Search

Potential oscillations that occur during galvanostatic formic acid oxidation on a Pt electrode are investigated by time-resolved surface-enhanced infrared absorption spectroscopy (SEIRAS). Temporal potential oscillations allowed carbon monoxide (CO) and formate to adsorb on the surface and change their coverages synchronously.

An electrochemical quartz crystal microbalance (EQCM) and in situ electrochemical scanning tunneling microscopy (STM) were used to study the adsorption and electrochemical reduction of PdCl(sub 4)(super 2-) on an Au(111) electrode in H2SO4 solution containing PdCl(sub 4)(super 2-). The palladium deposition was found to proceed with an epitaxial layer-by-layer growth mode. The adlayer of PdCl(sub 4)(super 2-) was found to be on the deposited palladium layer.

This paper reviews the dispersion of complex refractive indices for representative intense vibrational bands of organic liquids in the absolute scale. Conspicuous variations in both real and imaginary refractive indices over the intense bands are precisely determined as a function of infrared wavenumber by attenuated total reflection infrared absorption measurement. The accurate spectral data offer an excellent reference to calibrate the absolute infrared intensities by various quantum chemical calculations, and thus, critical comparison between the present experiment and computation was reported to clarify the general accuracy of the quantum chemical calculations. The precise data of the dispersion will be utilized to clarify their impact on the analysis of vibrational spectroscopy of interfaces in the subsequent paper.

Sharp and intense vibrational bands are characterized with conspicuous dispersion of complex refractive indices. Based on the quantitative data of dispersion in the preceding paper, this paper clarifies the influence of the dispersion on the sum frequency generation (SFG) spectroscopy. As a consequence of the large dispersion, the lineshapes of SFG spectra could be influenced by the frequency dependence of the Fresnel factor as well as the nonlinear susceptibility. This paper argues the relative importance of the two factors in general cases and provides a useful criterion to evaluate their importance. The effect of Fresnel dispersion becomes significant when the SFG spectrum involves a sharp and intense vibrational band as well as a large non-resonant background susceptibility, typically in some solid-liquid interfaces. A possible way to correct the effect of Fresnel dispersion is suggested using the heterodyne measurement.

The pulmonary surfactant monolayer is indispensable for the respiratory system. Recently, it was reported that some unsaturated lipids of the pulmonary surfactants are oxidized by low-level ozone in ambient air. However, the molecular-level understanding of the reaction mechanism is still limited due to technical difficulties. We applied heterodyne-detected sum frequency generation (HD-SFG) spectroscopy to probe the reaction process of an unsaturated phospholipid monolayer (1-palmitoyl-2-oleoyl-glycero-3-phosphocholine, POPC), which is one of the major lipids in the pulmonary surfactant, under low-level ozone (30 ± 5 ppb). The HD-SFG spectroscopy realized the accurate peak assignments of the spectra and the identification of molecular species with high sensitivity, which were impossible with previous measurements. The time-resolved spectra indicated that the C═C moiety in the unsaturated alkyl chain is selectively oxidized by ozone with a time constant of 22 ± 3 min by first-order reaction kinetics. Furthermore, it was revealed for the first time that the reaction product of the POPC monolayer under low-level ozone is not the carboxylic form but the aldehyde form based on the vibrational spectroscopy results. The present study has deepened our molecular-level understanding of the oxidation mechanism of unsaturated lipids that are widely found in many biological systems.

Ambient ozone is a common pollutant in the atmosphere that has an extremely high oxidative ability, can dramatically change the structure and functionality of biomolecules, and is harmful to public health. However, the knowledge about the influence of low-level ozone is still very limited at a molecular level. In the present study, the monolayer of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC, 16:0-18:1 PC) as well as its binary mixed monolayer with 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC, 16:0 PC), which are widely found in many biological systems, have been systematically investigated in a low-level ozone environment (20 ± 10 ppb), by π-A isotherm, sum frequency generation (SFG) vibrational spectroscopy, and atomic force microscopy (AFM). Our results demonstrate that the POPC monolayer is unstable and the C═C moieties in the oleyl chain are selectively oxidized by the low-level ozone. The oxidized lipids from POPC initially remain and reorientate the hydrophilic portion to the water surface and gradually dissolve into the aqueous solution. One should take great caution when using unsaturated lipid molecules to avoid their possible oxidation in the ambient environment. The present study expands and deepens our insights into the oxidation mechanism of unsaturated lipids at a molecular level.

The formation and structure of isotopically asymmetric supported bilayer membranes (SBMs) has been investigated using sum frequency generation (SFG) vibrational spectroscopy supplemented by reflection absorption infrared spectroscopy (RAIRS). The bilayers were composed of a proximal and distal leaflet of the phospholipid dipalmitoyl phosphatidylethanolamine (DPPE) supported on a gold surface. The proximal leaflet was chemically tethered to the gold via an 11-mercapto-undecanoic acid (MUA) self-assembled monolayer (SAM) that had been chemically modified to produce an activated succinimidyl ester headgroup using N-hydroxysuccinimide (NHS) and N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC). The activation of the MUA and the tethering of the DPPE were monitored and confirmed using SFG and RAIRS. The distal leaflet of the bilayer was added using either vesicle fusion (VF) or Langmuir-Blodgett (LB) deposition. To gain insight into the structure of each layer of the SBM perdeuterated DPPE (d-DPPE) and MUA (d-MUA) were used to create SBMs with a layer that was isotopically distinguishable from the rest. The polar orientation and conformational ordering of the lipids was determined using SFG. It was found that the tethering of the proximal lipid leaflet resulted in an increase in the conformational order of the MUA SAM. Furthermore, by careful analysis and comparison of spectra recorded in both the C-H (2800-3000 cm(-1)) and C-D (2000-2300 cm(-1)) stretching regions it was concluded that a better ordered and more biologically relevant lipid bilayer was formed when the distal leaflet was added using LB deposition. On the other hand the SFG spectra of the SBMs in which the distal leaflet was added by VF showed little evidence of conformational ordering on the time scale of minutes, suggesting the presence of an incomplete monolayer or of multilayer formation.

Surface-enhanced infrared absorption spectroscopy (SEIRAS) combined with cyclic voltammetry or chronoamperometry has been utilized to examine kinetic and mechanistic aspects of the electrocatalytic oxidation of formic acid on a polycrystalline Pt surface at the molecular scale. Formate is adsorbed on the electrode in a bridge configuration in parallel to the adsorption of linear and bridge CO produced by dehydration of formic acid. A solution-exchange experiment using isotope-labeled formic acids (H(12)COOH and H(13)COOH) reveals that formic acid is oxidized to CO(2) via adsorbed formate and the decomposition (oxidation) of formate to CO(2) is the rate-determining step of the reaction. The adsorption/oxidation of CO and the oxidation/reduction of the electrode surface strongly affect the formic acid oxidation by blocking active sites for formate adsorption and also by retarding the decomposition of adsorbed formate. The interplay of the involved processes also affects the kinetics and complicates the cyclic voltammograms of formic acid oxidation. The complex voltammetric behavior is comprehensively explained at the molecular scale by taking all these effects into account.

The potential of in-situ Fourier transform infrared (FTIR) spectroscopy measurements in an attenuated total reflection configuration (ATR-FTIRS) for the evaluation of reaction pathways, elementary reaction steps, and their kinetics is demonstrated for formic acid electrooxidation on a Pt film electrode. Quantitative kinetic information on two elementary steps, formic acid dehydration and CO(ad) oxidation, and on the contributions of the related pathways in the dual path reaction mechanism are derived from IR spectroscopic signals in simultaneous electrochemical and ATR-FTIRS measurements over a wide temperature range (25-80 degrees C). Linearly and multiply bonded CO(ad) and bridge-bonded formate are the only formic acid related stable reaction intermediates detected. With increasing temperature, the steady-state IR signal of CO(ad) increases, while that of formate decreases. Reaction rates for CO(ad) formation via formic acid dehydration and for CO(ad) oxidation as well as the activation energies of these processes were determined at different temperatures, potentials, and surface conditions (with and without preadsorbed CO from formic acid dehydration) from the temporal evolution of the IR intensities of CO(ad) during adsorption/reaction transients, using an IR intensity-CO(ad) coverage calibration. At potentials up to 0.75 V and temperatures from 25 to 80 degrees C, the "indirect" CO pathway contributes less than 5% (at potentials < or =0.6 V significantly below 1%) to the total Faradaic reaction current, making the "direct" pathway by far the dominant one under the present reaction conditions. Much higher activation energies for CO(ad) formation and CO(ad) oxidation compared with the effective activation energy of the total reaction, derived from the Faradaic currents, support this conclusion.

Sum frequency generation (SFG) vibrational spectra of cadmium arachidate multilayer films adsorbed on a substrate with high nonresonant susceptibility, i.e., gold, and on a low nonresonant susceptibility substrate, i.e., fused quartz, have been investigated in the C-H stretching region in air. The films were formed by Langmuir-Blodgett (LB) deposition and their spectra recorded using SFG spectrometers employing both 532-nm nanosecond and 800-nm femtosecond lasers, with counter-propagating and co-propagating beam geometries, respectively. Both kinds of substrate were rendered hydrophobic by coating them with per-deuterated octadecanethiol (gold) or per-deuterated cadmium arachidate (fused quartz) monolayers. Single per-protonated arachidate layers in otherwise per-deuterated 10-layer films were used to show that the SFG resonances arise only from the topmost and lowermost layers in a LB film comprised of an even number of per-protonated layers, although the SFG spectra from the two hydrophobic substrates are different from each other. The differences in the spectra from the same ten-layer per-protonated films deposited on the two types of hydrophobic substrate have been explained in terms of a simple model that accounts for resonant and nonresonant contributions.

Hydrogen bonding effects on surface structure, photophysical properties, and photoelectrochemistry have been examined in a mixed film of porphyrin and fullerene composites with and without hydrogen bonding on indium tin oxide and nanostructured SnO2 electrodes. The nanostructured SnO2 electrodes modified with the mixed films of porphyrin and fullerene composites with hydrogen bonding exhibited efficient photocurrent generation compared to the reference systems without hydrogen bonding. Atomic force microscopy, infrared reflection absorption, and ultraviolet-visible absorption spectroscopies and time-resolved fluorescence lifetime and transient absorption spectroscopic measurements disclosed the relationship between the surface structure and photophysical and photoelectrochemical properties relating to the formation of hydrogen bonding between the porphyrins and/or the C60 moieties in the films on the electrode surface. These results show that hydrogen bonding is a highly promising methodology for the fabrication of donor and acceptor composites on nanostructured semiconducting electrodes, which exhibit high photoelectrochemical properties.