Search

Abstract Volume swelling is a typical mode of battery failures, which happens not only in the operation but also during the storage of rechargeable batteries as a result of electrolyte degradation, particularly the chemical oxidation of electrolyte solvents by the active oxygen released in phase transition of the layered cathode materials. Aiming to remove the active oxygen, we herein propose Pyrite FeS 2 powder as an in-situ oxygen remover based on the fact that FeS 2 can be ultimately oxidized to Fe 2 O 3 and Li 2 SO 4 by the active oxygen, and the redox reaction depletes considerable amount of oxygen. By mixing FeS 2 powder into a conventional LiNi 0.80 Mn 0.10 Co 0.10 O 2 (NMC811) cathode, it is found that under normal cycling conditions of the Li/NMC811 cells, FeS 2 is electrochemically stable while being capable of reacting with active oxygen and hence stabilizing the cell's capacity retention. The concept proposed in this work provides a practically viable and cost-effective approach for preventing volume swelling of the rechargeable batteries based on the layered cathode materials. Graphical abstract Image 1 Highlights • Phase transition and oxygen release is an intrinsic nature of layered cathode materials. • Pyrite FeS 2 is proposed as an in-situ oxygen remover for rechargeable batteries. • In battery FeS 2 is electrochemically stable and capable of removing active oxygen. • FeS 2 suppresses impedance growth and the 2nd structure crack of layered cathode materials. [ABSTRACT FROM AUTHOR]

We report a series of mesoporous silicate sorbent materials templated by long-chain primary alkylamines that display record level of desulfurization of the jet fuel JP-8. Pure silica frameworks and those with a Si:Zr synthesis molar ratio ranging from 44:1 to 11:1 were investigated. The optimum sorbent was identified as dodecylamine-templated silica-zirconia synthesized from a gel with Si:Zr molar ratio of 15:1. With an optimized silver loading of 11 wt.%, a saturation adsorption capacity of 39.4 mgS g −1 and a silver efficiency of 1.21 molS mol Ag −1 were observed for JP-8. This sorbent displayed exceptional regenerability, maintaining 86% of its initial capacity in model fuel after solvent regeneration with diethyl ether. Low-cost, portable and reusable sorbents for the desulfurization of JP-8 jet fuel are needed to make solid oxide fuel cells (SOFCs) a reality for military power needs. SOFCs require ultra-low sulfur content fuel, which traditional desulfurization methods cannot achieve. [ABSTRACT FROM AUTHOR]