Search

Both electronic as well as magnetic characteristics of Co1-xFexMnSb (x = 0, 0.25, 0.50, 0.75, 1) composite have been studied by employing the first principle (FP) study. The FP calculation was attained using the density functional theory (DFT). The exchange–correlation term has been examined inside the generalized gradient approximation (GGA), as implemented in the Wien2k code. According to predictions, the type 3 structure of atoms will be the tremendous, optimum, and have the smallest amount of energy. The formation energy of CoMnSb and FeMnSb was minimum so it demonstrates that these alloys are optimized. CoMnSb and FeMnSb are half-metallic (HM) having the value of magnetic moment 3µB and 2µB, respectively in good agreement with the Slater-Pauling rule. These results suggest that the Mn atoms are the primary source of the magnetic moment. The values of elastic constants were determined by the crystal structure's symmetry. Additionally, the bulk modulus B, shear modulus G, Young's modulus E, as well as Poisson's ratio v have been determined using the Voigt-Reuss-Hill (VRH) method. Both examined compounds, CoMnSb and FeMnSb, have computed B/G ratios higher as compared to 1.75, indicating that these alloys are malleable. [ABSTRACT FROM AUTHOR]

The structural, half-metallic, and elastic characteristics of XZrAs (X = Cr, Mn, and V) half-Heusler compounds were theoretically calculated using the WIEN2k code. For the term of the potential exchange and correlation (XC), we calculated structural, electronic, and magnetic properties using the generalized gradient approximation (GGA). The type 1 arrangement in ferromagnetic (FM) phases is more energetically stable than other type arrangements in all compounds. The spin-up electrons of both XZrAs (X = Cr, Mn) half-Heusler compounds in the type III structure are semiconducting with energy gaps, whereas the spin-dn electrons are metallic. Research has also been done on the VZrAs compound, which exhibits metallic characteristics in both type I and type III structures. XZrAs (X = Cr, Mn, and V) half-Heusler compounds are elastically stable and ductile, according to calculated Cij elastic constants. Finally, at equilibrium lattice constants a = 6.1196 A° for MnZrAs and 6.142 A° for CrZrAs, real half-metal ferromagnetic materials (HMF) were produced from XZrAs (X = Cr, Mn) half-Heusler compounds within 3 µB and 2µB, respectively. [ABSTRACT FROM AUTHOR]

The first-principle calculations of density functional theory were used to study the structural, electronic, magnetic, mechanic, and half-metallic behavior of Y2MnZ (Z = Al, Ga, In) within the spin generalized gradient approximation. These compounds can be experimentally synthesized due to their negative values of the calculated formation energies. Our calculations indicate that they are more stable in Cu2MnAl-type structure. The Hg2CuTi-type structure displays half-metallic characteristic with 100% spin polarization at the Fermi level. The value of calculated magnetic moment has an integer value of 2μB for Y2MnZ (Z = Al, Ga, In) in the Hg2CuTi-type structure which well matches with magnetic moments predicted from Slater–Pauling rule. Therefore, the Y2MnZ (Z = Al, Ga, In) in the Hg2CuTi-type structure is predicted to be a candidate for possible spintronics applications. [ABSTRACT FROM AUTHOR]

The structural, electronic, and magnetic properties of the half-Heusler MTiSb (M = Fe, Co, Ni) compounds have been examined using the first-principles calculations with the full-potential linear augmented plane wave (FP-LAPW) method within the density functional theory. The electronic structures and magnetic properties of MTiSb (M = Fe, Co, Ni) are studied. It is found that the calculated lattice parameter is in good agreement with the theoretical values. Using the general gradient approximation (GGA), we observe that for the three compounds, the α phase is more stable than β and γ phases. CoTiSb is a semiconductor, NiTiSb is a metal, while the FeTiSb compound is a half-metallic, and the total magnetic moments are 0.00085, − 0.26074, and 0.99353 μ B, respectively, which is in agreement with the Slater-Pauling rule, Furthermore, the origin for the appearance of the half-metallic band gap in the FeTiSb compound was also discussed. [ABSTRACT FROM AUTHOR]

First-principles density functional theory (DFT) calculations with the generalized gradient approximation (GGA) have been performed to investigate electronic band structures and magnetic and half-metallic characteristic of TiCoAlSn ( x = 0, 0.25, 0.50, 0.75, 1). The optimized equilibrium lattice constants were found to be equal to 6.08 and 6.37 Å for TiCoAl and TiCoSn, respectively. These ternary Heusler compounds are found to be a complete half-metal with a total magnetic moment of 2 and 3 μ , respectively, which is in good compliance with the Slater-Pauling rule, M = Z − 18. The spin-polarized band structures and density of states (DOS) of the TiCoAlSn (0.25, 0.50, and 0.75) Heusler alloys confirm that they are half-metal due to the presence of the energy gap in the minority spin. Consequently, TiCoAlSn ( x = 0, 0.25, 0.50, 0.75, 1) alloys are predicted to be a promising candidate for the practical applications in spintronic devices. [ABSTRACT FROM AUTHOR]

The structural, electronic, and magnetic properties of the full-Heusler compounds CoMnZ ( Z = Al, Ge, Si, Ga) have been investigated using the first-principles calculations with the full-potential linear-augmented plane wave method within the density functional theory. The electronic structures and magnetic properties of the CoMnZ ( Z = Al, Ge, Si, Ga) compounds with both HgCuTi- and CuMnAl-type structures are studied. It is found that the calculated lattice constants are in good agreement with the theoretical values. Using the general gradient approximation, we observe that the CuMnAl-type structure is more stable than the HgCuTi type. The CoMnZ ( Z = Al, Ge, Si, Ga) compounds were half-metallic ferromagnets in the CuMnAl-type structure. The total magnetic moments of the CoMnZ ( Z = Al, Ge, Si, Ga) compounds in the CuMnAl-type structure were 4, 5, 5, and 4 μ respectively, which is in agreement with the Slater-Pauling rule, m = N−24 Furthermore, the origin for the appearance of the half-metallic band gap in the CoMnZ compound was also discussed which shows them to be promising materials for possible spintronics applications. [ABSTRACT FROM AUTHOR]

Using the first-principles calculations based on density functional theory within the generalized gradient approximation (GGA), we investigate the structural, electronic and magnetic properties of the TiZAl (Z = Co, Fe, Mn) alloys with the CuHgTi-type structure. The optimized equilibrium lattice constants were found to be 6.08 Å for TiCoAl, 6.07 Å for TiFeAl and 6.16 Å for TiMnAl. The TiZAl (Z = Co, Fe, Mn) alloys are found to be half-metallic ferromagnets. The total magnetic moment of TiZAl (Z = Co, Fe, Mn) is 2, 1 and 0 µ, respectively, which is in agreement with the Slater-Pauling rule M= Z- 18. The TiZAl (Z = Co, Fe, Mn) have a band gap of 0.64745, 0.57795 and 0.39327 eV, respectively. [ABSTRACT FROM AUTHOR]

Using the full-potential linearized augmented plane-wave method of first-principles calculations of density functional theory, we have performed a systematic investigations on the structural, electronic, and magnetic properties related to the spintronic applications for gallium phosphide GaP doped with 3 d transition metal (TM) atoms such as vanadium (V), chromium (Cr), and manganese (Mn) as ternary GaGa TMP diluted magnetic semiconductors (DMSs) in zinc-blende phase at concentrations x = 0.0625, 0.125, and 0.25. The analysis of electronic and magnetic properties with various concentrations ( x) of TM revealed that GaGa VP at ( x = 0.0625, 0.125, and 0.25) and Ga TMP (TM = Cr and Mn) at ( x = 0.0625 and 0.125) are half-metallic ferromagnets (HMF) with spin polarization of 100 %. The HMF character destroyed for GaGaCrP and GaGaMnP at higher concentration x = 0.25 of Cr and Mn. The half-metallic gap increases with decreasing in concentration of impurity, and therefore, the GaGa TMP, GaGaCrP, and GaGaMnP DMSs at low concentrations appear to be better candidates for spintronic applications. [ABSTRACT FROM AUTHOR]

In this paper, ab initio electronic structure calculations are applied to study half-metallic properties of Heusler alloys XMnGe (X = Sc, Fe, Ni) with both CuHgTi-type and AlCuMn-type structures using first-principles calculations based on density functional theory (DFT). The exchange-correlation energy of electrons is described in the generalized gradient approximation (GGA). The results showed that for all compounds XMnGe, the AlCuMn-type structure is energetically more stable than CuHgTi-type structure at the equilibrium volume. The ScMnGe and FeMnGe are half-metallic in the CuHgTi- and AlCuMn-type structures, respectively; finally, NiMnGe have a metallic character in both CuHgTi- and AlCuMn-type structures. [ABSTRACT FROM AUTHOR]

We investigate the structural, electronic, and magnetic properties of zinc-blende diluted magnetic semiconductors (DMS) Al TMN for transition metals (TM) = V, Cr, Mn, and Fe at x = 0.125 and 0.25, using first-principle calculations with the full-potential linearized augmented plane wave (FP-LAPW) method within the density functional theory and local spin-density approximation, in an aim to predict properties of Al TMN compounds. We have analysed the reliance of structural parameter values on the composition x in the range of x= 0.125−0.25. Results of calculated electronic structures reveal that Al TMN have stable ferromagnetic ground state and they are ideal half-metallic (HM) ferromagnetic at their equilibrium lattice constants. We have also studied the magnetic moment of Al TMN by increasing the concentration of TM atom; this is the most important source of the total magnetic moment in these alloys, while the contributions from Al, N, and interstitial moments are minor. [ABSTRACT FROM AUTHOR]

First-principle calculations within the framework of density functional theory are employed to study the structural, electronic, and half-metallic ferromagnetic properties of In (TM)P (TM = Cr, Mn) at concentrations (x = 0.0625, 0.125, 0.25)of transition metal in zinc blende phase. The investigations of electronic and magnetic properties indicate that InTMP (TM = Cr, Mn) at x = 0.0625, 0.125, and 0.25 are half-metallic ferromagnets with 100 % magnetic spin polarization. On the one hand, the total magnetization is an integer Bohr magneton of 3 μ and 4 μ for InCrP and InMnP, respectively, which confirms the half-metallic feature of InTMP compounds. On the other hand, the densities of states of majority-spin states show that the large hybridization between 3p (P) and 3d (TM) partially filled states dominates the gap, which stabilizes the ferromagnetic state configuration associated with double-exchange mechanism. The band structures depict that half-metallic gap at x = 0.0625 is 0.404 eV for InCrP which is higher than 0.125 eV for InMnP. Therefore, the largest half-metallic gap in InCrP at low concentration x = 0.0625 reveals that Cr-doped InP seem to be a more potential candidate than that Mn-doped InP for spin injection applications in the field of spintronic devices. [ABSTRACT FROM AUTHOR]

We have investigated the electronic structure and half-metallic ferromagnetism in zinc blende phase of BeVM (M=S, Se, Te) at concentration x=0.125 by employing a first-principles calculations within the framework of density functional theory (DFT) based on the linearized augmented plane wave method (FP-LAPW), as implanted in the WIEN2k code with generalized gradient approximation functional proposed by Wu and Cohen (WC-GGA). The electronic properties exhibit half-metallic behavior. So the density of states shows the hybridization between the p (S, Se, Te) and 3d (V) states that creates the antibonding states in the gap, which stabilizes the ferromagnetic ground state associated with the double-exchange mechanism, whereas the spin polarized band structures depict half-metallic gap that increases from BeVS to BeVSe to BeVTe. These compounds are robust half-metallic ferromagnets with spin polarization of 100 % and predicted to be potential candidates for spin injection applications in spintronic devices. Therefore, our predictions require an experimental confirmation in the future. [ABSTRACT FROM AUTHOR]

In this paper, we present a theoretical study of structural, electronic and magnetic properties for zinc-blende GaTMN(TM = Cr, Fe, Mn, V) using the full-potential augmented plane wave (FP-APW) method with local-spin density approximation (LSDA). We have analysed the dependence of structural parameters values on the composition x in the range of x=0.25, x=0.50. Also, the role of p-d hybridisation is analysed by partial (PDOS) and total density of states (TDOS). The magnetic moment of GaTMN has been studied by increasing the concentration of TM atom. The TM atom is the most important source of the total magnetic moment in these alloys, while the contributions from Ga and N are minor. In addition our results verify the half-metallic ferromagnetic character of TM doped GaN. [ABSTRACT FROM AUTHOR]

We investigate the structural, electronic, and magnetic properties of (M = Fe, Mn)-based zinc blende diluted magnetic semiconductors (DMS) (Al, Ga, In)MN for ( x=0.0625,0.125,0.25), using first-principles calculations with the full-potential linearized augmented plane waves (FP-LAPW) method within the density functional theory and local spin-density approximation. The analysis of electronic structures and magnetic properties show that (Al, Ga, In)FeN at ( x=0.0625,0.125,0.25) are magnetic insulators, and InMnN at ( x=0.0625,0.125) are metallic in nature. On the other hand the (Al, Ga)MnN at ( x=0.0625,0.125,0.25) and InMnN are half-metallic ferromagnets with magnetic spin polarization of 100 %, where the ferromagnetic ground states result from a double-exchange mechanism, and these compounds are predicted to be good candidates for spintronic applications. [ABSTRACT FROM AUTHOR]