Search

Compared to traditional traffic signal control methods, the method driven by Deep Reinforcement Learning (DRL) has shown better performance. But the problem of low sample utilization in reinforcement learning also arises. To deal with the problem, this paper presents a novel Twin Delayed Deep Deterministic Policy Gradient with Dual Buffer (TD3_DB) for traffic signal control. In the proposed framework, two experience buffers are used to store important samples and normal samples, separately, and the proportion of the two buffers is adjusted adaptively. In addition, lane pressure, describing the dynamic feature of lane traffic flow, is used for the state design of the TD3 agent, which enhances the perception of the agent toward intersections. Comprehensive experiments on different traffic flow modes has shown, the dual experience replay scheme can improve the sample utilization, and the proposed TD3_DB performs better than other methods such as original TD3, Proximal Policy Optimization (PPO), etc., effectively reducing vehicle queue length and waiting time. [ABSTRACT FROM AUTHOR]

A distributed firewall is a security application that monitors and controls traffic on an organization's network. While centralized firewalls are used against attacks coming from outside a network, distributed firewalls are considered for inside attacks from internal networks such as wireless access and VPN tunnel. Distributed firewalls use policies, which are stated by rules, to find anomalous packets. However, such static rules may be incomplete. In this case, by monitoring firewall logs, the anomalies can be detected. Such logs become big when networks have high traffic, but their hidden knowledge contains valuable information about existing anomalies. In this paper, to detect the anomalies, we extract patterns from big data logs of distributed firewalls using data mining and machine learning. The proposed method is applied to big logs from distributed firewalls in a real security environment, and results are analyzed. [ABSTRACT FROM AUTHOR]

Rapid increase in the private and public vehicles fleet causes urban centers heavily populated with limited transport road infrastructure. To overcome this, in real-time scenarios, queue length-based traffic light controllers are being designed utilizing light-weighted S-Edge devices. This system suffers from starvation problems if a road lane at the intersection continuously receives vehicles during peak hours. With this, higher green phase duration can be allocated to the same-lane multiple times despite vehicles on the other lanes' longer waiting time. To tackle this problem, an efficient and smart edge computing (S-Edge)-driven traffic light controller is proposed by accounting the real-time heterogeneous vehicular dynamics at the fog computing node. The fog node executes the proposed fuzzy inference system to generate phase-cycle duration. Further, to allocate the phase duration effectively, a method for estimating the lane pressure is proposed for the edge controller utilizing average queue length and waiting time. S-Edge is a light-weighted actuated traffic light controller that generates traffic light control cycle duration and phase (red/yellow/green) duration. To validate the S-Edge controller, a prototype is developed on an Indian city OpenStreetMap utilizing the low-computing power IoT devices, i.e., Raspberry Pi, and a well-known open-source simulator, i.e., Simulation of Urban MObility. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) refer to a group of battery-operated tiny sensor nodes having vast application areas in daily use. These are spatially dispersed and dedicated wireless sensor nodes for observing and recording the different parameter and physical conditions of the surroundings. There is a recent advancement in the field of network connectivity and computations in WSNs. The key functions of WSNs are a data extraction and to transmit the extracted data to the server placed at an isolated location. Various types of WSNs like underground underwater, terrestrial, and multimedia networks get applications domains such as in industrial automation, traffic monitoring and control medical device monitoring, and many other areas. Despite the thriving market, there are several challenges like energy efficiency, limited storage and computation, low bandwidth, high error rates, scalability, and survivability in harsh environment; hence, network lifespan expanding is a critical demanding issues. So many researchers have earlier focused towards finding the optimal path in between member node and sink node, so that energy depletion can be reduced to improve the network lifespan. There are different challenges in WSNs but one of the most challenging issues is how to minimize the energy consumption; numerous bio-inspired techniques have been proposed previously to obtain an optimal path between the member node and the sink node. In this manuscript, we are presenting a comprehensive survey on optimization technique-based routing and clustering. The study of this comprehensive survey offers in-depth summary of the past researches in the area of WSNs. [ABSTRACT FROM AUTHOR]

Traffic lights are an important controlling factor in traffic flows, and good policies will facilitate traffic congestion. A car's waiting time is highly related to the period in which the traffic lights are green or red; thus, a proper controlling policy reduces the waiting time and speeds up the car movement. Emergency vehicles always have a higher priority than other cars and need to reach their destination faster. In the last decade, a lot of research has been done to solve the traffic light scheduling issue using artificial intelligence techniques. Reinforcement learning with simulating human learning has the outstanding performance to solve complex problems, such as traffic lights control. In this study, a deep reinforcement learning traffic light control was implemented at a crossroad using real-time traffic information with an emphasis on emergency vehicles. The agent learns to adjust its policies to prioritize the emergency cars over the other cars. The results show less waiting time and speed up the cars' movement. It also indicates the emergency vehicles will cross the intersection with the least delay. With 200 to 600 cars and one emergency vehicle, the average delay decreases 2–16% in total using reinforcement learning. Considering more emergency vehicles, there is a 27–40% decrease in average delay for emergency vehicles. [ABSTRACT FROM AUTHOR]

As the global economy develops rapidly, traffic congestion has become a major problem for first-tier cities in various countries. In order to address the problem of failed real-time control of the traffic flow data by the traditional traffic light control as well as malicious attack and other security problems faced by the intelligent traffic light (ITL) control system, a multi-agent distributed ITL control method was proposed based on the fog computing platform and the Q learning algorithm used for the reinforcement learning in this study, and the simulation comparison was conducted by using the simulation platform jointly constructed based on the VISSIM-Excel VBA-MATLAB software. Subsequently, on the basis of puzzle difficulty of the computational Diffie–Helleman (CDH) and Hash Collision, the applicable security control scheme of ITL under the fog computing was proposed. The results reveal that the proposed intelligent control system prolongs the time of green light properly when the number of vehicles increases, thereby reducing the delay time and retention rate of vehicles; the security control scheme of ITL based on the puzzle of CDH is less efficient when the vehicle density increases, while that based on the puzzle of Hash collision is very friendly to the fog equipment. In conclusion, the proposed control method of ITL based on the fog computing and Q learning algorithm can alleviate the traffic congestion effectively, so the proposed method has high security. [ABSTRACT FROM AUTHOR]

In recent years, due to the drastic rise in the number of vehicles and the lack of sufficient infrastructure, traffic jams, air pollution, and fuel consumption have increased in cities. The optimization of timing for traffic lights is one of the solutions for the mentioned problems. Many methods have been introduced to deal with these problems, including reinforcement learning. Although a great number of learning-based methods have been used in traffic signal control, they suffer from poor performance and slow learning convergence. In this paper, a transfer learning-based method for traffic signal control has been proposed. Multi-agent system has also been used for modelling the traffic network and transfer learning has been used to make reinforcement learning agents transfer their experience to each other. Furthermore, a classifier has been utilized to classify the transferred experiences. The results show that using the proposed method leads to a significant improvement on average delay time and convergence time of the learning process. [ABSTRACT FROM AUTHOR]

In view of the disturbance of the emergency signal preemption to the normal traffic flow, a scientific and reasonable signal transition optimization model was proposed in this paper, in which fair and efficiency are both considered. Since the emergency signal preemption may lead to longer vehicle queuing and greater vehicle delay at intersections, the difference of queue length and the vehicle delay were selected as the objectives taking into account the fair benefit, and a multi-objective signal recovery transition optimization model for emergency rescue was established based on the power function method. The queue length was calculated by the 95% queue length model of the SYNCHRO, and the average vehicle delay was calculated with HCM2000 delay model; furthermore, parameters’ weight in the model was calibrated with the variation coefficient method, and model was solved by genetic algorithm. Moreover, power function method was used to score the signal recovery transition schemes of emergency traffic. Finally, based on the survey data from the typical route network in the Lion Mountain area of Suzhou City, the model proposed in this study was compared with three classical smooth transition schemes (immediate transition scheme, two-cycle transition scheme and three-cycle transition scheme) at the scenario of evening peak. Simulation results showed that the model in this paper can reduce the vehicle delay and queue length compared with the above three smooth transition schemes; the average reduction ratio of queue length delay was 13.82%, and this number of queue length was 13.65%, from which we can conclude that the model proposed in this has better performance than other three classical transition schemes in emergency signal transition applicability. [ABSTRACT FROM AUTHOR]

As vehicular networking has recently been developed and commercialized, vehicular cloud computing has received much attention in various research areas, such as intelligent transportation systems and vehicular ad hoc networks. An efficient intersection traffic control using vehicular cloud computing is one of the key research topics in intelligent transportation systems. To efficiently deal with intersection traffic control via vehicle-to-vehicle communications, we design a distributed mutual exclusion algorithm that does not rely on broadcast, which introduces communication overheads; instead, our algorithm use point-to-point messages sent between the vehicles to keep network traffic load lower. In our algorithmic design, to pass an intersection, the lead vehicle on a lane must get permissions from a subset of other vehicles and its following vehicles on the same lane can follow the lead vehicle without permissions unlike the previous research. To evaluate the performance of our distributed mutual exclusion algorithm, we conduct extensive experiments. The results show that our algorithmic design is both effective and efficient. [ABSTRACT FROM AUTHOR]

Abstract Information about vehicles on the road is very important for the maintenance of traffic control in current complex traffic condition. Images of vehicles are captured by vehicle-directed cameras. This paper proposes a new vehicle tracking mechanism using license plate recognition technology, which is essential to having information about vehicles on the roads. The proposed method is a real-time processing system using multistep image processing, as well as recognition and tracking processes from 2D and 3D images. The experimental results of real environmental images in recognition and tracking using the proposed method are shown. [ABSTRACT FROM AUTHOR]

Internet attacks such as distributed denial-of-service (DDoS) attacks and worm attacks are increasing in severity. Identifying realtime attack detection and mitigation of Internet traffic is an important and challenging problem. For example, a compromised host doing fast scanning for worm propagation often makes an unusually high number of connections to distinct destinations within a short time. We call such a host a superpoint, which are sources that connect to a large number of distinct destinations. Detecting superpoints is very important in developing effective and efficient traffic engineering schemes. We propose two novel schemes for detecting superpoints and prove guarantees on their accuracy and memory requirements. These schemes are implemented by introducing a reversible counting Bloom filter (RCBF), a special counting Bloom filter. The RCBF consists of 4 hash functions which projectively select some consecutive bits from original strings as function values. We obtain the information of superpoints using the overlapping of hash bit strings of the RCBF. The theoretical analysis and experiment results show that our schemes can precisely and efficiently detect superpoints. [ABSTRACT FROM AUTHOR]