Search

A novel 2Li 3 V 2 (PO 4 ) 3 ·LiV 3 O 8 composite with short rod and thin plate shapes is synthesized through sol–gel method followed by hydrothermal and solid–state reaction. LiV 3 O 8 is used as an additive to improve the capacity of Li 3 V 2 (PO 4 ) 3 . In the composite cathode, active impurity phase Li 0.3 V 2 O 5 is also present, which has little impact on the whole electrochemical properties. The 2Li 3 V 2 (PO 4 ) 3 ·LiV 3 O 8 composite delivers a high initial capacity of 162.8 mAh g −1 at a current density of 100 mA g −1 in the voltage range of 2.0–4.3 V. Furthermore, the composite with high crystallinity also shows high electrochemical reversibility and good rate capability. The diffusion coefficient of Li ions in the composite is in the range of 10 −11 –10 −9 cm 2 s −1 obtained from galvanostatic intermittent titration technique. [ABSTRACT FROM AUTHOR]

Abstract: LiVO3 materials are synthesized by combustion method with oxalic acid as fuel. Owing to its relatively low crystallization and small particle size, the LiVO3 calcined at 450 °C for 2 h displays optimal electrochemical performances, delivering a high discharge capacity of 298.4 mAh g−1 and 262.5 mAh g−1 between 1.0 and 3.5 V at a current density of 50 mA g−1 and 500 mA g−1 respectively, and exhibiting good cyclic stability. In this work, the chemical diffusion coefficient of Li+ (D Li+) in the LiVO3 electrode is determined by electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT). The value calculated by EIS is in the range of 10−9–10−8 cm2 s−1, while it calculated by GITT is 10−9.5–10−8 cm2 s−1. [Copyright &y& Elsevier]

Abstract: Surface modified-LiV3O8 cathode materials with Al2O3 are successfully synthesized via a facile thermolysis process. The 0.5 wt.% Al2O3-coated LiV3O8 exhibits an enhanced cyclic stability at various charge–discharge current densities. At a current density of 100 mA g−1, it delivers an initial specific discharge capacity of 283.1 mAh g−1 between 2.0 and 4.0 V. Moreover, high capacities of 139.4 and 118.5 mAh g−1 are obtained at the 100th cycle at current densities of 2000 and 3000 mA g−1, respectively. The improved electrochemical performance is attributed to the Al2O3 coating, which can hinder the irreversible phase transformation and act as a protective layer to prevent the active material from direct contact with electrolyte. Furthermore, the formation of a Li–V–Al–O solid solution at the LiV3O8/Al2O3 interface provides a fast Li+ diffusion path which is of benefit to the electrochemical behaviors. [Copyright &y& Elsevier]

Abstract: Li3V2(PO4)3/C cathode material is synthesized by a carbon-thermal reduction method using polyvinyl alcohol as carbon source at 700°C. The Li3V2(PO4)3/C electrode presents a high initial discharge capacity of 84.3, 111.1, 128.7, 129.2 and 132.1mAhg−1 at −20, 0, 25, 40 and 65°C between 3.0 and 4.3V, and 118.9, 132.1, 187.6, 180.3 and 172.2mAhg−1 between 3.0 and 4.8V at 0.1C, respectively. However, the electrode only delivers small discharge capacities at −20°C at 10C rate. The capacity fade at low temperatures is mainly attributed to the reduced ionic and electronic conductivity of the electrolyte, the increased impendence of solid electrolyte interface (SEI) and charge-transfer resistance on the electrolyte–electrode interfaces. At higher temperatures, the capacity increases with increasing temperature between 3.0 and 4.3V, but decreases between 3.0 and 4.8V. In the potential range of 3.0–4.8V, the larger crystal structural distortion and non-uniformity of SEI layer at high temperatures may be the main reasons for the capacity loss. [Copyright &y& Elsevier]

Abstract: Spherical Li3V2(PO4)3/C composites are synthesized by a soft chemistry route using hydrazine hydrate as the spheroidizing medium. The electrochemical properties of the materials are investigated by galvanostatic charge–discharge tests, cyclic voltammograms and electrochemical impedance spectrum. The porous Li3V2(PO4)3/C spheres exhibit better electrochemical performances than the solid ones. The spherical porous Li3V2(PO4)3/C electrode shows a high discharge capacity of 129.1 and 125.6mAhg−1 between 3.0 and 4.3V, and 183.8 and 160.9mAhg−1 between 3.0 and 4.8V at 0.2 and 1C, respectively. Even at a charge–discharge rate of 15C, this material can still deliver a discharge capacity of 100.5 and 121.5mAhg−1 in the potential regions of 3.0–4.3V and 3.0–4.8V, respectively. The excellent electrochemical performance can be attributed to the porous structure, which can make the lithium ion diffusion and electron transfer more easily across the Li3V2(PO4)3/electrolyte interfaces, thus resulting in enhanced electrode reaction kinetics and improved electrochemical performance. [Copyright &y& Elsevier]