Search

Lithium-ion capacitors, as a hybrid electrochemical energy storage device, realize high specific energy and power density within one device, thus attracting extensive attention. Here, hierarchically porous Li 3 VO 4 /C nanocomposite is prepared by a solvo-thermal reaction, followed with a post-annealing process. This composite has macropores at the center and mesopores in the wall, thus effectively promoting electrolyte penetration and structure stability upon cycling simultaneously. Compared to mesoporous Li 3 VO 4 , the enhanced rate capability and specific capacity of hierarchically porous Li 3 VO 4 /C indicate the synergistic effect of mesopores and macropores. Inspired by these results, this composite is coupled with mesoporous carbon (CMK-3) for lithium-ion capacitors, generating a specific energy density of 105 Wh kg −1 at a power density of 188 W kg −1 . Even if the power density increases to 9.3 kW kg −1 , the energy density still remains 62 Wh kg −1 . All these results demonstrate the promising potential of hierarchically porous Li 3 VO 4 in lithium ion capacitors. [ABSTRACT FROM AUTHOR]

A system of electrolytes using water as a solvent was successfully used to support a typical lithium-ion battery chemistry that operates at 3.7V–4.2 V using standard ultraviolet-cured acrylic-based polymers as hydrophobic barriers. The aqueous electrolyte is contained in a system of poly(ethylene glycol) acrylate polymers crosslinked to produce an electrolyte gel that has electrochemical properties similar to that of the liquid phase component. The electrolyte gels have elastic moduli in the kPa range, making them soft enough to tolerant flexing, cutting, and blunt force impacts while keeping the electrodes covered and safe from shorting. While batteries based on water-in-salt electrolyte provides intrinsic safety that is otherwise unavailable from typical non-aqueous electrolytes, acrylate-based aqueous gel electrolytes offer the potential of large-scale manufacturing owing to the relatively low volatility of the electrolyte components and the low complexity of the proposed manufacturing process. • UV-cured gel electrolytes were used to construct a 4 V lithium ion battery. • The main gel electrolyte was water-based, making the battery safe. • Gel electrolytes had conductivity ≥0.3 mS/cm. • Gel electrolytes exhibited favorable impedance characteristics. • Battery cells used graphite anodes and LiCoO 2 cathodes. [ABSTRACT FROM AUTHOR]