Search

The reaction of the benzothiazolate-capped triosmium clusters Os 3 (CO) 9 (μ 3 ,η 2 -C 7 H 3 NSR)(μ-H) ( 1a , R = H; 1b , R = Me) with PPh 3 proceeds readily at room temperature with a μ 3 ,η 2 → μ,η 2 hapticity change in the benzothiazolate heterocycle to furnish Os 3 (CO) 9 (PPh 3 )(μ,η 2 -C 7 H 3 NSR)(μ-H) ( 2a , R = H; 2b , R = Me) in high yields. X-ray crystallography has confirmed the regiospecific nature of this reaction where the PPh 3 ligand is bound to the osmium atom that serves as the coordination site for the hydride and the metalated-carbon atom associated with the edge-bridged benzothiazolate ligand. The thermolysis of 2a and 2b in boiling toluene affords several new Os 3 clusters as a result of ligand isomerization, decarbonylation, and ortho metalation of the ancillary PPh 3 ligand. The new products have been isolated and characterized by a combination of spectroscopic methods and X-ray crystallography in the case of 3b , 4b , 5b and 6b . Clusters 3b and 4b are isomers of 2b and differ in the location of the hydride and PPh 3 ligands relative to the benzothiazolate moiety. Electronic structure calculations on the isomeric clusters 2b , 3b , and 4b confirm that 2b is the kinetic product of ligand substitution, accounting for its rearrangement to the latter two isomers upon heating. Cluster 5b contains a face-capping benzothiazolate moiety and is shown by DFT calculations to derive from a site-selective loss of an axial CO group in 4b . Cluster 6a,b formed from 5a,b as a result of further decarbonylation with concomitant ortho metalation of one of the phenyl groups of the coordinated PPh 3 ligand. [ABSTRACT FROM AUTHOR]

Reactions of Ru3(CO)10(µ-dppf) (1) (dppf = 1,1'-bis(diphenylphosphino)ferrocene), Ru3(CO)10(µ-dppm) (2) (dppm = bis(diphenylphosphino)methane), and the orthometalated derivative Ru3(CO)9{µ3- PPhCH2PPh(C6H4)} (3) with silanes (Ph3SiH, Et3SiH, Ph2SiH2) are reported. Treatment of 1 with Ph3SiH and Ph2SiH2 at room temperature leads to facile Si--H bond activation to afford Ru3(CO)9(µ-dppf)(SiPh3)(µ-H) (4) (60% yield) and Ru3(CO)9(µ-dppf)(SiPh2H)(µ-H) (6) (53% yield), respectively. The reaction of 1 with Ph3SiH has been investigated by electronic structure calculations, and these data have facilitated the analysis of the potential energy surface leading to 4. Compound 1 does not react with Et3SiH at room temperature but reacts at 68 °C to give Ru3(CO)9(µ-dppf)(SiEt3)(µ-H) (5) in 45% yield. Reaction of 2 with Ph3SiH at room temperature yields two new products: Ru3(CO)9(µ-dppm)(SiPh3)(µ-H) (7) in 40% yield and Ru3(CO)6(µ3-O)(µ-dppm)(SiPh3)(µ- H)3 (8) in 15% yield. Interestingly, at room temperature compound 7 slowly reverts back to 2 in solution with decomposition and liberation of Ph3SiH. Complex 8 can also be prepared from the direct reaction between 7 and H2O. Similar reactions of 2 with Et3SiH and Ph2SiH2 give only intractable materials. The orthometalated compound 3 does not react with Ph3SiH, Et3SiH and Ph2SiH2 at room temperature but does react at 66 °C to give Ru3(µ-CO)(CO)7{µ3- PPhCH2PPh(C6H4)}(SiR2R¹)(µ- H)](9, R = R' = Ph, 71% yield; 10, R = R' = Et, 60% yield; 11, R = Ph, R' = H, 66% yield) by activation of the Si--H bond. Compounds 4 and 8--11 have been structurally characterized. In 4, both the dppf and the hydride bridge a common Ru--Ru vector, whereas NMR studies on 7 indicate that two ligands span different Ru--Ru edges. Compound 8 contains a face-capping oxo moiety, a terminally coordinated SiPh3 ligand, and three bridging hydride ligands, whereas 9--11 represent simple oxidative addition products. In all of the compounds examined, the triruthenium framework retains its integrity and the silyl groups occupy equatorial sites. [ABSTRACT FROM AUTHOR]

The series of complexes [XRu(CO)(L–L)(L′)2][PF6] (X = H, TFA, Cl; L–L = 2,2′-bipyridyl, 1,10-phenanthroline, 5-amino-1,10-phenanthroline and 4,4′-dicarboxylic-2,2′-bipyridyl; L′2 = 2PPh3, Ph2PC2H4PPh2, Ph2PCH＝CHPPh2) have been synthesized from the starting complex K[Ru(CO)3(TFA)3] (TFA = CF3CO2) by first reacting with the phosphine ligand, followed by reaction with the L–L and anion exchange with NaPF6. In the case of L–L = phenanthroline and L′2 = 2PPh3, the neutral complex Ru(Ph3P)(CO)(1,10-phenanthroline)(TFA)2 is also obtained and its solid state structure is reported. Solid state structures are also reported for the cationic complexes where L–L = phenanthroline, L2 = 2PPh3 and X = Cl and for L–L = 2,2′-bipyridyl, L2 = 2PPh3 and X = H. All the complexes were characterized in solution by a combination of 1H and 31P NMR, IR, mass spectrometry and elemental analyses. The purpose of the project was to synthesize a series of complexes that exhibit a range of excited-state lifetimes and that have large Stokes shifts, high quantum yields and high intrinsic polarizations associated with their metal-to-ligand charge-transfer (MLCT) emissions. To a large degree these goals have been realized in that excited-state lifetimes in the range of 100 ns to over 1 μs are observed. The lifetimes are sensitive to both solvent and the presence of oxygen. The measured quantum yields and intrinsic anisotropies are higher than for previously reported Ru(II) complexes. Interestingly, the neutral complex with one phosphine ligand shows no MLCT emission. Under the conditions of synthesis some of the initially formed complexes with X = TFA are converted to the corresponding hydrides or in the presence of chlorinated solvents to the corresponding chlorides, testifying to the lability of the TFA Ligand. The compounds show multiple reduction potentials which are chemically and electrochemically reversible in a few cases as examined by cyclic voltammetry. The relationships between the observed photophysical properties of the complexes and the nature of the ligands on the Ru(II) is discussed. [Copyright &y& Elsevier]

Abstract: We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N–N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X=N–CH3, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X=N–CH3, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)3[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X=N–CH3, 1; X=O, 2; X=S, 3) and Re(CO)3[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X=N–CH3, 4; X=O, 5; X=S, 6) were synthesized heating at reflux Re(CO)5Cl with the appropriate N–N ligand in toluene. The corresponding pyridine set {Re(CO)3[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF6 (X=N–CH3, 7; X=O, 8; X=S, 9) and {Re(CO)3[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF6 (X=N–CH3, 10; X=O, 11; X=S, 12) was synthesized by halide abstraction with silver nitrate of 1–6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes. [Copyright &y& Elsevier]

Abstract: Heating [Os3(CO)10(μ-dppm)] (1) with two equivalents of PhSSPh in toluene under reflux provided three new triosmium compounds [(μ-H)Os3(CO)7(μ-SPh){μ3-η4-Ph2PCHP(Ph)C6H4}] (2), [Os3(CO)8(μ-SPh)2(μ-dppm)] (3) and [(μ-H)Os3(CO)7(μ-η2-SC6H4)(μ-SPh)(μ-dppm)] (4) in 20%, 21% and 26% yields, respectively. In contrast, a similar reaction of 1 with two equivalents of PhTeTePh in refluxing toluene gave the binuclear compound [Os2(CO)4(μ-TePh)2(μ-dppm)] (6) in 15% yield, and two 50 electron isomeric compounds 5 and 7 with the formula [Os3(CO)8(μ-TePh)2(μ-dppm)] in 20% and 23% yields, respectively. Thermolysis of 3 at 110°C afforded 4 in 53% yield which on further thermolysis in refluxing octane at 128°C gave 2 in 45% yield. Thermolysis of 3 in refluxing octane also gave 2 in 50% yield. The new compounds, 2–7, were all spectroscopically characterized, and the X-ray structures of 2, 3 and 7 have been determined. Compound 2 contains a bridging SPh ligand and a μ3,η4-Ph2PCHP(Ph)C6H4 ligand, formed by two kinds of C–H activation, including orthometallation of a phenyl group as well as an unusual activation of the methylene group of the dppm ligand. The molecular structure of 3 reveals that two SPh groups span the open Os–Os edge of the Os3 triangle, while the dppm ligand bridges one of the closed Os–Os edges. In compound 7, one TePh group spans the open Os–Os edge, while the other spans one of the two closed Os–Os edges and the dppm ligand bridges the third Os–Os vector. [Copyright &y& Elsevier]

The reaction of [Ru3(CO)10(mu-dppm)] (1) with dppmSe at 66 °C affords [Ru3(CO)8(mu-dppm)2] (2), [Ru3(CO)7(mu3-CO)(mu3-Se)(mu-dppm)] (3), [Ru3(CO)5(mu3-CO)(mu3-Se)(mu-dppm)2] (4) and [Ru3(CO)6(mu3-CO)(mu3-Se)(mu-dppm)(mu1-Ph2PCH2P(double bond; length as m-dashO)Ph2)] (5) in 7%, 5%, 9% and 33% yields, respectively. A similar reaction between 1 with dppmS gives [Ru3(CO)7(mu3-S)2(mu-dppm)] (6), [Ru3(CO)7(mu3-CO)(mu3-S)(mu-dppm)] (7) [Ru3(CO)5(mu3-CO)(mu3-S)(mu-dppm)2] (8) and [Ru3(CO)6(mu3-CO)(mu3-S)(mu-dppm)(mu1-Ph2PCH2P(double bond; length as m-dashO)Ph2)] (9) in 8%, 7%, 14% and 35% yields, respectively. Treatment of 1 with PhSeSePh at 66 °C affords the dinuclear compound [Ru2(CO)4(mu-SePh)2(mu-dppm)] (10) in 14% yield. Thermolysis of 5 and 9in refluxing toluene at 110 °C gives 4 and 8, respectively. The molecular structures of 4, 9 and 10 have been determined by single-crystal X-ray diffraction studies. The cores of the new clusters 4, 5, 8 and 9 consist of metal triangles capped by mu3-sulfur or selenium atoms with the bidentate ligand bridging in equatorial positions. In compounds 4 and 8, two bidentate dppm ligands bridge the Ru3 triangle in such a way that each ligand bridges two ruthenium atoms and one Ru-Ru edge remains unbridged. Compounds 5 and 9 contain one bridging dppm ligand and one dangling dppm mono-oxide ligand Ph2PCH2P(double bond; length as m-dashO)Ph2 coordinated to the rear metal atom at an equatorial position. The molecular structure of 10 shows classical "sawhorse" structure with two bridging SePh ligands as well as the dppm ligand. [ABSTRACT FROM AUTHOR]