Search

Purpose: The aim of this study was to evaluate soft tissue changes after intraoral quadrangular Le Fort II osteotomy (IOQLFII) and correlate those changes to underlying osseous changes.Materials and Methods: Twenty-six non-growing patients with midfacial deficiency and Class III malocclusion were analyzed. A study group of 13 patients who underwent IOQLFII was compared with 13 patients who underwent conventional Le Fort I osteotomy (LFI). After fusion of pre- and postoperative computed tomograms, each patient's hard and corresponding soft tissue changes were measured. Measurement points were defined at 3 levels in the IOQLFII group (infraorbital rim [IR], sinus floor [SF], and lateral incisor tip [LI]) and at 2 levels in the LFI group (SF and LI). Linear models were created to test for correlations between hard and soft tissues.Results: The slope (a1 coefficient) between anteroposterior hard and soft tissue changes was found to be highly significant at each measurement point for all groups. In the IOQLFII group, soft tissue advancement was 69% (confidence interval [CI], 62 to 77%) of the hard tissue advancement at the IR, 90% (CI, 84 to 96%) at the SF, and 73% (CI, 64 to 82%) at the LI. In the LFI group, the corresponding percentages were 90% (83 to 97%) at SF and 84% (77 to 90%) at LI.Conclusion: IOQLFII results in predictable correction of midfacial deficiency. At the IR, bony advancement always resulted in markedly less soft tissue advancement than at the SF level. These results indicate that the planned infraorbital advancement should not be too conservative because soft tissue changes are smaller in this region. [ABSTRACT FROM AUTHOR]

Purpose In the present study, we report an innovative workflow using polyetheretherketone (PEEK) patient-specific implants for esthetic corrections in the facial region through onlay grafting. The planning includes implant design according to virtual osteotomy and generation of a subtraction volume. The implant design was refined by stepwise changing the implant geometry according to soft tissue simulations. Materials and Methods One patient was scanned using computed tomography. PEEK implants were interactively designed and manufactured using rapid prototyping techniques. Positioning intraoperatively was assisted by computer-aided navigation. Two months after surgery, a 3-dimensional surface model of the patient's face was generated using photogrammetry. Finally, the Hausdorff distance calculation was used to quantify the overall error, encompassing the failures in soft tissue simulation and implantation. Results The implant positioning process during surgery was satisfactory. The simulated soft tissue surface and the photogrammetry scan of the patient showed a high correspondence, especially where the skin covered the implants. The mean total error (Hausdorff distance) was 0.81 ± 1.00 mm (median 0.48, interquartile range 1.11). The spatial deviation remained less than 0.7 mm for the vast majority of points. Conclusions The proposed workflow provides a complete computer-aided design, computer-aided manufacturing, and computer-aided surgery chain for implant design, allowing for soft tissue simulation, fabrication of patient-specific implants, and image-guided surgery to position the implants. Much of the surgical complexity resulting from osteotomies of the zygoma, chin, or mandibular angle might be transferred into the planning phase of patient-specific implants. [ABSTRACT FROM AUTHOR]

PURPOSE: Registration of preoperative targeting information for the intraoperative situation is a crucial step in computer-assisted surgical interventions. Point-to-point registration using acrylic splints is among the most frequently used procedures. There are, however, no generally accepted recommendations for sterilization of the splint. An appropriate method for the thermolabile splint would be hydrogen peroxide-based plasma sterilization. This study evaluated the potential deformation of the splint undergoing such sterilization. Deformation was quantified using image-processing methods applied to computed tomographic (CT) volumes before and after sterilization. MATERIALS AND METHODS: An acrylic navigation splint was used as the study object. Eight metallic markers placed in the splint were used for registration. Six steel spheres in the mouthpiece were used as targets. Two CT volumes of the splint were acquired before and after 5 sterilization cycles using a hydrogen peroxide sterilizer. Point-to-point registration was applied, and fiducial and target registration errors were computed. Surfaces were extracted from CT scans and Hausdorff distances were derived. Effectiveness of sterilization was determined using Geobacillus stearothermophilus. RESULTS: Fiducial-based registration of CT scans before and after sterilization resulted in a mean fiducial registration error of 0.74 mm; the target registration error in the mouthpiece was 0.15 mm. The Hausdorff distance, describing the maximal deformation of the splint, was 2.51 mm. Ninety percent of point-surface distances were shorter than 0.61 mm, and 95% were shorter than 0.73 mm. No bacterial growth was found after the sterilization process. CONCLUSION: Hydrogen peroxide-based low-temperature plasma sterilization does not deform the splint, which is the base for correct computer-navigated surgery. [ABSTRACT FROM AUTHOR]

Purpose: Registration of preoperative targeting information for the intraoperative situation is a crucial step in computer-assisted surgical interventions. Point-to-point registration using acrylic splints is among the most frequently used procedures. There are, however, no generally accepted recommendations for sterilization of the splint. An appropriate method for the thermolabile splint would be hydrogen peroxide–based plasma sterilization. This study evaluated the potential deformation of the splint undergoing such sterilization. Deformation was quantified using image-processing methods applied to computed tomographic (CT) volumes before and after sterilization. Materials and Methods: An acrylic navigation splint was used as the study object. Eight metallic markers placed in the splint were used for registration. Six steel spheres in the mouthpiece were used as targets. Two CT volumes of the splint were acquired before and after 5 sterilization cycles using a hydrogen peroxide sterilizer. Point-to-point registration was applied, and fiducial and target registration errors were computed. Surfaces were extracted from CT scans and Hausdorff distances were derived. Effectiveness of sterilization was determined using Geobacillus stearothermophilus. Results: Fiducial-based registration of CT scans before and after sterilization resulted in a mean fiducial registration error of 0.74 mm; the target registration error in the mouthpiece was 0.15 mm. The Hausdorff distance, describing the maximal deformation of the splint, was 2.51 mm. Ninety percent of point-surface distances were shorter than 0.61 mm, and 95% were shorter than 0.73 mm. No bacterial growth was found after the sterilization process. Conclusion: Hydrogen peroxide–based low-temperature plasma sterilization does not deform the splint, which is the base for correct computer-navigated surgery. [ABSTRACT FROM AUTHOR]

PURPOSE: The present study was conducted to evaluate the effect of platelet-rich plasma (PRP) on new bone formation and remodeling after grafting of the maxillary sinus with an algae-derived hydroxyapatite AlgOss/C Graft/Algipore. MATERIALS AND METHODS: Fourteen consecutive patients with severely atrophic maxillae underwent uni- or bilateral grafting of the maxillary sinus with a mixture of collected bone, algae-derived hydroxyapatite AlgOss/C Graft/Algipore (ratio 1:10), and a combined addition of PRP and thrombin (Tissucol Kit; Baxter, Vienna, Austria) to allow for fast clotting. After an average healing period of 7.1 months bone samples were retrieved. Patients from a former consecutive series treated without PRP served as control group. Statistical analysis was done by Welch 2-sample t test and mixed linear model testing. RESULTS: In the coronal specimen portions, mean values for newly formed bone area, biomaterial area and marrow space of 32.2% ± 10.4%, 20.1% ± 13.0%, and 47.7% ± 8.5% were found with PRP, respectively. In the control group the corresponding values were 27.6% ± 13.4%, 20.3% ± 12.9%, and 52.1% ± 9.3%. In the apical specimen portions in the PRP group, the newly formed bone area, biomaterial area, and marrow space was 25.7% ± 15.0%, 23.4% ± 14.9%, and 50.9% ± 12.5%, respectively. The corresponding values in the control group were 17.0% ± 8.6%, 34.5% ± 11.2%, and 48.5% ± 8.5%. CONCLUSIONS: Statistical evaluation of the samples proved significantly better overall resorption of algae-derived hydroxyapatite AlgOss/C Graft/Algipore and increased new bone formation when PRP was used, especially in the apical region. [ABSTRACT FROM AUTHOR]

Purpose: The present study was conducted to evaluate the effect of platelet-rich plasma (PRP) on new bone formation and remodeling after grafting of the maxillary sinus with an algae-derived hydroxyapatite AlgOss/C Graft/Algipore. Materials and Methods: Fourteen consecutive patients with severely atrophic maxillae underwent uni- or bilateral grafting of the maxillary sinus with a mixture of collected bone, algae-derived hydroxyapatite AlgOss/C Graft/Algipore (ratio 1:10), and a combined addition of PRP and thrombin (Tissucol Kit; Baxter, Vienna, Austria) to allow for fast clotting. After an average healing period of 7.1 months bone samples were retrieved. Patients from a former consecutive series treated without PRP served as control group. Statistical analysis was done by Welch 2-sample t test and mixed linear model testing. Results: In the coronal specimen portions, mean values for newly formed bone area, biomaterial area and marrow space of 32.2% ± 10.4%, 20.1% ± 13.0%, and 47.7% ± 8.5% were found with PRP, respectively. In the control group the corresponding values were 27.6% ± 13.4%, 20.3% ± 12.9%, and 52.1% ± 9.3%. In the apical specimen portions in the PRP group, the newly formed bone area, biomaterial area, and marrow space was 25.7% ± 15.0%, 23.4% ± 14.9%, and 50.9% ± 12.5%, respectively. The corresponding values in the control group were 17.0% ± 8.6%, 34.5% ± 11.2%, and 48.5% ± 8.5%. Conclusions: Statistical evaluation of the samples proved significantly better overall resorption of algae-derived hydroxyapatite AlgOss/C Graft/Algipore and increased new bone formation when PRP was used, especially in the apical region. [ABSTRACT FROM AUTHOR]

Purpose: We evaluated an innovative approach for conventional surgical or transmucosal implantation applying backward planning with bone oriented crown down implant positions, followed by immediate restoration. Materials and Methods: Our workflow combined computer-assisted preoperative planning with the well-known intraoperative handling of surgical templates. To guarantee optimal accuracy, the complete process was bone borne, not soft tissue borne. Furthermore, in this concept, the definite prosthesis was manufactured on a plaster cast and fixed with technical implants inserted into the model using the same drilling template applied for intraoperative guidance of the drill. This bone-based workflow avoids the accumulation of errors throughout all steps of the treatment. In the present study, we have provided a concise quantitative quality control using 4 in vivo implants. This goal was accomplished by image matching of the preoperative plan with the corresponding postoperative computed tomography scan, applying descriptive statistics, the 1-sample t test, and the Student t test. Results: Statistical evaluation showed that the bone-borne drilling template provides sufficient accuracy for immediate restoration with the definite prosthesis at the end of the operation. Deviation in the apex plane was 0.8 ± 0.42 mm, with 0.33 at the maximum. The angular deviation was 3.18° ± 0.78°. Conclusions: Our workflow is a promising approach with respect to handling, accuracy, and intraoperative safety. [Copyright &y& Elsevier]

Purpose: Large-scale studies assessing complication rates and correlation of complications are still missing considering different fracture locations in the mandible. In the present retrospective study, complication rates of mandibular angle fractures treated by open reduction were assessed. Materials and Methods: Three hundred twenty-two patients (259 men, 63 women) with 335 surgically treated mandibular angle fractures were included in this study. Results: Fractures were caused by fights (46.6%), falls (19.2%), traffic accidents (14.6%), sports (11.9%), wisdom tooth removal (7.3%), and 0.9% other causes. Successful treatment occurred in 93.69% of fractures with 1 open reduction and in 6.31% with 2 open reductions. Of surgically treated patients, 71.47% (238) were completely free of complications. A detailed complication correlation matrix is given in the text. Ninety-five fractures treated with 1 miniplate, 170 with 2 miniplates, and 70 with other osteosynthesis concepts were compared regarding osteosynthesis failure and pseudarthrosis. Conclusion: Similar osteosynthesis failure rates were shown for 1 miniplate and 2 miniplates. [Copyright &y& Elsevier]

Purpose: In this study we report our experiences with the treatment of midfacial fractures and various other indications in regions with low load bearing (eg, dysmorphias) using the biodegradable Osteosynthesis System (SonicWeld Rx by KLS Martin, Tuttlingen, Germany), comprising biomechanical and histological aspects. Patients and Methods: Seventy-five patients were included in this study. We describe the application of this system for the treatment of fractures of the zygomamaxillary complex, frontal bone impression fractures, surgical treatment of mukocele in the frontal sinus, isolated fractures of the orbital floor, complex midfacial trauma and bone cap fixation, craniosynostoses, and fixation of a distracted bone fragment. Results: The pin insertion could be finished with a total failure rate of lower than 5%. In 3 patients, soft tissue swellings in regions with less subcutaneous fat were observed 6 to 8 months postoperatively. No fracture dislocations occurred. Scanning electron micrograph of the experimentally acquired connection between the resorbable plate and 2 pins clearly demonstrates a tight and reliable fusion to bone, both at the cortical as well as at the spongy compartment. Conventional histology leads to corresponding findings as scanning electron micrography, and shows a close fusion between all components. Conclusion: This retrospective study shows the general feasibility, sufficient mechanical stability, and efficient intraoperative handling of this angle-stable, ultrasonic-guided resorbable Osteosynthesis System (ResorbX and SonicWeld Rx) for a wide variety of indications in craniomaxillofacial surgery. [Copyright &y& Elsevier]

Purpose: To evaluate the feasibility and accuracy of a new method for planning and realizing zygomatic osteotomies in cases of established post-traumatic deformities using stereolithographic (SL) models and computer assisted navigation. Patients and Methods: In 5 patients, osteotomy and repositioning of the zygomatic complex was planned using SL models. The desired position of the zygoma in the patient was determined by fixing individualized osteosynthesis plates to predefined screw positions. The SL model and the patient were registered to the same 3-dimensional computed tomography data set via an occlusal reference frame on the patient and corresponding reference markers on the model. Prebent osteosynthesis plates from the surgical simulation on the model were fixed to corresponding screw positions on the patient, which were located by computer-assisted navigation. Evaluation of accuracy was performed by image fusion of postoperative computed tomography scans of the model and the patient. Results: Clinical outcome was satisfactory in all cases. The evaluation by image fusion showed alignment of the patient’s and the model’s zygoma in 4 of 5 cases. Mean measured distance between screw positions in the models and the patients were 1.1 ± 0.3 mm for 44 screws. In 1 patient the treatment plan was changed intraoperatively because of unforeseen soft tissue limitations. Conclusion: Point-to-point navigation is an accurate method to transfer the planning of a complex osteotomy from the SL model to the actual surgical procedure. Surgery is facilitated considerably because repositioning and osteosynthesis are achieved in 1 step. [Copyright &y& Elsevier]

Purpose: In this work the experiences from 50 telemedically supported treatments in craniomaxillofacial surgery are summarized and different setups for their technical realization are described. Furthermore, for the first time the innovative UMTS (universal mobile telecommunication system) is applied for the transmission of arthroscopic videos of the temporomandibular joint and other craniomaxillofacial structures. Materials and Methods: The combination of computer-assisted navigation technology in augmented reality environments with telecommunication is used for execution of interactive stereotaxic teleconsultation. Furthermore, treatments without navigation are telemedically supported. This study is composed of 4 technical system configurations: 1) integrated services digital network (ISDN)-based videoconferencing without remote control of the navigation computer; 2) transmission control protocol/internet protocol (TCP/IP)-based interactive teleconsultation via bundled ISDN lines (including remote control of the navigation computer); 3) TCP/IP-based interactive teleconsultation via network; 4) combination of TCP/IP-connection and ISDN-based videoconferencing. The telemedically supported treatments are: orbitozygomatic osteotomies, positioning of the mandibular condyle in orthognathic surgery, insertion of implants, positioning of the maxilla in orthognathic surgery, distraction osteogenesis, arthroscopies of the temporomandibular joint, and operation simulations on stereolithographic models. The surgical interventions are evaluated on a 5-level system performance scale from the technical point of view. In a separate trial 20 videosequences of arthroscopies of the temporomandibular joint are transmitted via UMTS cellular phones and independently evaluated by 3 experts (ie, a total of 60 streamings) to investigate feasibility of this technology in the field of craniomaxillofacial surgery. Results: In the years from 1996 to 2002 a total of 50 treatments were telemedically supported. All intraoperative applications were successfully finished; 48 of 60 UMTS transmissions were finished without any interruptions in constant quality, slight interruptions were observed in 8 tests, and a complete breakdown was observed during 4 streamings that required a restart of the transmission. Resolution was sufficient to diagnose even tiny anatomic structures inside the temporomandibular joint, but orientation was hardly recognizable. Conclusion: In many applications telecommunication technology can contribute to a quality improvement in cranio- and maxillofacial surgery because of the global availability of specialized knowledge. The required technical expenditure for teleconsultation crucially depends on the infrastructure that is already available at the clinic and the remote site. UMTS is a promising technology with the potential to be valuable in numerous craniomaxillofacial applications. [Copyright &y& Elsevier]

Purpose: In planning intraoral quadrangular Le Fort II osteotomy (IQLFIIO), simulation of hard and soft tissue changes will be important at the infraorbital, Le Fort I, and incisor level. The aim of our study was to evaluate a new method for visualization and quantification.Materials and Methods: Three different methods of quantification were compared: the point-to-point (PTP) measurement, which has been viewed as the reference standard; part comparison analysis (PCA); and a new method, the midfacial advancement line (MFAL) measurement. We performed a measurement comparison study using the Bland-Altman method to measure agreement and enrolled patients with midfacial deficiency and Class III malocclusion who had undergone IQLFIIO. The primary predictor variable was the method of measurement. The primary outcome variable was the amount of midfacial advancement. We also investigated the time required, visualization quality, and interobserver agreement.Results: The sample included 12 subjects with a mean age of 21.6 years; 7 patients were male. The PTP and MFAL showed no significant observer dependence. The advancement measured with PTP and MFAL showed no significant differences. However, the advancement measured using MFAL and PCA showed a significant difference. The highest rating of visualization was found for MFAL. The time requirements were similar for all 3 methods.Conclusions: Our results have shown that the MFAL is a suitable method for visualization and quantification of soft and hard tissue changes at all 3 face levels in 1 image. It could be a valuable tool for virtual planning of midfacial advancement surgery. [ABSTRACT FROM AUTHOR]