attributed to the small crystallite size in the [6,6]-derived powder, which is lower than the critical size previously reported for the anatase-to-rutile transformation in similar sol–gel-derived materials. In thin films, the amorphous-to-anatase phase transition also occurred at temperatures as low as 400°C for coatings deposited from conventional TiP precursor and [6,4] cluster solutions. However, in contrast to the corresponding powders no rutile nucleation occurred even at 800°C in either film. [ABSTRACT FROM AUTHOR]