Search

Since the low cost and high flexibility, wireless automatic meter reading network (WAMRN) is widely used by utility companies to realize automatic collection and transmission of remote energy consumption information. Considering that WAMRN is composed of several wireless communication nodes, the lifetime of the network will be affected by factors such as the changeable deployment environment and the limited energy of nodes. Thus, a novel niche quantum ant colony-based WAMRN clustering optimization method is proposed in this paper to address the problem of how to make full use of the limited energy to extend network lifetime and improve data transmission efficiency. In the proposed approach, a clustering model of WAMRN is defined; moreover, an improved Niche Quantum Ant Colony Optimization (NQACO) is proposed to optimize the model therefore to obtain an optimal clustering scheme, which can help WAMRN reduce unnecessary energy loss to achieve the purpose of extending the lifetime of the entire network. To verify the performance of the proposed method, NQACO is compared with some popular clustering methods, i.e., GA and SA, under different scenarios. The results show that under the premise of ensuring network communication, NQACO is superior to the other two methods in reducing the total energy consumption and prolonging the network lifetime. [ABSTRACT FROM AUTHOR]

For the severe impact of limited energy and network attacks caused by open transmission channels on data transmission, this paper presents a low-power and secure multihop routing mechanism based on the Markov state transition theory. The random selection of transmission paths enables the network to resist typical attacks such as interference and interception, thus ensuring the security of data transmission. Meanwhile, the proposed algorithm can reduce the overall energy consumption of the network and balance the load according to the residual energy of each path. Simulation results prove that the routing mechanism proposed in this paper can improve the energy efficiency and the security of the wireless ad hoc network. [ABSTRACT FROM AUTHOR]

Smart home is a building, network, communication, automation, set management, and service, as one of the efficient, comfortable, safe, and environmental protection of the living environment, and can provide personalized living space according to the needs of different users. Due to the advantages of wireless sensor network (WSN), such as strong expansion ability, strong communication ability, and strong self-organization ability, the smart home system based on WSN has become the main development direction in the field of smart home. This paper analyzes the different functions and features of wireless sensor network routing protocol and use scope, aiming at the application layer, using the MQ queue enhance server concurrent processing capacity and system scalability and design based on application layer gateway and terminal node "data matching list," which are introduced in the design of smart home system based on geographic information location energy-efficient routing protocols. The solution of routing void problem is improved by using information feedback mechanism and alternate nodes. Simulation results show that this method can improve the energy saving of energy-efficient routing protocol. Finally, the intelligent home system experiment platform was built to verify the overall function of the system, and the communication function of the WiFi network and ZigBee network was tested. Based on the analysis of the interference between ZigBee and WiFi network, frequency agility algorithm is used to solve the problem of the same frequency interference, so as to ensure the performance of the system to meet the needs of the smart home system. [ABSTRACT FROM AUTHOR]

Wireless communication systems have evolved and offered more smart and advanced systems like ad hoc and sensor-based infrastructure fewer networks. These networks are evaluated with two fundamental parameters including data rate and spectral efficiency. To achieve a high data rate and robust wireless communication, the most significant task is channel equalization at the receiver side. The transmitted data symbols when passing through the wireless channel suffer from various types of impairments, such as fading, Doppler shifts, and Intersymbol Interference (ISI), and degraded the overall network performance. To mitigate channel-related impairments, many channel equalization algorithms have been proposed for communication systems. The channel equalization problem can also be solved as a classification problem by using Machine Learning (ML) methods. In this paper, channel equalization is performed by using ML techniques in terms of Bit Error Rate (BER) analysis and comparison. Radial Basis Functions (RBFs), Multilayer Perceptron (MLP), Support Vector Machines (SVM), Functional Link Artificial Neural Network (FLANN), Long-Short Term Memory (LSTM), and Polynomial-based Neural Networks (NNs) are adopted for channel equalization. [ABSTRACT FROM AUTHOR]

VANET is an application and subclass of MANETs, a quickly maturing, promising, and emerging technology these days. VANETs establish communication among vehicles (V2V) and roadside infrastructure (V2I). As vehicles move with high speed, hence environment and topology change with time. There is no optimum routing protocol which ensures full-pledge on-time delivery of data to destination nodes, and an absolutely optimum scheme design for flawless packet exchange is still a challenging task. In VANETs, accurate and on-time delivery of fundamental safety alert messages (FSAMs) is highly important to withstand against maliciously inserted security threats affectively. In this paper, we have presented a new security-aware routing technique called VANSec. The presented scheme is more immune and resistive against different kinds of attacks and thwarts malicious node penetration attempts to the entire network. It is basically based on trust management approach. The aim of the scheme is to identify malicious data and false nodes. The simulation results of VANSec are compared with already existing techniques called trust and LT in terms of trust computation error (TCE), end-to-end delay (EED), average link duration (ALD), and normalized routing overhead (NRO). In terms of TCE, VANSec is 11.6% and 7.3% efficient than LT and trust, respectively, while from EED comparison we found VANSec to be 57.6% more efficient than trust and 5.2% more efficient than LT. Similarly, in terms of ALD, VANSec provides 29.7% and 7.8% more stable link duration than trust and LT do, respectively, and in terms of NRO, VANSec protocol has 27.5% and 14% lesser load than that of trust and LT, respectively. [ABSTRACT FROM AUTHOR]

Wireless sensor networks are limited by the vast majority of goods with limited resources. Power consumption, network longevity, throughput, routing, and network security are only a few of the research issues that have not yet been addressed in sensor networks based on the Internet of Things. Prior to becoming widely deployed, sensor networks built on the Internet of Things must overcome a variety of technological obstacles as well as general and specific hazards. In order to address the aforementioned problems, this research sought to improve rogue node detection, reduce packet latency/packet loss, increase throughput, and lengthen network lifetime. Wireless energy harvesting is suggested in the proposed three-layer cluster-based wireless sensor network routing protocol to extend the energy lifespan of the network. For the purpose of recognising and blacklisting risky sensor node behaviour, a three-tier clustering architecture with an integrated security mechanism is suggested. This clustering approach is cost-based, and the sink node selects the cluster and grid heads based on the cost function's value. With its seemingly endless potential across a wide range of industries, including intelligent transportation, the Internet of Things (IoT) has gained prominence recently. To analyse the nodes and clustering strategies in IoT, the suggested method PSO is applied. A plethora of new services, programmes, electrical devices with integrated sensors, and protocols have been produced as a result of the Internet of Things' explosive growth in popularity. [ABSTRACT FROM AUTHOR]

Mobile ad hoc networks (MANETs) are generally created for temporary scenarios. In such scenarios, where nodes are in mobility, efficient routing is a challenging task. In this paper, we propose an adaptive and cross-layer multipath routing protocol for such changing scenarios. Our routing mechanisms operate keeping in view the type of applications. For simple applications, the proposed protocol is inspired from traditional on-demand routing protocols by searching shortest routes from source to destination using default parameters. In case of multimedia applications, the proposed mechanism considers such routes which are capable of providing more data rates having less packet loss ratio. For those applications which need security, the proposed mechanism searches such routes which are more secure in nature as compared to others. Cross-layer methodology is used in proposed routing scheme so as to exchange different parameters across the protocol stack for better decision-making at network layer. Our approach is efficient and fault tolerant in a variety of scenarios that we simulated and tested. [ABSTRACT FROM AUTHOR]

A nonuniform grid-based coordinated routing design in wireless sensor networks is presented. The conditions leading to network partition and analysis of energy consumption that prolongs the network lifetime are studied. We focus on implementing routing in densely populated sensor networks. By maintaining constant values for parameters such as path loss exponent, receiver sensitivity and transmit power, and varying between uniform and non-uniform grids, we observe energy consumption patterns for each of the grid structures and infer from the network lifetime the better suited grids for uniformly and randomly deployed sensor nodes. [ABSTRACT FROM AUTHOR]