Search

The lateral strength and stiffness requirements due to wind loads usually govern the design of tall buildings. The current building codes in the US, Canada, and Europe recognize the first s...

Part I of the two companion papers postulated and proved the capability of self-centering systems in controlling the wind-induced damage accumulations due to long-duration along-wind loads....

Light-timber frames, using plywood (PW), exhibit a pinched hysteresis response, and their energy absorption capacity is limited. The energy-dissipation capacity can be enhanced using energy...

In this work, a 10-story uncoupled (10S-U) hybrid seismic force resisting system, consisting of cross-laminated timber (CLT) walls and reinforced concrete (RC) beams, is considered. Require...

A cross-laminated timber (CLT) wall is a composite structural assembly with high strength and stiffness properties. In this study, the beneficial properties of this wall were used in design...

In this paper, to supplement the Canadian building code for a timber-steel hybrid structure, over-strength, and ductility-related force modification factors are developed and validated using a collapse risk assessment approach. The hybrid structure incorporates cross-laminated timber (CLT) infill walls within steel moment resisting frames. Following the FEMA P695 procedure, archetype buildings of 3-story, 6-story, and 9-story height with middle bay infilled with CLT were developed. Subsequently, a nonlinear static pushover analysis was performed to quantify the actual over-strength factors of the hybrid archetype buildings. To check the FEMA P695 acceptable collapse probabilities and adjusted collapse margin ratios (ACMRs), incremental dynamic analysis was carried out using 60 ground motion records that were selected to regional seismic hazard characteristics in southwestern British Columbia, Canada. Considering the total system uncertainty, comparison of the calculated ACMRs with the FEMA P695 requirement indicates the acceptability of the proposed over-strength and ductility factors.

The law to promote the use of wood in the construction industry was announced by the Japanese government in 2010. As a result of this initiative, timber and timber-based hybrid buildings are increasingly used in public buildings. As the buildings are located in high seismic zone areas, however, validation of the current design guideline was of paramount importance. This paper reports the design and a shake table test of timber frame–reinforced concrete (RC) core hybrid systems. Three specimens (S1, S2, and S3) are tested: S1 and S2 are both one-story buildings with a nailed plywood floor (flexible diaphragm) and a rigid RC floor (rigid diaphragm), respectively. S3 is a two-story building with a nailed plywood floor. Each specimen is tested with increasing magnitude of earthquake loading. The shake table test results showed that the adopted design guideline is sufficient. At higher seismic loads, however, the prevalent plan irregularity induced higher torsional demand damage at the RC core and timb...

In the direct displacement-based design method, energy dissipative capacity of structures can be represented by an equivalent viscous damping (EVD). A number of studies have been reported in the formulation of EVD for different structural systems and hysteretic models. In this paper, an EVD model is developed and calibrated for steel-timber hybrid structures, where cross-laminated timber (CLT) shear panels are used as an infill in steel moment-resisting frames (SMRFs). To develop the EVD model, 243 single-story, single-bay CLT-infilled SMRFs analytical models are subject to semi-static cyclic analysis. Different model parameters of the hybrid structure are varied: gap between CLT panel and steel frame, bracket (connection) spacing, CLT panel thickness and strength, and postyield stiffness ratio of steel members. The EVD of each model was computed from the hysteretic responses based on an area-based approach. The design of computer experiments and response surface methodology were utilized to formu...