Search

The adsorption behaviour of three commonly used drugs, namely ketoprofen, hydrochlorothiazide and atenolol, from diluted aqueous solutions on beta zeolites with different SiO2/Al2O3 ratio (i.e. 25, 38 and 360) was investigated by changing the ionic strength and the pH, before and after thermal treatment of the adsorbents. The selective adsorption of drugs was confirmed by thermogravimetry and X-ray diffraction. The adsorption capacity of beta zeolites was strongly dependent on both the solution pH and the alumina content of the adsorbent. Such a remarkable difference was interpreted as a function of the interactions between drug molecules and zeolite surface functional groups. Atenolol was readily adsorbed on the less hydrophobic zeolite, under pH conditions in which electrostatic interactions were predominant. On the other hand, ketoprofen adsorption was mainly driven by hydrophobic interactions. For undissociated molecules the adsorption capability increased with the increase of hydrophobicity.

This paper discusses the development of a comprehensive method for the simultaneous analysis of personal care products (PCPs) based on SPE and GC-MS. The method was developed on 29 target compounds to represent PCPs belonging to different chemical classes: surfactants in detergents (alkyl benzenes), fragrances in cosmetics (nitro and polycyclic musks), antioxidants and preservatives (phenols), plasticizers (phthalates) displaying a wide range of volatility, polarity, water solubility. In addition to the conventional C(18) stationary phase, a surface modified styrene divinylbenzene polymeric phase (Strata X SPE cartridge) has been investigated as suitable for the simultaneous extraction of several PCPs with polar and non-polar characteristics. For both sorbents different solvent compositions and eluting conditions were tested and compared in order to achieve high extraction efficiency for as many sample components as possible. Comparison of the behavior of the two cartridges reveals that, overall, Strata-X provides better efficiency with extraction recovery higher than 70% for most of the PCPs investigated. The best results were obtained under the following operative conditions: an evaporation temperature of 40 degrees C, elution on Strata-X cartridge using a volume of 15 mL of ethyl acetate (EA) as solvent and operating with slow flow rate (-10 KPa). In addition to the conventional method based on peak integration, a chemometric approach based on the computation of the experimental autocovariance function (EACVF(tot)) was applied to the complex GC-MS signal: the percentage recovery and information on peak abundance distribution can be evaluated for each procedure step. The PC-based signal processing proved very helpful in assisting the development of the analytical procedure, since it saves labor and time and increases result reliability in handling GC complex signals.

International audience; In gas chromatographic isothermal separations of multicomponent mixtures, i.e., mixtures where the number of components is high and unknown, the efficiency is low and not enough to allow a complete separation with a consequent severe peak overlapping in the chromatogram. The consequence is a significant loss in analytical information content. Therefore it is practically mandatory to use a chemometric procedure to decode the complex chromatogram, i. e. to deconvolve the overlapping signal to extract from it information on the mixture and the separation system. Isothermal separations are not very popular, due to their low efficiency, but they are very common in in situ analyses during space missions, as a consequence of flight constraints on instrumentation complexity and power (energy saving). In this work a chemometric approach based on Fourier analysis is applied to chromatograms obtained under isothermal or low temperature programming conditions. These conditions simulate those employed in space missions. The procedure has been applied to standard mixtures containing compounds representative of the planetary atmospheres that will be investigated in the near future: in particular, those related to Titan's atmosphere (Cassini-Huygens mission) and a cometary nucleus (Rosetta mission), i. e., hydrocarbons and oxygenated compounds with carbon atom numbers ranging from 2 to 8. The original approach, developed for constant peak width, is extended to variable peak width, in particular to the case of peak width linearly increasing with retention time, representing isothermal separations. The proposed approach is able to characterise complex isothermal chromatograms in terms of number of components present in the mixture and of separation efficiency: such results are useful in interpreting data recovered from space missions and for optimising analysis conditions compatible with flight constraints.

A new procedure for calibrating ThFFF systems by using broad molecular weight standards based on a non-linear least squares fitting of the fractogram to the Molecular Weight Distribution to derive the system calibration parameters is presented and explored by simulation. This procedure proved robust with respect to noise and it is able to account for detector nonlinearity. The effect of band broadening was evaluated and it was found that significant bias is observed only for polydispersities lower than 1.3. The method was experimentally validated by using polystyrene in decalin and was then applied to polypropylene under conditions of high temperature ThFFF (Tc = 394 K). It appears that the presented method can be useful in characterising polyolefins polymers for which monodisperse standards are not available.

The adsorption behaviour of three commonly used drugs, namely ketoprofen, hydrochlorothiazide and atenolol, from diluted aqueous solutions on beta zeolites with different SiO2/Al2O3 ratio (i.e. 25, 38 and 360) was investigated by changing the ionic strength and the pH, before and after thermal treatment of the adsorbents. The selective adsorption of drugs was confirmed by thermogravimetry and X-ray diffraction. The adsorption capacity of beta zeolites was strongly dependent on both the solution pH and the alumina content of the adsorbent. Such a remarkable difference was interpreted as a function of the interactions between drug molecules and zeolite surface functional groups. Atenolol was readily adsorbed on the less hydrophobic zeolite, under pH conditions in which electrostatic interactions were predominant. On the other hand, ketoprofen adsorption was mainly driven by hydrophobic interactions. For undissociated molecules the adsorption capability increased with the increase of hydrophobicity.

The purpose of this review is to illustrate the most important techniques for isotherm determination by means of HPLC. Starting on the traditional Frontal Analysis approach, Frontal Analysis by Characteristic Point, Elution by Characteristic Point, Perturbation Method in its different applications will be considered to conclude with the most recent Inverse Method approach. Since many of these techniques are based on the fundamentals of nonlinear chromatography, a short overview of the theory of nonlinear chromatography is presented. Emphasis is given to the most recent applications of these techniques for pharmaceutical applications, characterization of binding mechanisms, bioaffinity studies, molecular and chiral recognition processes.