Search

This study was designed to analyze the effects of type of activity and cruciate ligament resection on knee kinematics and ligament balance after total knee arthroplasty (TKA), and to determine if intraoperative passive kinematics are associated with active kinematics. Fresh-frozen human cadaveric knees were examined. The knees were mounted on a quadriceps-driven simulator. Cruciate-retaining (CR-TKA) and posterior-substituting (PS-TKA) TKA was performed using a contemporary knee system. Active flexion (closed-kinetic chain (CKC) and open-kinetic-chain (OKC)) and passive flexion were analyzed by recording the knee kinematics using a specifically developed application of an imageless navigation system. An electronic ligament balancer was used to measure the tibiofemoral gap under constant distraction pressure. The femur rotated externally relative to the tibia during passive and active CKC flexion. The femur translated anteriorly from 10° to 50° of flexion after TKA. Beyond 50° of flexion, the femur translated posteriorly in all surgical conditions. The femoral location during active CKC flexion was posterior relative to that during active OKC. Femoral rotation and translation during passive knee flexion correlated significantly with that during active knee flexion. Posterior tilt of the electronic ligament balancer was greater with CR-TKA than with PS-TKA and correlated significantly with the anteroposterior position of the femur. Statement of Clinical Significance: Intraoperative knee kinematics measured by computer-assisted navigation and intraoperative ligament balance have the potential to predict postoperative knee kinematics. This article is protected by copyright. All rights reserved.

Since dislocation of total hip replacements (THR) remains a clinical problem, its mechanisms are still in the focus of research. Previous studies ignored the impact of soft tissue structures and dynamic processes or relied on simplified joint contact mechanics, thus, hindered a thorough understanding. Therefore, the purpose of the present study was to use hardware-in-the-loop (HiL) simulation to analyze systematically the impact of varying implant positions and designs as well as gluteal and posterior muscle function on THR instability under physiological-like loading conditions during dynamic movements. A musculoskeletal multibody model emulated the in situ environment of the lower extremity during deep sit-to-stand with femoral adduction maneuver while a six-axis robot moved and loaded a THR accordingly to feed physical measurements back to the multibody model. Commercial THRs with hard-soft bearings were used in the simulation with three different head diameters (28, 36, 44 mm) and two offsets (M, XL). Cup inclination of 45°, cup anteversion of 20°, and stem anteversion of 10° revealed to be outstandingly robust against any instability-related parameter variation. For the flexion motion, higher combined anteversion angles of cup and stem seemed generally favorable. Total hip instability was either deferred or even avoided even in the presence of higher cup inclination. Larger head diameters (>36 mm) and femoral head offsets (8 mm) deferred occurrence of prosthetic and bone impingement associated with increasing resisting torques. In summary, implant positioning had a much higher impact on total hip stability than gluteal insufficiency and impaired muscle function. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2557-2566, 2017.

Meniscus injury and degeneration have been linked to the development of secondary osteoarthritis (OA). Therapies that successfully repair or replace the meniscus are, therefore, likely to prevent or delay OA progression. We investigated the novel approach of building layers of aligned polylactic acid (PLA) electrospun (ES) scaffolds with human meniscus cells embedded in extracellular matrix (ECM) hydrogel to lead to formation of neotissues that resemble meniscus-like tissue. PLA ES scaffolds with randomly oriented or aligned fibers were seeded with human meniscus cells derived from vascular or avascular regions. Cell viability, cell morphology, and gene expression profiles were monitored via confocal microscopy, scanning electron microscopy (SEM), and real-time polymerase chain reaction (PCR), respectively. Seeded scaffolds were used to produce multilayered constructs and were examined via histology and immunohistochemistry. Morphology and mechanical properties of PLA scaffolds (with and without cells) were influenced by fiber direction of the scaffolds. Both PLA scaffolds supported meniscus tissue formation with increased COL1A1, SOX9, and COMP, yet no difference in gene expression was found between random and aligned PLA scaffolds. Overall, ES materials, which possess mechanical strength of meniscus and can support neotissue formation, show potential for use in cell-based meniscus regeneration strategies.

Hip dislocation is a major short-term complication after total hip arthroplasty (THA). One factor thought to reduce the risk for dislocation is head size. We constructed subject-specific computer models to study the effect of head size on risk for postoperative dislocation. Femoral and acetabular geometry was constructed after segmenting CT scans of nine hips. CAD models of THA components with four head diameters (28, 32, 36, and 44 mm) were virtually implanted. Hip capsular ligaments were simulated using rigid-body ellipsoids connected by non-linear springs. Posterior dislocation was simulated during a rise from a low chair; anterior dislocation was simulated during a pivot activity. Intraoperative stability tests were simulated for anterior or posterior dislocation. While rising from a low chair (posterior dislocation) and during the pivot activity (anterior dislocation), increasing head size significantly increased hip flexion angle at dislocation and generated higher dislocation moments. Larger heads reduced the risk for dislocation. Intraoperative stability tests detected the relative increased resistance to dislocation despite differences in the absolute magnitude of moments. This model can be useful preclinical tool for assessing design changes, the effect of component placement, and the activity-based risk for dislocation. © 2014 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 32:1525–1531, 2014.

Mechanical loading is believed to be a critical factor in the development and treatment of knee osteoarthritis. However, the contact forces to which the knee articular surfaces are subjected during daily activities cannot be measured clinically. Thus, the ability to predict internal knee contact forces accurately using external measures (i.e., external knee loads and muscle electromyographic [EMG] signals) would be clinically valuable. We quantified how well external knee load and EMG measures predict internal knee contact forces during gait. A single subject with a force-measuring tibial prosthesis and post-operative valgus alignment performed four gait patterns (normal, medial thrust, walking pole, and trunk sway) to induce a wide range of external and internal knee joint loads. Linear regression analyses were performed to assess how much of the variability in internal contact forces was accounted for by variability in the external measures. Though the different gait patterns successfully induced significant changes in the external and internal quantities, changes in external measures were generally weak indicators of changes in total, medial, and lateral contact force. Our results suggest that when total contact force may be changing, caution should be exercised when inferring changes in knee contact forces based on observed changes in external knee load and EMG measures. Advances in musculoskeletal modeling methods may be needed for accurate estimation of in vivo knee contact forces.

Lower body positive pressure (LBPP) treadmills permit significant unweighting of patients and have the potential to enhance recovery following lower limb surgery. We determined the efficacy of an LBPP treadmill in reducing knee forces in vivo. Subjects, implanted with custom electronic tibial prostheses to measure forces in the knee, were tested on a treadmill housed within a LBPP chamber. Tibiofemoral forces were monitored at treadmill speeds from 1.5 mph (0.67 m/s) to 4.5 mph (2.01 m/s), treadmill incline from � 108 to þ108, and four treadmill chamber pressure settings adjusted to decrease net treadmill reaction force from 100% to 25% of the subject's body weight (BW). The peak axial tibiofemoral force ranged from 5.1 times BW at a treadmill speed of 4.5 mph (2.01 m/s) and a pressure setting of 100% BW to 0.8 times BW at 1.5 mph (0.67 m/s) and a pressure setting of 25% BW. Peak knee forces were significantly correlated with walking speed and treadmill reaction force (R 2 ¼ 0.77, p ¼ 0.04). The LBPP treadmill might be an effective tool in the rehabilitation of patients following lower-extremity surgery. The strong correlation between tibiofemoral force and walking speed and treadmill reaction forces allows for more precisely achieving the target knee forces desired during early rehabilitation. 2012 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res

Actin and tubulin cytoskeletal components are studied extensively in chondrocytes, but less is known about vimentin intermediate filaments. In other cell types, vimentin is a determinant of cell stiffness and disruption of vimentin networks weakens the mechanical integrity of cells. Changes in vimentin organization correlate with osteoarthritis progression, but the functional consequences of these changes remain undetermined in chondrocytes. The objective of this study was to compare the contribution of vimentin to the mechanical stiffness of primary human chondrocytes isolated from normal versus osteoarthritic cartilage. Chondrocytes were embedded in alginate and vimentin networks disrupted with acrylamide. Constructs were imaged while subjected to 20% nominal strain on a confocal microscope stage, and the aspect ratios of approximately 1,900 cells were measured. Cytosolic stiffness was estimated with a finite element model, and live-cell imaging of GFP-vimentin was used to further analyze the nature of vimentin disruption. Vimentin in normal chondrocytes formed an inner cage-like network that was substantially stiffer than the rest of the cytosol and contributed significantly to overall cellular stiffness. Disruption of vimentin reduced stiffness approximately 2.8-fold in normal chondrocytes. In contrast, osteoarthritic chondrocytes were less stiff and less affected by vimentin disruption. This 3D experimental system revealed contributions of vimentin to chondrocyte stiffness previously not apparent, and correlated changes in vimentin-based chondrocyte stiffness with osteoarthritis.

Tibial tray malalignment has been associated with increased subsidence and failure. We constructed a finite element model of knee arthroplasty to determine the biomechanical factors involved in increasing the risk of subsidence with malalignment. Four fresh-frozen human knees were implanted with a tibial tray and subjected to forces representative of walking for up to 100,000 cycles. Cyclic displacement was measured between the tray and proximal tibia. The vertical load was shifted medially to generate a load distribution ratio of 55:45 (medial/lateral) to represent neutral alignment or 75:25 to represent varus alignment. Subjected specific geometry and material properties were obtained from qCT scans of tibia to construct a finite element model. The tray was subjected to a single load cycle representing experimental conditions. Tray displacement computed by the model matched that measured experimentally. Forces representing varus tray alignment generated greater strains in the proximal tibia and a greater volume of bone was subjected to strains higher than the fatigue threshold. Local compressive strains directly correlated with experimental subsidence and failure. Our results indicate that failure after tray malalignment is likely due to fatigue damage to the proximal tibia rather than shear across the implant–bone interface or failure of the cement mantle. © 2010 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 29:347–353, 2011

First-generation crosslinked polyethylene developed for total hip arthroplasty has not gained wide acceptance for knee arthroplasty because of the increased potential for failure under high stresses and the increased risk for oxidative damage caused by free radicals. Sequentially crosslinked polyethylene (SQXL) is a second-generation crosslinked polyethylene that is reported to reduce the level of free radicals and preserve mechanical properties. Three groups of ultrahigh molecular weight polyethylene inserts were wear tested after artificial aging as per ASTM F2003: gamma-irradiated in air (GA-aged), sequentially crosslinked (SQXL-aged), and electron-beam irradiated and remelted (EBeam-aged). Inserts were tested in an AMTI knee wear simulator under malalignment conditions that were two standard deviations from the mean reported for computer-navigated and conventionally aligned techniques. GA-aged inserts delaminated by 500,000 cycles, and were severely damaged after 1 million cycles. None of the highly crosslinked inserts (SQXL-aged or EBeam-aged) delaminated or showed any signs of severe wear. Mean wear rate for GA-aged inserts was 124.6 ± 49.4 mg/million cycles. Mean wear rates for SQXL-aged and EBeam-aged inserts were significantly lower (1.74 ± 0.3 and 4.72 ± 0.7, respectively). These results support the low levels of free radicals and preservation of mechanical properties reported in second-generation crosslinked ultrahigh molecular weight polyethylene. © 2008 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res, 2008

We implanted an electronic knee prosthesis to measure tibial forces in vivo during activities of daily living after total knee arthroplasty. We used tibial forces and knee kinematic data collected in vivo to calculate contact stresses using finite element analysis. The polyethylene insert was modeled as an elastoplastic material, and predicted contact stresses were validated using pressure sensitive sensors. Peak contact stresses generated during walking were similar but about 18% lower than those calculated for International Standards Organization (ISO)-recommended wear simulation conditions. Stair climbing generated higher contact stresses (32 MPa) than walking (26 MPa). However, both high flexion activities (lunge and kneel) generated even higher contact stresses, with the lunge activity generating the highest stresses (56 MPa). The activities that generated high contact stresses also resulted in high equivalent plastic strain. However, the lunge activity generated dramatically higher plastic equivalent strain than the other activities. In vivo measurement of kinematics, forces, and contact stresses may be used to develop more clinically relevant wear simulator protocols. Contact stresses generated during high flexion activities were substantially higher and were largely due to the reduced contact area in deep flexion rather than due to an increase in contact forces. Our results support the use of "high flexion" designs that improve contact conditions and preserve contact area at high flexion angles.

Hip range of motion after total hip arthroplasty has been shown to be dependent on prosthetic design and component placement. We hypothesized that bony anatomy would significantly affect range of motion. Computer models of a current generation hip arthroplasty design were virtually implanted in a model of pelvis and femur in various orientations ranging from 35 degrees to 55 degrees cup abduction, 0 degrees to 30 degrees cup anteversion, and 0 degrees to 30 degrees femoral anteversion. Four head sizes ranging from 22.2 to 32 mm and two neck sizes ranging from 10-mm and 12-mm diameter were tested. Range of motion was recorded as maximum flexion-extension, abduction-adduction, and axial rotation of the femur before any contact between prosthetic components or bone was detected. Bony impingement preceded component impingement in about 44% of all conditions tested, ranging from 66% in adduction to 22% in extension. Range of motion increased as head size increased. However, increasing head size also increased the propensity for bony impingement, which tended to reduce the beneficial effect of increased head size on range of motion. Reducing neck diameter had a greater effect on prosthetic impingement (mean, 3.5 degrees increase in range of motion) compared to bone impingement (mean, 1.9 degrees ). This model allowed for a clinically relevant assessment of range of motion after total hip arthroplasty and may also be used with patient-specific geometry [such as that obtained from preoperative computed tomography (CT) scans] for more accurate preoperative planning.

Advances in cross-linking have led to the development of wear resistant ultrahigh molecular weight polyethylene for total joint replacement. This study compared wear reduction by two different cross-linking methods as measured in a hip wear simulator. One highly cross-linked polyethylene was treated with 7.5 Mrad gamma irradiation with post-irradiation annealing and a sterilization dose of 2.5 Mrad (10 Gamma), while the other used 9.5 Mrad warm irradiation with 10 MeV electron-beam (9.5 EB). Liners of the same design, made from nominally cross-linked (gamma sterilized) polyethylene were also tested. Gravimetric wear analysis was performed every 500,000 cycles for 5,000,000 cycles. After correcting for weight gain due to water absorption, the nominally cross-linked liners demonstrated mean wear rates of 15.7 (±1.7) and 12.5 (±1.0) mg/million cycles. Both highly cross-linked polyethylene liners demonstrated significantly less wear than their respective controls (with mean wear rates of 1.5 (±1.2) and −1.4 (±1.5) mg/million cycles). The 9.5 EB liners gained weight presumably due to increased fluid absorption, in addition to that measured in loaded–soaked control implants. Any wear occurring was therefore assumed to have been more than offset by weight gain. Highly cross-linked polyethylene was significantly more wear resistant than non- or nominally cross-linked polyethylene. The differences in wear rates between the two highly cross-linked polyethylene designs (9.5 EB or 10 Gamma) are probably too small to be clinically significant.