Search

In this study, the noise resulting from Compton scattering was quantified when gamma images were acquired with a 50-mm thick scintillator array detectors, and the solution method was proposed to its elimination. To perform it, a system capable of recording the events and occurrence times at each one of the 144 scintillator array elements has been developed. This study also presents that the Compton noise was not the dominant source of image quality degradation in the experiment, but its negative influence of the Monte Carlo simulation can increase greatly to lower detection threshold energies. [ABSTRACT FROM AUTHOR]

In this work, we propose a semi-empirical method for determining the thickness of pipe-wall, of which the determination is performed by combining the experimental and Monte Carlo simulation data. The testing measurements show that this is an efficient method to measure the thickness of pipe-wall. In addition, this work also shows that it could use a NaI(Tl) scintillation detector and a low activity source to measure the thickness of pipe-wall, which is simple, quick and high accuracy method. [ABSTRACT FROM AUTHOR]

In this work, an advanced gamma spectrum processing technique is applied to analyze experimental scattering spectra for determining the thickness of C45 heat-resistant steel plates. The single scattering peak of scattering spectra is taken as an advantage to measure the intensity of single scattering photons. Based on these results, the thickness of steel plates is determined with a maximum deviation of real thickness and measured thickness of about 4 %. Monte Carlo simulation using MCNP5 code is also performed to cross check the results, which yields a maximum deviation of 2 %. These results strongly confirm the capability of this technique in analyzing gamma scattering spectra, which is a simple, effective and convenient method for determining material thickness. [ABSTRACT FROM AUTHOR]