Search

Dynamic acoustoelastic testing provides a more complete insight into the acoustic nonlinearity exhibited by micro-inhomogeneous media like granular and cracked materials. This method consists of measuring time of flight and energy modulations of pulsed ultrasonic waves induced by a low-frequency standing wave. Here pulsed ultrasonic head waves were employed to assess elastic and dissipative nonlinearities in a region near the surface of a solid. Synchronization of the ultrasound pulse sequence with the low-frequency excitation provided instantaneous variations in the elastic modulus and the attenuation as functions of the instantaneous low-frequency strain. Weak quadratic elastic nonlinearity and no dissipative nonlinearity were detected in duralumin. In limestone, distinction between tensile and compressive behaviors revealed an asymmetry in the acoustic nonlinearity and hysteresis in both the elastic modulus and the attenuation variations. Measured nonlinear acoustical parameters are in good agreement with values obtained by different techniques. Reversible acoustically induced conditioning modified the acoustic nonlinearity both quantitatively and qualitatively. It reduced tension-compression asymmetry, suggesting a nonequilibrium modification of the sources of acoustic nonlinearity. Additionally to the metrology of the acoustic nonlinearity, head wave based dynamic acoustoelastic testing may be a useful tool to monitor changes in the microstructure or the accumulation of damage in solids. [ABSTRACT FROM AUTHOR]

A new hybrid finite-difference (FD) and pseudospectral (PS) method adapted to the modeling of piezoelectric transducers (PZTs) is presented. The time-dependent equations of propagation are solved using the PS method while the electric field induced in the piezoelectric material is determined through a FD representation. The purpose of this combination is to keep the advantages of both methods in one model: the adaptability of FD representation to model piezoelectric elements with various geometries and materials, and the low number of nodes per wavelength required by the PS method. This approach is implemented to obtain an accurate algorithm to simulate the propagation of acoustic waves over large distances, directly coupled to the calculation of the electric field created inside the piezoelectric material, which is difficult with classical algorithms. These operations are computed using variables located on spatially and temporally staggered grids, which attenuate Gibbs phenomenon and increase the algorithm’s accuracy. The two-dimensional modeling of a PZT plate excited by a 50 MHz sinusoidal electrical signal is performed. The results are successfully compared to those obtained using the finite-element (FE) algorithm of ATILA™ software with configurations spatially and temporally adapted to the FE requirements. The cost efficiency of the FD-PS time-domain method is quantified and verified. [ABSTRACT FROM AUTHOR]

Dynamic acoustoelastic testing is applied to weakly pre-loaded unconsolidated water-saturated glass beads. The gravitational acceleration produces, on the probed beads, a static stress of order 130 Pa, thus the granular medium is close to the jamming transition. A low-frequency (LF) acoustic wave gently disturbs the medium, inducing successively slight expansion and compaction of the granular packing expected to modulate the number of contacts between beads. Ultrasound (US) pulses are emitted simultaneously to dynamically detect the induced modification of the granular skeleton. US propagation velocity and attenuation both increase when the LF pressure increases. The quadratic nonlinear elastic parameter β, related to the pressure dependence of US propagation velocity, was measured in the range 60-530 if water-saturated glass beads are considered as an effective medium. A dynamic modification of US scattering induced by beads is proposed to modulate US attenuation. Complex hysteretic behaviors and tension-compression asymmetry are also observed and analyzed by time-domain and spectral analyses. Furthermore acoustic nonlinearities are measured in cases of quasi-static and dynamic variations of the LF wave amplitude, providing quantitatively similar acoustic nonlinearities but qualitatively different.

Elastography applications require the use of efficient models to simulate the propagation of shear waves in soft media such as human tissues. These models are needed to improve understanding of the measured displacement field, to reconstruct the viscoelasticity of heterogeneous tissues, and to test inversion algorithms. This paper reports a numerical model based on a pseudospectral time domain method developed to simulate shear and compression wave propagation in an axisymmetric heterogeneous viscoelastic medium. This model was adapted to the study of soft tissues where the ratio between the compression and the shear wave velocity was about a thousand and validated in the homogeneous situation by comparison with an analytical model based on elastodynamic Green's functions. Displacements obtained experimentally using transient elastography are presented, compared with simulation results, and discussed.

One way to characterize metallic materials in the presence of defects like dislocation networks is to measure their large dynamic nonlinear elastic response. In this numerical study, a new method combining the nonlinear elastic wave spectroscopy (NEWS) method with a time reversal (TR) process is proposed. This method, called NEWS-TR, uses nonlinear analysis as a pretreatment of time reversal and then consists of retrofocusing only nonlinear components on the defect position. A two-dimensional pseudospectral time domain algorithm is developed here to validate the NEWS-TR method as a potential technique for damage location. Hysteretic nonlinear behavior of the materials being studied is introduced using the Preisach-Mayergoyz model. Moreover, in order to extend this solver in two dimensions, the Kelvin notation is used to modify the elastic coefficient tensor. Simulations performed on a metallic sample show the feasibility and value of the NEWS-TR methodology for microdamage imaging. Retrofocusing quality depends on different parameters such as the filtering method used to keep only nonlinear components and the nonlinear effect measured. In harmonic generation, pulse inversion filtering seems to be a more appropriate filtering method than classical harmonic filtering for most defect positions, mainly because of its ability to filter all fundamental components.

One of the stress sources that can be used in dynamic elastography imaging methods is the acoustic radiation force. However, displacements of the medium induced by this stress field are generally not fully understood in terms of spatial distribution and temporal evolution. A model has been developed based on the elastodynamic Green's function describing the different acoustic waves generated by focused ultrasound. The function is composed of three terms: two far-field terms, which correspond to a purely longitudinal compression wave and a purely transverse shear wave, and a coupling near-field term which has a longitudinal component and a transverse component. For propagation distances in the shear wavelength range, the predominant term is the near field term. The displacement duration corresponds to the propagation duration of the shear wave between the farthest source point and the observation point. This time therefore depends on the source size and the local shear modulus of the tissue. Evolution of the displacement/time curve profile, which is directly linked to spatial and temporal source profiles, is computed at different radial distances, for different durations of force applications and different shear elastic coefficients. Experimental results performed with an optical interferometric method in a homogeneous tissue-mimicking phantom agreed with the theoretical profiles.