Search

In the process of hydraulic fracturing of shale gas horizontal wells in the Weiyuan area of Sichuan, China, casing deformation (CD) is a frequent problem that has seriously affected the benefits of shale gas development and remains to be solved for many years. In this paper, based on the analyses of Multi-finger Imaging Tool-24 (MIT-24) data, microseismic data, and the relationship between CD and engineering parameters, we confirm that the wellbore morphology in all CD sections in the Weiyuan area is consistent with shear deformation characteristics and clarify the cause of all CD: hydraulic fracturing leads to increased fluid pressure in well-intersecting faults and large fractures (F-Fs), inducing their shear slip, and eventually leads to asymmetric compression on the casing by strata on both sides of F-Fs, i.e., CD. On this basis, we propose a set of methods to control (or moderate) the shear slip of F-Fs by reducing the additional fluid pressure in target F-Fs during hydraulic fracturing to prevent CD, including multi-cluster perforations, temporary plugging F-Fs and fracturing fluid flowback. We also analyze the theoretical basis, feasibility and workflow of these methods. These methods have been tested in 44 horizontal wells in the Weiyuan area, of which the result is a radical decrease in the CD rate of the single well (from 54% to 9.1%), indicating that the slip of F-Fs and the resulting CD during hydraulic fracturing can be controlled and providing a reference for the prevention of hydraulic fracturing-induced earthquakes. • All CD during hydraulic fracturing of shale gas in the Weiyuan area is caused by induced shear slip of F-Fs. • Temporary plugging can reduce the additional fluid pressure in target F-Fs so as to prevent CD. • The integrated technical methods have been proved to be effective in preventing CD in field application. [ABSTRACT FROM AUTHOR]

Breakthroughs in shale gas exploration in the Upper Ordovician-Lower Silurian strata of the Upper Yangtze Platform have attracted interest in its sedimentary-tectonic evolution, but the tectonic background of the northern margin of the Upper Yangtze Platform remains unclear. In this paper, the Wufeng-Longmaxi formations on the northern margin of the Upper Yangtze Platform were investigated. Based on geochemical and mineralogical analyses of the tuffs/K-bentonites of the Wufeng Formation and the barite in the Longmaxi Formation, as well as previous research results, it was concluded that the northern margin of the Upper Yangtze Platform was in an extensional tectonic background during the Late Ordovician-Early Silurian. Detailed analysis revealed that, (1) the U–Pb zircon age of the tuff in the Bajiaokou section in South Qinling is 443.91 ± 0.92 Ma. The Zr/TiO 2 –Nb/Y diagram of the tuffs/K-bentonites indicates that their protoliths were alkaline-subalkaline basalt and andesite series rock. Based on the Th–Hf/3-Ta, Th–Tb*3-Ta*2, and TiO 2 –Nb/3-Th diagrams, there are undiscovered intraplate tension calc-alkaline basalts in the northern Yangtze Platform or the southern Qinling region, which provided volcanic clastic materials to the Ziyang, Lan'gao, Chengkou, Yichang and other regions. (2) Scanning electron microscopy revealed that the barite crystals in the Longmaxi Formation exhibit dissolution features and have a large particle size. Energy spectrum analysis of these barite crystals revealed that they have C, O, S, and Ba contents of 8.48 wt%, 22.98 wt%, 13.09 wt% and 55.44 wt%, so they are speculated to have been formed via cold methane seep genesis in a weak extensional tectonic setting. The 87Sr/86Sr ratios of the barite revealed that different types of barite were simultaneously formed in this area under the influences of hydrothermal and cold methane seeps. (3) The analysis of the heavy minerals in the Lower Silurian strata in the Bajiaokou section revealed that the provenance in the South Qinling area changed significantly during the late Early Silurian. Based on the above analyses, the northern margin of the Upper Yangtze Platform was in an extensional tectonic setting during the Late Ordovician-Early Silurian. The distribution of the total organic carbon content indicated that the extensional tectonic background provided good conditions for the enrichment and preservation of organic matter. The results of this study provide an understanding of the regional sedimentary-tectonic pattern and evolution of the Yangtze Platform during this period, as well as a reference for future shale gas exploration in this region. • The tectonic background of the Late Ordovician-Early Silurian was studied. • The northern margin of the Upper Yangtze Platform is an extensional background. • The extensional tectonics caused the cold seepage events. • The extensional fault controlled the distribution of volcanic clastic sediments. • Organic matter accumulation was influenced by the extensional fault depression. [ABSTRACT FROM AUTHOR]

An appropriate shut-in after fracturing can dramatically enhance performance of wells in shale gas reservoirs. In this study, a novel wettability index and mineral content curve based shut-in time optimization approach was proposed. First, a new experimental device for spontaneous imbibition of fracturing fluid under the conditions of formation temperature and confining pressure was designed. Then, we conduct a set of experiments on shale samples from the Longmaxi Formation (LF) in the Sichuan Basin to measure the water-wet index and determine the critical value of clay content. Finally, the low-field nuclear magnetic resonance (NMR) equipment was used to monitor the water flow in shale micro-pores, based on this, the shut-in time for different shale reservoirs was optimized. The experimental results show that LF shale hydration can induce new micro-fractures, and the fractures shape is mainly shale bedding fractures, with obvious directionality. The clay content is the key factor affecting water wettability of shale and the critical clay content value of type I and type II shale reservoirs was about 39.5%. The optimal shut-in time of type I and type II shale reservoirs are about 20 days and 15 days respectively. Field application of three wells showed that the average daily gas production was increased by 2–3 times. The research results can guide the development of shale gas reservoirs effectively. • In this paper, the water imbibition experiment of shale under the condition of formation temperature and pressure of shale reservoir was carried out, and the critical clay content affecting the imbibition capacity of shale was determined. • On this basis, the shut-in-time of different reservoirs types was further optimized. • The research results play an important guiding role in understanding the flow law of fracturing fluid in shale reservoirs. [ABSTRACT FROM AUTHOR]

The Longmaxi Formation has abundant shale gas resources. High-yield wells have been obtained in medium-shallow and deep areas in the Sichuan Basin. Quantitative research on the brittle-ductile change in rocks is a basic geological component for caprock evaluation, and it can also be applied to shale gas exploration. This paper fully considers the difference between the lower shale (N1) and upper shale (N2) of the Longmaxi gas-bearing shale. Through total organic carbon (TOC), mineral components, field emission scanning electron microscopy (FE-SEM), and triaxial mechanics experiments, the two groups of shale samples, N1 and N2, were compared and analyzed, and the brittle-ductile transition was quantitatively studied. Based on previous work, a method for the fast calculation of the key over consolidation ratio (OCR) was proposed. The results show that N1 is mainly organic-rich siliceous shale, N2 is primarily organic-poor clay shale and mixed shale, and N1 is generally more brittle than N2. The key OCRs of N1 and N2 are 2.16 and 2.60, respectively. The key confining pressures at which N1 and N2 become fully ductile are 87.87 MPa and 70.28 MPa, respectively. Therefore, the key depths of the brittle zones of N1 and N2 (H b1 and H b2) and the key depths of the ductile zones of N1 and N2 (H d1 and H d2) are obtained. On this basis, a comprehensive model for the Longmaxi shale gas' brittle-ductile transition exploration zone in the Sichuan Basin and H b1 and H b2 maps of the Longmaxi gas-bearing shale have been established. Through comprehensive vertical and horizontal analysis, Longmaxi shale gas exploration risks in different blocks of the Sichuan Basin have been clarified. Therefore, this study of the variation in the brittle-ductile transition has an important guiding role in refining the exploration of Longmaxi shale gas in the Sichuan Basin. • There are obvious differences between the lower shale and the upper shale. • Difference of brittle-ductile transition makes shale gas exploration more complicated. • The new method can quickly calculate the threshold value of over consolidation ratio. • The new model provides more comprehensive guidance for shale gas exploration. [ABSTRACT FROM AUTHOR]

The estimated ultimate recovery (EUR) of a single shale gas well is one of the important evaluation indicators for the scale and benefit development of shale gas. Nevertheless, due to the lack of engineering and geologic data, as well as the limitations of the existing empirical methods, the current production forecasting methods cannot make reasonable predictions for EUR. Therefore, Duong method is used as the prototype in this paper, a rapid and accurate empirical model for improved production prediction is proposed based on the historical production profile analysis of mass producing wells in Sichuan Basin. The accuracy and universality of the new model are verified by production examples in the Weiyuan, Changning, Luzhou and Yuxi blocks of the Sichuan Basin. The examples illustrate that the new model can be applied well in typical wells, and has no limitation of flow regimes for the production prediction of gas wells. In order to solve the problem of production data fluctuation and decline curve deviation caused by stimulation measures in the production process, a multi-segment production prediction model analysis method is proposed based on the improved model in this study and has been well applied in the field. Most importantly, the new model has clear physical parameters and is easy to operate. Performance of the new model based on production data is as reasonable as the modern production decline methods (including analytical model), which is better than existing empirical methods. • Proposing an improved empirical model, which is rapid and accurate. • Less parameters were selected, the new model still has clear physical meaning. • Application condition of the new model is not limited by the flow regime. • Performance of the new model based on production data is as reasonable as the analytical model. • Multi-segment production prediction model is well applied to gas wells with production data fluctuation. [ABSTRACT FROM AUTHOR]

The upper Permian Longtan Formation (LTF) shale is a new shale gas exploration and development focus in China, which was formed in a transitional depositional environment. Because of the difference in the sedimentary environment between marine-continental transitional shale and marine shale, the enrichment characteristics and mechanism of organic matter (OM) are very different. Because of a weak research foundation, the enrichment mechanism of OM in the LTF shale in the Sichuan Basin is still unclear. In this paper, shale samples of the upper Permian LTF from the Well F5 were collected, and the abundance, source and sedimentary environment of organic matter were studied by using paleoclimate, detrital input, redox, paleoproductivity and sedimentation rate parameters. The results show that the TOC content of the LTF shale is high (average = 3.04%) and reaches the high to overmature stage (average = 2.46%), indicating a favorable source rock. The LTF shale was deposited in a humid and hot climate, which was conducive to the growth and prosperity of a large number of plants. The source of organic matter was mainly terrestrial plant fragments. The sedimentary environment of the LTF shale was oxic, it had a high sedimentation rate, which reduced the oxidation rate of OM, promoted the rapid deposition of OM, and ensured the preservation of organic matter. In summary, the enrichment of OM of LTF shale in the Sichuan Basin was affected by the sedimentary environment, which was complicated. The main controlling factors were detrital input, redox conditions and sedimentation rate. • The geochemical characteristics of Permian Longtan Formation (PLTF) shale in eastern Sichuan are analyzed. • The sedimentary paleoenvironment of PLTF shale in eastern Sichuan is reconstructed. • The main controlling factors of organic matter enrichment of PLTF in eastern Sichuan are studied for the first time. [ABSTRACT FROM AUTHOR]

The lamellation fractures in marine shales are important to the accumulation and preservation of shale gas, whose characteristics and controlling factors are still unclear. This paper focus on the characteristics descriptions and controlling factor analyses based on core observations, thin sections, and scanning electron microscope (SEM) experiments. The marine shales of Paleozoic Wufeng Formation and Longmaxi Formation in the Fuling Area of Eastern Sichuan Basin are taken as an instance. The lamellation fractures are occurring along the direction of the lamellations, partially of them curved, bifurcated, and converged. The apertures of fractures typically range from 1 to 500 μm. Only a few (<1%) lamellation fractures are filled with quartz, calcite, pyrite, and bitumen. After a series of analyses, developments of lamellation fractures are controlled by total organic carbon (TOC), brittle minerals, laminae, and pyrite. (1) The organic matters control the formation and evolution of lamellation fractures by generating gas and resulting in overpressure. An increase in the TOC content of 1% can increase the lamellation fracture density by 0.26 cm-1. (2) Brittle minerals, especially authigenic quartz, is also an important controlling factor to the development of lamellation fractures. When BI increases by 10%, the lamellation fracture density increases by 19%. (3) Besides, siliceous and carbonate laminae in the shale are more suitable for lamellation fractures to develop. When the laminae density is smaller than 4 cm−1, it is easier to develop lamellation fractures with higher laminae density. However, too densely-distributed laminae will suppress the formation of lamellation fractures. (4) Higher pyrite content is good for the development of lamellation fractures. Lamellation fracture density will increase by 9%, with pyrite content increased by 1%. For the shale at the bottom of the Wufeng Formation - Longmaxi Formation, lamellation fractures develop extensively due to the high TOC and pyrite content, great brittleness, and moderate laminae density. The density of lamellation fractures decreases from the bottom to the top. • Quantitative characterize about development characteristics of the lamellation fractures. • The lamellation fractures is controlled by brittle mineral, TOC, laminae and pyrite. • TOC is the main one that affects the development of lamellation fractures. • Clarify vertical distribution characteristic of lamellation fractures in the Wufeng-longmaxi Fm. [ABSTRACT FROM AUTHOR]

Fractures gradually open under the action of fluid pressure in drilling shale gas reservoirs because of the existence of shale natural fractures, which leads to the leakage of expansible fractures. Induced fracture leakage is difficult to find and control in the early stage of drilling, resulting in great economic losses. The current model of induced fracture leakage pressure model is based on takes rock fracture criterion, which can only be used to judge whether the fracture is fractures created or not but cannot analyze the influence of fracture width change on leakage pressure after natural fracture of shale cracking. In addition, the model cannot control the occurrence of leakage. In this paper, the calculation method of fracture's width change under induced pressure is established. According to the field leakage rate data, a dynamic model of leakage pressure is established based on the parameters of time, leakage rate, fracture's width, fluid viscosity, and wellbore radius. The model is applied to calculate the dynamic change of leakage pressure on the Sichuan Shale Gas Field site and control the induced fracture's change to control leakage. Results show the following observations. (i) The fracture's width and leakage velocity of induced fracture increase with the increase of leakage pressure. Blocking the leakage when any leakage is found on the site is not advisable because it can increase the fracture's width artificially and increase leakage. (ii) The critical value of the fracture's width may cause severe leakage. When the leakage's differential pressure remains unchanged, the relationship between the fracture's width and leakage velocity refers to the power exponent change. The method of controlling the leakage pressure and reducing the fracture's width that is less than the critical leakage fracture degree is adopted for the leakage of the shale gas drilling in the Longmaxi Formation field Jiaoshiba, which effectively reduces the leakage amount. Taking a particular project, for example, controlling leakage pressure of induced fracture is given to verify the feasibility of the method. • The calculation method of fracture's width change under induced pressure is established. • A modal of leakage pressure is established based on time,leakage rate,fracture's width,and fluid viscosity. • The method of controlling the pressure to reduce the fracture's width to control the leakage is established. [ABSTRACT FROM AUTHOR]

The Lower Paleozoic Ordovician Wufeng Formation and the Silurian Longmaxi Formation shale in the southeastern part of Sichuan Basin in China are the key strata for shale gas exploration. In this paper, based on a large number of outcrops, cores and natural gamma spectroscopy logs combined with scanning electron microscopy, geochemical parameter testing and mineral component analysis, the geological conditions and exploration potential of shale gas accumulation were studied in this area, and the relationship between structure and shale gas preservation is discussed. The vertical reduction in the U/Th ratio measured in the outcrop sandstone lenses and core horizontal bedding and observed in the energy spectrum logs indicates that the sedimentary water body transformed from a low-energy anoxic reducing environment to a high-energy oxidizing environment. The TI index and the kerogen carbon isotope indicate that the organic matter type of the shale is mainly type I kerogen. The TOC content of high-quality shale is generally above 2.50%, and the R o value is between 2.00% and 3.08%. High organic matter abundance, moderate thermal evolution and a large thickness of high-quality shale ensure an adequate supply of hydrocarbon resources. Multiple types of inorganic pores, primary organic pores and pores formed during hydrocarbon generation provide abundant reservoir space for the enrichment of shale gas. The tectonics have an important influence on the preservation of shale gas. Moderate fracture development, a late tectonic uplift time, small-scale tectonic uplift, and high formation pressure coefficient are conducive to the preservation of shale gas, and the gas content and productivity will be higher. Overall, a structural stability zone with a high formation pressure coefficient is a favorable area for shale gas exploration. • Comprehensive analysis the sedimentary environment based on three scales: outcrop, core and energy spectrum logging. • Later and small-scale tectonic uplift, moderate fracture development, good roof preservation are conducive to gas enrichment. • A structural stability zone with a high formation pressure coefficient is a favorable area for shale gas exploration. [ABSTRACT FROM AUTHOR]