Search

AbstractWildfires can negatively impact the health and well-being of wildland firefighters through a variety of exposure pathways. Many studies have measured acute health effects from occupational exposure to pollutants in wildfire smoke; however, research specifically examining cancer risks from exposure to carcinogens is limited. This review aimed to better understand cancer risk in this occupation by assessing the existing evidence of exposures and summarizing measured concentrations of carcinogens among wildland firefighters. A systematic search was conducted to identify scientific papers using the following databases: Medline(OVID), Embase(OVID), PsycINFO(OVID), Cochrane Library, CINAHL(EBSCOHost), EconLit(EBSCOHost), Scopus, Agricultural and Environmental Science Collect(ProQuest), and NIOSHTIC-2. Forty-nine papers were identified that met eligibility criteria. Across the papers, 31 carcinogens were identified and quantified using a variety of assessment methods. Papers measured particulate matter (N = 26), polycyclic aromatic hydrocarbons (N = 12), volatile organic compounds (N = 14), crystalline silica (N = 5), black carbon (N = 4), asbestos (N = 3), radionuclides (N = 7), and metals (N = 2). Most papers measured inhalation exposures through traditional air sampling methods, but a subset of exposures to polycyclic aromatic hydrocarbons (N = 8), as well as heavy metals (N = 1), were measured through urinary biomarkers and naphthalene was measured using dermal wipe samples (N = 2). Although the heterogeneity of exposure assessment methods made direct comparison of concentrations difficult, the papers provide consistent evidence that wildland firefighters are regularly exposed to carcinogens. All wildland fire personnel should continue to implement recommended mitigation strategies and support new mitigations to reduce exposure to carcinogens on the job. [ABSTRACT FROM AUTHOR]

This paper assesses the judgments of leading radiation geneticists and cancer risk assessment scientists from the mid-1950s to mid-1970s that background radiation has a significant effect on human genetic disease and cancer incidence. This assumption was adopted by the National Academy of Sciences (NAS) Biological Effects of Atomic Radiation (BEAR) I Genetics Panel for genetic diseases and subsequently applied to cancer risk assessment by other leading individuals/advisory groups (e.g., International Commission on Radiation Protection-ICRP). These recommendations assumed that a sizeable proportion of human mutations originated from background radiation due to cumulative exposure over prolonged reproductive periods and the linear nature of the dose-response. This paper shows that the assumption that background radiation is a significant cause of spontaneous mutation, genetic diseases, and cancer incidence is not supported by experimental and epidemiological findings, and discredits erroneous risk assessments that improperly influenced the recommendations of national and international advisory committees, risk assessment policies, and beliefs worldwide. [ABSTRACT FROM AUTHOR]

With advances in technology, there are an increasing number of direct-reading instruments available to occupational health and safety professionals to evaluate occupational aerosol exposures. Despite the wide array of direct-reading instruments available to professionals, the adoption of direct-reading technology to monitor workplace exposures has been limited, partly due to a lack of knowledge on how the instruments operate, how to select an appropriate instrument, and challenges in data analysis techniques. This paper presents a review of direct-reading aerosol instruments available to occupational health and safety professionals, describes the principles of operation, guides instrument selection based on the workplace and exposure, and discusses data analysis techniques to overcome these barriers to adoption. This paper does not cover all direct-reading instruments for aerosols but only those that an occupational health and safety professional could use in a workplace to evaluate exposures. Therefore, this paper focuses on instruments that have the most potential for workplace use due to their robustness, past workplace use, and price with regard to return on investment. The instruments covered in this paper include those that measure aerosol number concentration, mass concentration, and aerosol size distributions. [ABSTRACT FROM AUTHOR]

AbstractThis paper aims to investigate the effectiveness of personal protective equipment (PPE) in reducing firefighter exposure to various hazardous chemicals from the smoke emitted during fires. A systematic review of peer-reviewed articles was undertaken utilizing five databases: Medline, Embase, Web of Science, Scopus, and CINHAL. Studies published between 2013 and 2023 that investigated the effectiveness of PPE in reducing firsthand exposure to at least one chemical were included. Extracted data were grouped into two overarching themes related to PPE: (a) Respiratory Protection and (b) Personal Protective Clothing (PPC). Overall, 21 studies met the inclusion criteria and were considered for further analysis. Respiratory protection, particularly self-contained breathing apparatus (SCBA), offered the most protection in preventing inhalation exposure to chemical hazards. There was limited evidence on the effectiveness of firefighter turnout gear in reducing skin contamination. Combustion contaminants, especially highly volatile compounds like benzene, were found to permeate and penetrate through and around the protective clothing. In conclusion, certain respirators, particularly SCBA, provided the best protection against inhalation exposure to chemicals; however, PPC did not appear to provide complete protection, particularly against the more volatile chemicals like benzene. [ABSTRACT FROM AUTHOR]

This review is about the ethical use of sensors to monitor occupational exposure to hazards. It considers whether the same or different, ethical measures apply to using sensors, compared to conventional hazard monitoring surveys. To undertake the review, subject experts developed a research question, identified suitable search terms, and set the scope of these searches. Candidate research papers dating from 2000 to mid-2022 that met inclusion criteria were identified and reviewed by each author. Ethical concerns were identified by the authors of studies in which sensors were used to monitor employee health and well-being, but most of the studies that used them to monitor employee exposure to hazards focused on the technical aspects of their deployment. These ethical concerns included questions about employee rights and privacy, the anonymity of the data collected with sensors, and how the security of this data is managed. The review considers ethical standards and codes of practice for occupational hygiene work and the ethical risks when sensors are used to gather data. Sensors may provide insight into occupational exposure to hazards, but their use is not always adequately explained to employees by those managing this monitoring work. The ethical concerns identified were relevant to many areas of industrial hygiene work, but more studies are required that consider the ethical use of sensors in workplaces. Studies that monitored employee health, well-being, and productivity, identified ethical risks in using sensors to monitor these endpoints. An ethical framework and checklist for hygienists are proposed including a set of questions that consider the risks of using sensors to monitor occupational hazards. Industrial hygiene professional bodies provide ethical codes of practice for their members but may also need to consider the implications of using sensors in workplaces. Ethical standards support the collection of industrial hygiene exposure data whilst maintaining the privacy rights of employees. [ABSTRACT FROM AUTHOR]

Sensors and sensor systems for monitoring fine particles with aerodynamic diameters smaller than 2.5 µm can provide real-time feedback on indoor air quality and thus can help guide actions to manage indoor air pollutant concentrations. Standardized verification of the performance and accuracy of sensors and sensor systems is crucial for predicting the efficacy of such monitoring. A new ASTM International standard test method (ASTM D8405) was created for this need and is the most exacting laboratory protocol published to date for evaluating indoor air quality sensors and sensor systems measuring particles smaller than 2.5 µm in diameter. ASTM D8405 subjects sensors and sensor systems to five test phases: (1) an initial particle concentration ramp; (2) exposure to various temperature and humidity conditions; (3) exposure to interfering particles; (4) temperature cycling; and (5) a final particle concentration ramp to assess drift. This paper discusses the development of the standard test method, key aspects of the testing process, example evaluation results, and a comparison of this standard test method against peer evaluation protocols. [ABSTRACT FROM AUTHOR]

Simple plastic face shields have numerous practical advantages over regular surgical masks. In light of the spreading COVID-19 pandemic, the potential of face shields as a substitution for surgical masks was investigated. In order to determine the efficacy of the protective equipment we used a cough simulator. The protective equipment considered was placed on a manikin head that simulated human breathing. Concentration and size distribution of small particles that reached the manikin respiration pathways during the few tens of seconds following the cough event were monitored. Additionally, water sensitive papers were taped on the tested protective equipment and the manikin face. In the case of frontal exposure, for droplet diameter larger than 3 μm, the shield efficiency in blocking cough droplets was found to be comparable to that of regular surgical masks, with enhanced protection for portions of the face that the mask does not cover. Additionally, for finer particles, down to 0.3 µm diameter, a shield blocked about 10 times more fine particles than the surgical mask. When exposure from the side was considered, the performance of the shield was found to depend dramatically on its geometry. While a narrow shield allowed more droplets and aerosol to penetrate in comparison to a mask under the same configuration, a slightly wider shield significantly improved the performance. The source control potential of shields was also investigated. A shield, and alternatively, a surgical mask, were placed on the cough simulator, while the breathing simulator, situated 60 cm away in the jet direction, remained totally exposed. In both cases, no droplets or particles were found in the vicinity of the breathing simulator. Conducted experiments were limited to short time periods after expiratory events, and do not include longer time ranges associated with exposure to suspended aerosol. Thus, additional evidence regarding the risk posed by floating aerosol is needed to establish practical conclusions regarding actual transmittance reduction potential of face shields and surgical face masks. [ABSTRACT FROM AUTHOR]

During 2001–2002, the National Institute for Occupational Safety and Health (NIOSH), at the United States Centers for Disease Control and Prevention, collaborated with the Bureau of Labor Statistics (BLS) at the United States Department of Labor to conduct a voluntary survey of U.S. employers regarding the use of respiratory protective devices. In 2003, the survey results were jointly published by NIOSH and BLS. This study highlights and evaluates the scientific impact of the 2001–2002 survey by using the Science Impact Framework which provides a historical tracking method with five domains of influence. The authors conducted interviews with original project management as well as a thorough document review and qualitative content analysis of published papers, books, presentations, and other relevant print media. A semi-structured and cross-vetted coding was applied across the five domains: Disseminating Science, Creating Awareness, Catalyzing Action, Effecting Change, and Shaping the Future. The 2001–2002 survey findings greatly enhanced understanding and awareness of respirator use in occupational settings within the United States. It also led to similar surveys in other countries, regulatory initiatives by the Occupational Safety and Health Administration and Mine Safety and Health Administration, and ultimately to a renewed partnership between NIOSH and BLS to collect contemporary estimates of respirator use in the workplace within the United States. [ABSTRACT FROM AUTHOR]

The article reports that authors of “Case Study: Airborne asbestos exposures associated with the installation and removal of roofing products" are withdrawing the paper due to procedural errors which resulted in paper receiving inadequate review prior to publication. It is mentioned that paper should have been submitted as “review" manuscript.

The American Iron and Steel Institute (AISI) gathered data between 1989 and 1997 to build an "objective database" to further understand the occupational exposures generated by the few asbestos-containing materials remaining at various steelmaking companies at this time. This paper analyzed the 520 samples from this campaign which occurred at five different steel manufacturers: Georgetown Steel Company, Inland Steel Company, Ling-Temco-Vought (LTV) Corporation, United States Steel Corporation, and Weirton Steel Corporation. This database is believed to have never previously been systematically organized. Samples were grouped based on sampling times to determine whether they should most appropriately be compared to the OSHA short-term excursion limit (EL) or the 8-hr time-weighted average (TWA) permissible exposure limit (PEL). Sampling times of 30 min or less were considered short-term samples, and samples of 180 min or greater were considered representative workday samples. Samples that did not fit into either category, with sampling times between 31 and 179 min, were considered task samples. Overall, the data indicated that the airborne concentrations were quite low in 1989 and they continued to be low through the study period which ended in 1997. Only seven out of 286 (approximately 2.5%) short-term or representative workday samples were in exceedance of the current OSHA OELs that were implemented in 1994 (short-term samples being compared to the 1 f/cc EL and representative workday samples being compared to the 0.1 f/cc 8-hr TWA PEL). Consistent with prior data, analysis of this dataset supports the view that materials containing asbestos were not used in many applications in the steel industry, and measured airborne concentrations of asbestos were almost always below the occupational exposure limits (OELs) in the post-OSHA era (1972–2000). [ABSTRACT FROM AUTHOR]

Last responders constitute an occupational category that includes all those who are involved in the postmortem care of deceased persons and their families. The work of last responders is often considered "dirty work" and, as a result, stigmatized. Last responders are aware of this stigma, and stigma consciousness has been associated with negative health outcomes. Despite the wide acknowledgment of stigma among last responders, specific risk, or protective factors for experiencing stigma have not been investigated. This paper aims to identify determinants of stigma among last responders in the United States. The data for this study were obtained from a national cross-sectional survey of last responders. The survey included a measure of stigma and multiple sociodemographic characteristics. A hurdle model was used to assess the association between the characteristics of last responders and their perceived stigma. Respondents were predominantly male (55.1%), White non-Hispanic (90.2%), and employed full-time (96%). Seventy-seven percent reported having experienced at least one form of occupation-related stigma. There was no significant association between the experience of stigma and any socio-demographic variables. The experience of stigma is nearly ubiquitous among last responders—>75% of last responders in the sample experienced at least one form of stigma. Another aspect of its ubiquitous nature is the lack of evidence that stigma was experienced differentially across sex, race/ethnicity, employment type, and length of years as a last responder. Interventions are needed to decrease stigma among last responders and to support last responders in managing the consequences of the stigma they experience. [ABSTRACT FROM AUTHOR]

California's Office of Environmental Health Hazard Assessment has updated the comprehensive age-specific model of lead metabolism in humans published by Richard W. Leggett in 1993. The updated model, called Leggett+, was introduced in a peer-reviewed report in 2013. The Leggett + model simulates the relationship between blood lead and exposure in the workplace. Leggett + includes a workplace exposure model comprising respiratory tract intake (workplace lead inhaled by a worker) and uptake (lead absorbed into the blood from the respiratory tract plus uptake from ambient air and diet). The latter is calculated as intake times an inhalation transfer coefficient plus background uptake. An adjusted adult systemic model describes the metabolism of the absorbed lead. This paper provides details about the workplace exposure and uptake elements of Leggett+, an updated approach to calibrating an inhalation transfer coefficient, confirmation of the model's performance in predicting blood lead levels from workplace studies, and predictions of blood lead levels from simulated exposures to workplace airborne lead over a working lifetime. Blood lead relative to airborne lead concentrations in a standard workplace scenario predicted by Leggett + was similar to corresponding relationships from four published workplace studies. Leggett + predictions displayed a good fit to regression equations when other key factors were considered such as pre-employment blood lead and ongoing background intake of lead, workplace air concentration, lead aerosol characteristics, and worker activity levels. The comprehensive Leggett + model can simulate plausible workplace air–blood lead relationships from a broad range of worker exposures. The inhalation transfer coefficient of 0.30, derived from empirical data described in the 2013 report has been reexamined. The original estimate continues to represent a plausible mid-point for a coefficient derived from an expanded range of theoretical particle size distributions deposited in the upper and lower regions of the respiratory tract considering intake during sedentary and outdoor activity breathing scenarios. This coefficient is slightly lower than the value of 0.35 estimated for unknown forms of lead by Leggett in 1993. [ABSTRACT FROM AUTHOR]

The Pugwash Conferences have been a highly visible attempt to create profoundly important discussions on matters related to global safety and security at the highest levels, starting in 1957 at the height of the Cold War. This paper assesses, for the first time, the formal comments offered at this first Pugwash Conference by the Nobel Prize-winning radiation geneticist, Hermann J. Muller, on the effects of ionizing radiation on the human genome. This analysis shows that the presentation by Muller was highly biased and contained scientific errors and misrepresentations of the scientific record that resulted in seriously misleading the attendees. The presentation of Muller at Pugwash served to promote, on a very visible global scale, continued misrepresentations of the state of the science and had a significant impact on policies and practices internationally and both scientific and personal belief systems concerning the effects of low dose radiation on human health. These misrepresentations would come to affect the adoption and use of nuclear technologies and the science of radiological and chemical carcinogen health risk assessment, ultimately having a profound effect on global environmental health. [ABSTRACT FROM AUTHOR]

This paper presents experimental data on the skin absorption of sodium fluoroacetate from a formulated product using an in vitro approach and human skin. Sodium fluoroacetate is a pesticide, typically applied in formulation (1080) for the control of unwanted vertebrate invasive species. It has been assigned a Skin Notation by the ACGIH, and other international workplace health regulatory bodies, due to its predicted ability to permeate intact and abraded human skin. However, there is a distinct lack of experimental data on the skin absorption of sodium fluoroacetate to support this assignment. This study found that sodium fluoroacetate, as a formulated product, permeated the human epidermis when in direct contact for greater than 10 hr. A steady-state flux (Jss) of 1.31 ± 0.043 mg/cm2/hr and a lag time of 6.1 hr was calculated from cumulative skin permeation data. This study provides important empirical evidence in support of the assignment of a Skin Notation. [ABSTRACT FROM AUTHOR]

A company COVID-19 Heating, Ventilation, and Air Conditioning Guideline was implemented globally, as part of a larger control measure toolset, to minimize the potential for SARS-CoV-2 aerosol transmission. The COVID-19 Heating, Ventilation, and Air Conditioning Guideline informed and provided the process to optimize existing ventilation systems, set occupancy duration limits, and set clearance periods for a given space. Aerosol transmission modeling was used extensively to determine space limitations to reduce the potential for aerosol transmission in various manufacturing, lab, warehouse, aircraft, and administrative workspaces. This paper focuses on the modeling completed for administrative spaces (e.g., offices, conference rooms, restrooms, elevators) due to their lower ventilation rates, higher occupant densities, and greater vocalization levels. A detailed description of how the Guideline was implemented, with examples showing the evaluation and determinations made for specific spaces, is provided. World-wide implementation of this Guideline, as one of the layers of protection, was a key component in the overall strategy to reduce aerosol transmission of the SARS-CoV-2 virus. [ABSTRACT FROM AUTHOR]

Ventilation plays an important role in mitigating the risk of airborne virus transmission in university classrooms. During the early phase of the COVID-19 pandemic, methods to assess classrooms for ventilation adequacy were needed. The aim of this paper was to compare the adequacy of classroom ventilation determined through an easily accessible, simple, quantitative measure of air changes per hour (ACH) to that determined through qualitative "expert judgment" and recommendations from the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), and the American Conference of Governmental Industrial Hygienists (ACGIH)®. Two experts, ventilation engineers from facilities maintenance, qualitatively ranked buildings with classrooms on campus with regard to having "acceptable classroom ventilation." Twelve lecture classrooms were selected for further testing, including a mix of perceived adequate/inadequate ventilation. Total air change per hour (ACH) was measured to quantitatively assess ventilation through the decay of carbon dioxide in the front and rear of these classrooms. The outdoor ACH was calculated by multiplying the total ACH by the outdoor air fraction. The classrooms in a building designed to the highest ASHRAE standards (62.1 2004) did not meet ACGIH COVID-19 recommendations. Four of the classrooms met the ASHRAE criteria. However, a classroom that was anticipated to fail based on expert knowledge met the ASHRAE and ACGIH criteria. Only two classrooms passed stringent ACGIH recommendations (outdoor ACH > 6). None of the classrooms that passed ACGIH criteria were originally expected to pass. There was no significant difference in ACH measured in the front and back of classrooms, suggesting that all classrooms were well mixed with no dead zones. From these results, schools should assess classroom ventilation considering a combination of classroom design criteria, expert knowledge, and ACH measurements. [ABSTRACT FROM AUTHOR]

The objective of this paper was to estimate the inter-rater reliability of expert assessments of occupational exposures. An inter-rater reliability sub-study was conducted within a population-based case-control study of postmenopausal breast cancer. Detailed information on lifetime occupational histories was obtained from participants and two industrial hygienists assigned exposures to 185 jobs using a checklist of 293 agents. Experts rated exposure for each job–agent combination according to exposure status (unexposed/exposed), confidence that the exposure occurred (possible/probable/definite), intensity (low/medium/high), and frequency (% time per week). The statistical unit of observation was each job–agent assessment (185 jobs × 293 agents = 54,205 assessments per expert). Crude agreement, Gwet AC1/2 statistics, and Cohen's Kappa were used to estimate inter-rater agreement for confidence and intensity; for frequency, the intra-class correlation coefficient (ICC) was used. The majority of job–agent combinations were evaluated by the two experts to be not exposed (crude agreement >98% of decisions). The degree of agreement between the experts for the confidence of exposure status was Gwet AC1/2 = 0.99 (95% CI: 0.99–0.99), and for intensity, a Gwet AC2 = 0.99 (95% CI: 0.99–0.99). For frequency, an ICC of 0.31 (95% CI: 0.26–0.35) was found. A sub-analysis restricted to job–agent combinations for which the two experts agreed on exposure status revealed a moderate agreement for confidence of exposure (Gwet AC2 = 0.66) and high agreement for intensity (Gwet AC2 = 0.96). For frequency, the ICC was 0.52 (95% CI: 0.47–0.57). A high level of inter-rater agreement was found for identifying exposures and for coding intensity, but agreement was lower for the coding of frequency of exposure. [ABSTRACT FROM AUTHOR]

Filtering facepiece respirators (FFRs) are commonly worn by first responders, first receivers, and other exposed groups to protect against exposure to airborne particles, including those originated by combustion. Most of these FFRs are NIOSH-certified (e.g., N95-type) based on the performance testing of their filters against charge-equilibrated aerosol challenges, e.g., NaCl. However, it has not been examined if the filtration data obtained with the NaCl-challenged FFR filters adequately represent the protection against real aerosol hazards such as combustion particles. A filter sample of N95 FFR mounted on a specially designed holder was challenged with NaCl particles and three combustion aerosols generated in a test chamber by burning wood, paper, and plastic. The concentrations upstream (Cup) and downstream (Cdown) of the filter were measured with a TSI P-Trak condensation particle counter and a Grimm Nanocheck particle spectrometer. Penetration was determined as (Cdown/Cup) ×100%. Four test conditions were chosen to represent inhalation flows of 15, 30, 55, and 85 L/min. Results showed that the penetration values of combustion particles were significantly higher than those of the “model” NaCl particles (p < 0.05), raising a concern about applicability of the N95 filters performance obtained with the NaCl aerosol challenge to protection against combustion particles. Aerosol type, inhalation flow rate and particle size were significant (p < 0.05) factors affecting the performance of the N95 FFR filter. In contrast to N95 filters, the penetration of combustion particles through R95 and P95 FFR filters (were tested in addition to N95) were not significantly higher than that obtained with NaCl particles. The findings were attributed to several effects, including the degradation of an N95 filter due to hydrophobic organic components generated into the air by combustion. Their interaction with fibers is anticipated to be similar to those involving “oily” particles. The findings of this study suggest that the efficiency of N95 respirator filters obtained with the NaCl aerosol challenge may not accurately predict (and rather overestimate) the filter efficiency against combustion particles. [ABSTRACT FROM AUTHOR]

SARS-CoV-2 and other microbes within aerosol particles can be partially shielded from UV radiation. The particles refract and absorb light, and thereby reduce the UV intensity at various locations within the particle. Previously, we demonstrated shielding in calculations of UV intensities within spherical approximations of SARS-CoV-2 virions within spherical particles approximating dried-to-equilibrium respiratory fluids. The purpose of this paper is to extend that work to survival fractions of virions (i.e., fractions of virions that can infect cells) within spherical particles approximating dried respiratory fluids, and to investigate the implications of these calculations for using UV light for disinfection. The particles may be on a surface or in air. Here, the survival fraction (S) of a set of individual virions illuminated with a UV fluence (F, in J/m2) is assumed described by S(kF) = exp(-kF), where k is the UV inactivation rate constant (m2/J). The average survival fraction (Sp) of the simulated virions in a group of particles is calculated using the energy absorbed by each virion in the particles. The results show that virions within particles of dried respiratory fluids can have larger Sp than do individual virions. For individual virions, and virions within 1-, 5-, and 9-µm particles illuminated (normal incidence) on a surface with 260-nm UV light, the Sp = 0.00005, 0.0155, 0.22, and 0.28, respectively, when kF = 10. The Sp decrease to <10−7, <10−7, 0.077, and 0.15, respectively, for kF = 100. Results also show that illuminating particles with UV beams from widely separated directions can strongly reduce the Sp. These results suggest that the size distributions and optical properties of the dried particles of virion-containing respiratory fluids are likely important to effectively designing and using UV germicidal irradiation systems for microbes in particles. The results suggest the use of reflective surfaces to increase the angles of illumination and decrease the Sp. The results suggest the need for measurements of the Sp of SARS-CoV-2 in particles having compositions and sizes relevant to the modes of disease transmission. [ABSTRACT FROM AUTHOR]

In the decade since the last published comprehensive report of occupational exposures in the glass wool insulation industry, many process and regulatory changes have occurred in the glass wool manufacturing sector. This paper assesses whether any significant changes in worker exposures to glass wool fibers have resulted from these process and regulatory changes. The analysis compares worker exposures to glass wool overall and across different product and job categories in the manufacturing sector prior to and after 2007, the data cutoff period for the last comprehensive update of occupational exposures in this industry. The exposure data were downloaded from the North American Insulation Manufacturers Association's synthetic vitreous fiber (SVF) exposure database, which has been continually updated with all new available SVF exposure data for the past two decades. This analysis finds no major changes in worker exposures in the glass wool manufacturing industry over the past decade, with exposures remaining well below the 1 f/cc voluntary permissible exposure limit. [ABSTRACT FROM AUTHOR]

Carbon nanotubes (CNTs) are cylindrical molecules of carbon with diverse commercial applications. CNTs are also lightweight, easily airborne, and have been shown to be released during various phases of production and use. Therefore, as global CNT production increases, so do concerns that CNTs could pose a safety threat to those who are exposed to them. This makes it imperative to fully understand CNT release scenarios to make accurate risk assessments and to implement effective control measures. However, the current suite of direct-reading and off-line instrumentation used to monitor the release of CNTs in workplaces lack high chemical specificity, which complicates risk assessments when the sampling and/or measurements are performed at a single site where multiple CNT types are handled in the presence of naturally occurring background particles, or dust. Herein, we demonstrate the utility of Raman spectroscopy to unequivocally identify whether particulate matter collected from a multi-user analytical balance workstation comprised CNTs, as well as, whether the contamination included CNTs that were synthesized by a Ni/Y-catalyzed electric-arc method or a Co/Mo-catalyzed chemical vapor deposition method. Identifying the exact CNT type generated a more accurate risk assessment by knowing the metallic impurities involved, and it also led to the identification of the users who handled these CNTs, a review of their handling techniques, and an improved protocol for safely weighing CNTs. [ABSTRACT FROM PUBLISHER]

Industrial workshops or any other industrial premises where noisy machines are operated should be as acoustically absorbent as possible. On the other hand, acoustic treatments are expensive (especially when correcting existing premises), messy, and not always compatible with the implemented production processes. Therefore, there is a need for acoustic specifications to find the best compromise between cost and efficiency. In France, for noisy industrial workshops to be compliant, the regulation requires the rate of decay of sound per distance doubling (DL2) to exceed compulsory limit values, unless this does not have a significant impact on workers' exposure to noise. However, that rate of decay is difficult and time consuming to evaluate. The purpose of this paper is to provide recommendations based on reverberation time (RT), which is not only easier to measure but is also widely used. The D2L values are conventionally measured in industrial workshops together with RT values and thus a database compiling both RT and DL2 values was available. It has been used to draw up reference limits for RT values consistent with the DL2 regulation limits. These reference limits were validated by comparison with the literature and with a new set of data collected specially for the purposes of performing that comparison. The final limits are divided into four categories: compliant/non-compliant, for furnished/empty industrial workshops, using a 95/99% confidence interval. They are intended to enable the acoustic treatment of a workshop to be evaluated using a simple metric, either at the design stage or for monitoring or occupational inspection purposes. [ABSTRACT FROM AUTHOR]

The routes of COVID-19 transmission to healthcare personnel from infected patients is the subject of debate, but is critical to the selection of personal protective equipment. The objective of this paper was to explore the contributions of three transmission routes—contact, droplet, and inhalation—to the risk of occupationally acquired COVID-19 infection among healthcare personnel (HCP). The method was quantitative microbial risk assessment, and an exposure model, where possible model parameters were based on data specific to the SARS-CoV-2 virus when available. The key finding was that droplet and inhalation transmission routes predominate over the contact route, contributing 35%, 57%, and 8.2% of the probability of infection, on average, without use of personal protective equipment. On average, 80% of inhalation exposure occurs when HCP are near patients. The relative contribution of droplet and inhalation depends upon the emission of SARS-CoV-2 in respirable particles (<10 µm) through exhaled breath, and inhalation becomes predominant, on average, when emission exceeds five gene copies per min. The predicted concentration of SARS-CoV-2 in the air of the patient room is low (< 1 gene copy per m3 on average), and likely below the limit of quantification for many air sampling methods. The findings demonstrate the value of respiratory protection for HCP, and that field sampling may not be sensitive enough to verify the contribution of SARS-CoV-2 inhalation to the risk of occupationally acquired COVID-19 infection among healthcare personnel. The emission and infectivity of SARS-CoV-2 in respiratory droplets of different sizes is a critical knowledge gap for understanding and controlling COVID-19 transmission. [ABSTRACT FROM AUTHOR]

The duties of home healthcare workers are extensive. One important task that is frequently performed by home healthcare workers is administration of nebulized medications, which may lead to significant dermal exposure. In this simulation study conducted in an aerosol exposure chamber, we administered a surrogate of nebulizer-delivered medications (dispersed sodium chloride, NaCl) to a patient mannequin. We measured the amount of NaCl deposited on the exposed surface of the home healthcare worker mannequin, which represented the exposed skin of a home healthcare worker. Factors such as distance and position of the home healthcare worker, room airflow rate and patient's inspiratory rate were varied to determine their effects on dermal exposure. There was a 2.78% reduction in dermal deposition for every centimeter the home healthcare worker moved away from the patient. Increasing the room's air exchange rate by one air change per hour increased dermal deposition by about 2.93%, possibly due to a decrease in near field particle settling. For every 10-degrees of arc the home healthcare worker is positioned from the left side of the patient toward the right and thus moving into the ventilation airflow direction, dermal deposition increased by about 4.61%. An increase in the patient's inspiratory rate from 15–30 L/min resulted in an average of 14.06% reduction in dermal deposition for the home healthcare worker, reflecting a relative increase in the aerosol fraction inhaled by the patient. The findings of this study elucidate the interactions among factors that contribute to dermal exposure to aerosolized pharmaceuticals administered by home healthcare workers. The results presented in this paper will help develop recommendations on mitigating the health risks related to dermal exposure of home healthcare workers. [ABSTRACT FROM AUTHOR]

The exposure prediction component of the Control of Substances Hazardous to Health (COSHH) Essentials model (paper version) was evaluated using field measurements from National Institute of Occupational Safety and Health (NIOSH) Health Hazard Evaluation (HHE) reports. Overall 757 measured exposures for 94 similar exposure groups (SEGs) were compared with the COSHH Essentials predicted exposure range (PER). The SEGs were stratified based on the magnitude of measured exposures (high, medium, or low) and physical state of the substance (vapor or particulate). The majority of measured exposures observed involved low-level exposure to vapors; thus, overall findings from the current study are limited to low-level vapor exposure scenarios. Overall, the exposure prediction component of COSHH Essentials vastly overestimated low-level exposures to vapors. This study went beyond the scope of previous studies and investigated which model components led to the overestimation. It was concluded that COSHH Essential's tendency to overestimate was due to multiple complex interactions among model components. Overall, the magnitude of overestimation seems to increase exponentially as values for predictor variables increase. This is likely due to the log-based scale used by the model to allocate concentration ranges. In addition, the current banding scheme used to allocate volatility appears to play a role in the overestimation of low-level exposures to vapors. [ABSTRACT FROM AUTHOR]

The barrier properties of personal protective equipment are vital to healthcare personnel to protect themselves from possible infectious body fluids. Intraoperative exposure of healthcare personnel to body fluids can be substantial in both inpatient and outpatient settings. The glove–gown interface is known as one of the weakest points of the whole personal protective equipment system. However, there is a lack of scientific research designed to investigate the problem. This paper reports the results of experiments using a new testing methodology developed to quantify fluid leakage through the glove–gown interface while simulating surgical settings in terms of operating room personnel activities, exposure types, exposure durations, and physical stresses applied on the interface. This study represents one of the first efforts investigating the amount of fluid leakage through the glove–gown interface for a number of surgical gown and glove models while considering glove material differences and single vs. double gloving. The test results showed that there is a significant difference in fluid leakage amounts between three gown models and four glove models studied. The results also demonstrated that double gloving significantly reduced the fluid leakage compared to single glove use. The mean fluid leakage was lower in the double synthetic glove configurations (M = 2.76g) compared with all other configurations (3GLV, M = 8.3g; 4GLV, M = 9.49g; 5GLV, M = 3.08g; 6GLV, M = 20.03g; double latex, M = 5.22g). Findings highlighted a significant interaction between glove and gown designs, which suggests that gown and gloves should be designed together as a system to minimize or eliminate the fluid leakage. [ABSTRACT FROM AUTHOR]

The professional work of small animal veterinary staff encompasses a wide diversity of demanding tasks. This has prompted a number of studies covering physical, chemical, biological, ergonomic, or psychological hazards, as well as their health effects upon veterinary workers. However, such results were obtained from self-reported surveys (via paper or online). This study reports the identification of potential hazards and provides a risk assessment of 15 veterinary clinics based on data from walk-through surveys, interviews with workers, and quantification of indoor air quality parameters including concentration of volatile organic compounds (total, isoflurane, and glutaraldehyde). The risk arising from X-ray exposure was unacceptable in seven clinics; X-ray examination should be discontinued in the absence of isolated radiation rooms, poor safety practices, and lack of personal protective equipment. Ergonomic-related hazards and work practices should be revised as soon as possible, considering that improper postures, as well as moving and lifting heavy animals are major causes of musculoskeletal disorders. The risk levels were, in general, small or medium (acceptable) with regard to exposure to physical hazards (such as bites, scratches, cuts, and burns) and biological hazards. It was observed that the indoor air quality parameters including temperature, respirable particulate matter and total volatile organic compounds do not indicate a comfortable workplace environment, requiring clinics' attention to keep the safe environment. The veterinarians and nurses were exposed to isoflurane (above 2 ppm) during surgery if an extractor system for waste gas was used instead of a scavenging system. Finally, veterinary workers did not possess any type of training on occupational safety and health issues, even though they recognized its importance. [ABSTRACT FROM AUTHOR]

Filtering Facepiece Respirator (FFR) is the most common respirator users in the health care environment utilize for personal protection from outside particles. Comfort and fit are important while wearing an FFR. This paper proposes a novel technology to produce customized face seal design for improving the wearing comfort and fit of FFR wearers. In order to customize the design of face seals, we scanned the faces of three subjects using three-dimensional (3D) laser scanning method. A customized face seal for a 3M 8210 N95 FFR for each headform was designed using reverse engineering technique. Next, the face seal prototypes were fabricated with Acrylonitrile Butadiene Styrene (ABS) plastic using the 3D printing method. A force sensing system based on Arduino Uno R3 was developed, and the force sensor of this system was inserted between the FFR and headform to measure contact pressure. Experimental results showed that the newly designed FFR face seal provided the subjects with an improved contact pressure. [ABSTRACT FROM AUTHOR]

The differences in permeation parameters when a gloved dextrous robot hand clenched and did not were investigated with the dynamic permeation system described in the companion paper. Increased permeation through the gloves of the present study for cyclohexanol when the gloved hand clenched depended on glove thickness and porosity for cyclohexanol permeation. The Sterling glove, the thinnest and most porous, was the least protective. Hand clenching promoted more permeation for the Sterling glove in terms of breakthrough times, steady state permeation rate, and diffusion coefficient. The Safeskin glove showed increased permeation only for the steady state permeation rate but not breakthrough times or diffusion coefficient. The Blue and Purple gloves showed no differences when the hand was clenching or not. The correlational analysis supported differences between the clenching and non-clenching situations, and the risk assessment considered the worst and best scenarios relative to one and two hydrated hands that were and were not protected by specific gloves. [ABSTRACT FROM AUTHOR]

Work in confined spaces poses a significant risk to workers and rescuers involved in the emergency response when an accident occurs. Despite several standards and regulations define the safety requirements for such activities, injuries, and fatalities still occur. Furthermore, the on-site inspections after accidents often reveal that both employers and employees fail to implement safe entry procedures. Removing the risk is possible by avoiding the worker entry, but many activities require the presence of the operator inside the confined space to perform manual tasks. The following study investigates the available technologies for hazardous confined space work activities, e.g., cleaning, inspecting, and maintenance tasks. The aim is to provide a systematic review of the automated solutions for high-risk activities in confined spaces, considering the non-man entry as the most effective confined space safety strategy. Second, this survey aims to provide suggestions for future research addressing the design of new technologies. The survey consists of about 60 papers concerning innovative technologies for confined space work activities. The document review shows that several solutions have been developed and automation can replace the workers for a limited number of hazardous tasks. Several activities still require the manual intervention due to the complex characteristics of confined spaces, e.g., to remove the remains of the automatic cleaning process from the bottom of a tank. The results show that available technologies require more flexibility to adapt to such occupational environments and further research is needed. [ABSTRACT FROM AUTHOR]

An editorial is presented on conducting integrated industrial hygiene sampling. Topics include transition to low-cost sensors and the Internet-of-Things obtaining real-time concentration information, with programmed feedback providing management; and barriers to adoption, best-use practices, and data algorithms for big data decision-making.

Carbon dioxide (CO2) makes up a relatively small percentage of atmospheric gases, yet when used or produced in large quantities as a gas, a liquid, or a solid (dry ice), substantial airborne exposures may occur. Exposure to elevated CO2concentrations may elicit toxicity, even with oxygen concentrations that are not considered dangerous per se. Full-shift sampling approaches to measure 8-hr time weighted average (TWA) CO2exposures are used in many facilities where CO2gas may be present. The need to assess rapidly fluctuating CO2levels that may approach immediately dangerous to life or health (IDLH) conditions should also be a concern, and several methods for doing so using fast responding measurement tools are discussed in this paper. Colorimetric detector tubes, a non-dispersive infrared (NDIR) detector, and a portable Fourier transform infrared (FTIR) spectroscopy instrument were evaluated in a laboratory environment using a flow-through standard generation system and were found to provide suitable accuracy and precision for assessing rapid fluctuations in CO2concentration, with a possible effect related to humidity noted only for the detector tubes. These tools were used in the field to select locations and times for grab sampling and personal full-shift sampling, which provided laboratory analysis data to confirm IDLH conditions and 8-hr TWA exposure information. Fluctuating CO2exposures are exemplified through field work results from several workplaces. In a brewery, brief CO2exposures above the IDLH value occurred when large volumes of CO2-containing liquid were released for disposal, but 8-hr TWA exposures were not found to exceed the permissible level. In a frozen food production facility nearly constant exposure to CO2concentrations above the permissible 8-hr TWA value were seen, as well as brief exposures above the IDLH concentration which were associated with specific tasks where liquid CO2was used. In a poultry processing facility the use of dry ice to quickly freeze product produced a nearly constant CO2concentration that caused exposures to approach the permissible 8-hr TWA exposure value. [ABSTRACT FROM AUTHOR]

This article outlines a hierarchy of data required for retrospective exposure assessment for occupational disease of an individual worker. It then outlines in a step-wise manner how trend analysis using a relatively large exposure database can be used to estimate such exposure. The process of how a large database containing exposure measurements can be prepared for estimating historic occupational exposures of individual workers in relation to their illnesses is described. The asbestos subset from a large government collected air monitoring database called Medical Surveillance (MESU) was selected to illustrate the cleaning and analysis processes. After unidentifiable values were removed, the cleaned dataset was examined for possible sources of variability such as changes to sampling protocol. Limit of detection (LOD) values were substituted for all non-detectable values prior to the calculation of descriptive statistic using left censored analysis methods (i.e., maximum likelihood estimation (MLE), Kaplan Meier (KM), and simple substitution). The JoinPoint Regression Program was used to perform trend analysis and calculate an annual percentage change (APC) value for the available sampling period. An asbestos case study is presented to illustrate how the APC can then be combined with more recent job and/or process specific exposure data to estimate historic levels. The MESU asbestos dataset contained 1,610 samples from 1984–1995. An average of 17% of this data was left censored. The asbestos air sampling methods in Ontario changed around 1990. LOD values of 0.06 f/cc and 0.02 f/cc were substituted for LOD values pre- and post-1990, respectively. The annual mean fiber levels for the MLE method were an average of 44% lower than KM and substitution methods. The corresponding APC for MLE method was −6.5% and −7.7% for KM and simple substitution. The findings of this paper illustrate how the temporal trend of an exposure databases can be used to efficiently estimate historic contaminant levels in the presence of limited historical information. [ABSTRACT FROM AUTHOR]

The outbreak of the COVID-19 pandemic is causing a shortage of personal protective equipment (PPE) across the world. As a public health response to control the pandemic, wearing homemade face coverings has been proven as a resort to protect both the wearer and others from droplets and aerosols transmission. Although aerosols and droplets can be removed through these non-medical materials with a series of filtration mechanisms, their filtration performances have not been evaluated in detail. Moreover, many factors, such as the fabric properties and the method of usage, also affect filtration performance. In this study, the size-dependent filtration performances of non-medical materials as candidates for face coverings were evaluated comprehensively. The flow resistance across these filter materials, an indicator of breathability, was also examined. The effect of materials properties, washing and drying cycles, and triboelectric effect on particle filtration was also studied. Results showed that the filtration efficiency varied considerably from 5–50% among fabrics materials due to the material properties, such as density and microscopic structure of the materials. Microfiber cloth demonstrated the highest efficiency among the tested materials. In general, fabric materials with higher grams per square meter (GSM) show higher particle filtration efficiency. The results on washing and drying fabric materials indicated decent reusability for fabric materials. The triboelectric charge could increase the filtration performance of the tested fabric materials, but this effect diminishes soon due to the dissipation of charges, meaning that triboelectric charging may not be effective in manufacturing homemade face coverings. [ABSTRACT FROM AUTHOR]

Silicosis is one of the major occupational lung diseases among stone miners; currently, it is a major concern in India given its 12–30% prevalence. The objective of this study was to determine the exposure profile of respirable dust and crystalline silica concentrations from sandstone, masonry stone, and granite stone mines in India. Personal respirable dust samples were collected from each type of mine and analyzed for dust and respirable crystalline silica concentrations. The mean dust concentrations were found to be 0.47 mg/m3, 1.24 mg/m3, and 3.28 mg/m3 for sandstone, masonry stone, and granite stone mines, respectively. The mean respirable crystalline silica concentrations were 0.12 mg/m3 for sandstone mines and 0.17 mg/m3 for masonry stone and granite stone mines. The concentrations in sandstone mines was below the standard stipulated by the Directorate General of Mine Safety in India (0.15 mg/m3), whereas in the granite and masonry mines the concentrations just exceeded the limit. The Indian standard for respirable crystalline silica is three to six times higher than the standard set elsewhere (i.e., by OSHA, ACGIH®, and Egyptian Labor Law standards). Considering the large number of silicosis cases among stone miners in India, the present standard appears inadequate. It is recommended that the standard be lowered to match international standards that minimize the risk of silicosis. [ABSTRACT FROM AUTHOR]

An editorial is presented on industrial hygienists and allied professionals providing critical insights into steps for minimizing the spread of the SARS-CoV-2 virus. Topics include highlighting the need for understanding and improving ventilation for increasing fresh air exchange into occupied spaces; and assessing ventilation performance, aerosol transport studies in workspaces, and flow studies around plexiglass barriers in the workplace.

Cleaning workers are exposed to many risk factors, including handling of cleaning products. Epidemiological studies show that they have a high incidence of asthma and other respiratory symptoms. Some studies have indicated an even higher incidence of asthma in individuals using cleaning sprays regularly. It is known that sprays produce an aerosol that can expose the respiratory system to chemicals. Knowledge of the physical characteristics of the airborne particles, as well as the characteristics of the gas phase, is needed to determine how they affect the respiratory tract and why they cause airway symptoms. The aim of this study was to characterize the aerosols from seven different ready-to-use trigger cleaning sprays in terms of total airborne mass fraction, particle size distribution, and new particle formation from ozone reactions. An additional aim was to calculate the respiratory deposition fraction of the measured particles. The total airborne mass fraction was determined by comparing the mass deposited on the chamber wall with the mass emitted from the bottle during spraying. Particle number concentration and size distribution of the airborne particles were measured using an aerodynamic particle sizer and a fast aerosol mobility size spectrometer. The total airborne mass fraction was between 2.7% and 32.2% of the mass emitted from the bottle, depending on the product. Between 0.0001% and 0.01% of the total airborne mass fraction consisted of residual particles. However, these particles had a mass median aerodynamic diameter between 1.9 µm and 3.7 µm, constituting a total respiratory deposition of up to 77%. New particle formation in the presence of ozone was also shown to vary between 5,000 cm−3 and 35,000 cm−3 depending on the product, in the studied settings. These findings confirm that a substantial part (up to 1/3) of the mass sprayed from the bottle does not reach the intended surface. Thus, the use of cleaning sprays can result in chemical airway exposure, with particles in the relevant size range for both nasal and alveolar deposition. [ABSTRACT FROM AUTHOR]

Asian and Asian Americans (A/AA) are a group overlooked in general health outcomes but especially occupational safety and health outcomes. In the United States, the beauty service microbusiness industry (e.g., nail salons) predominantly employs immigrant Asian women who regularly encounter a plethora of occupational hazards (e.g., harmful chemical exposures -toluene, formaldehyde, bloodborne pathogens, fungi. However, due to the precariousness of beauty service jobs, cultural and linguistic barriers, and social determinants of health, A/AA beauty service workers face complex occupational safety and health challenges that require interdisciplinary collaboration and cultural competency to address. This commentary will discuss a multi-level approach including specific outreach partners that will offer the required diverse skillsets necessary for improving the occupational safety and health for this worker population in this microbusiness industry. Implications and suggestions for interventions and policy changes are also recommended utilizing the National Institute on Minority Health and Health Disparities' Research Framework. [ABSTRACT FROM AUTHOR]

Occupational exposure to ototoxicants, substances that can cause hearing loss alone or exacerbate hearing loss when exposure occurs in combination with noise, is a workplace hazard that is poorly understood. A review of existing research indicates that some solvents and heavy metals may be ototoxic, but few studies have attempted to estimate the impact of ototoxicant exposure on the United States worker population. Researchers examined trends in workplace exposure to ototoxicants among workers in the United States by comparing exposure data collected by the Occupational Safety and Health Administration against worker hearing loss data provided by the Bureau of Labor Statistics (BLS) for 2012–2019. The study found that the noise exposure data was strongly correlated to the hearing loss data using Pearson's correlation (p <.001), confirming that the exposure data collected by OSHA is predictive of the risk of occupational illness as reported by BLS. Chi-square analysis indicates that reported hearing loss was more common among industry subsectors with exposure to ototoxicants than those without exposure to ototoxicants. These findings suggest that workers with coexposure to ototoxicants and noise may be at a higher risk of experiencing hearing loss than those exposed to noise alone, and action should be taken to minimize this risk. [ABSTRACT FROM AUTHOR]

Filtering facepieces (FFP), mainly class FFP2 particle half masks (EN 149:2001#x02009;+ A1:2009), are commonly used in European mines to protect workers from respirable dust, especially from particulate matter (PM) with a diameter of 4 µm or less (PM4). The aerosol associated with diesel exhaust (DE) is dominated by submicrometer particles (with a diameter of less than 1 µm) and nanoparticles (size in the range between 10 and 500 nm). In the European Union (EU), the occupational exposure level (OEL) for DE has been defined in terms of elemental carbon (EC) concentration. Based on measurements in underground mines, on average, 60% of EC associated with PM4 was contained in PM with a diameter of 1 µm or less (PM1). Particle number size distribution (PNSD) of PM1 showed that the most numerous were particles in the size range of 20 to 300 nm. Four popular types of certified FFP2 half masks were tested for penetration. Brand new and thermally conditioned masks of each type were included in the study. NaCl aerosol in the particle size range of 7 to 270 nm was used for tests. Filtration efficiencies of 98.5% (median) or higher were achieved. Aerosol penetration was a function of particle size. Maximum penetration was observed between 20 and 60 nm, depending on the type of mask. During filtration, aerosol characteristics changed. Nanoparticles ranging in size from 7 to about 60 nm were removed to a very limited extent. The change was more noticeable for brand-new masks compared to the thermally conditioned ones. Usually, aerosol penetration through thermally conditioned masks was lower and more consistent. It was confirmed that the half masks of the FFP2 class are capable of filtering submicrometer aerosol in particle size range 7 to 270 nm with an efficiency exceeding 96% and can contribute to achieving compliance with the OEL for DE in the mining sector. [ABSTRACT FROM AUTHOR]

COVID-19 has had a devastating impact worldwide, including in care homes where there have been substantial numbers of cases among a very vulnerable population. A key mechanism for managing exposure to the virus and targeting interventions is contact tracing. Unfortunately, environments such as care homes that were most catastrophically impacted by COVID-19 are also those least amenable to traditional contact tracing. A promising alternative to recall and smartphone-based contact tracing approaches is the use of discrete wearable devices that exploit Bluetooth Low Energy (BLE) and Long-Range Wide Area Network (LoRaWAN) technologies. However, the real-world performance of these devices in the context of contact tracing is uncertain. A series of experiments were conducted to evaluate the performance of a wearables system that is based on BLE and LoRaWAN technologies. In each experiment, the number of successful contacts was recorded and the physical distance between two contacts was compared to a calculated distance using the Received Signal Strength Indication (RSSI) to determine the precision, error rate, and duration of proximity. The overall average system contact detection success rate was measured as 75.5%; when wearables were used as per the manufacturer's guidelines the contact detection success rate increased to 81.5%, but when obstructed by everyday objects such as clothing or inside a bag the contact detection success rate was only 64.2%. The calculated distance using RSSI was close to the physical distance in the absence of obstacles. However, in the presence of typical obstacles found in care home settings, the reliability of detection decreased, and the calculated distance usually appeared far from the actual contact point. The results suggest that under real-world conditions there may be a large proportion of contacts that are underestimated or undetected. [ABSTRACT FROM AUTHOR]

Asbestos is a mineral that is carcinogenic to humans. Its use has been banned in many occidental countries yet it is still produced in the United States, and materials that contain asbestos remain in many occupational settings and indoor environments. Even though asbestos carcinogenicity is well known, there is scant literature on its specific effects regarding small cell lung cancer (SCLC). We therefore conducted a systematic review and meta-analysis to determine SCLC risk among workers exposed to asbestos. A systematic search of the literature was conducted to identify studies which reported occupational exposure to asbestos and SCLC-related deaths and/or incidence. We identified seven case-control studies that included 3,231 SCLC cases; four studies reported smoking-adjusted risks. A significantly increased risk of SCLC (pooled OR 1.89; 95% CI, 1.25–2.86) was observed on pooling studies on men (six studies) that displayed moderate heterogeneity (I2 = 46.0%). Overall, our synthesis suggests that occupational exposure to asbestos significantly increases the risk of SCLC on men. [ABSTRACT FROM AUTHOR]

Despite efforts to apply administrative and engineering controls to minimize worker exposure to aerosols, filtering facepiece respirators (FFRs) continue to be an important form of personal protective equipment in hard-to-control settings such as healthcare, agriculture, and construction. Optimizing the performance of FFRs can be advanced with the use of mathematical models that incorporate the forces that act on particles during filtration as well as those filter characteristics that influence filter pressure drop. However, a thorough investigation of these forces and characteristics using measurements of currently available FFRs has not been undertaken. Filter characteristics such as fiber diameter and filter depth were measured from samples taken from six currently-available N95 FFRs from three manufacturers. A filtration model was developed that included diffusion, inertial and electrostatic forces to estimate the filtration of an aerosol with a Boltzmann charge distribution. The diameter of the filter fibers was modeled as either a single "effective" diameter or as a lognormal distribution of diameters. Both modeling schemes produced an efficiency curve that simulated efficiency measurements made over a range of particle diameters (0.01 − 0.3 µm) with the use of a scanning mobility particle sizer in the region where efficiency is at a minimum. However, the method using a distribution of fiber diameters produced a better fit for particles > 0.1 µm. The coefficients associated with a simple form of the diffusion equation constituting a power law incorporating the Peclet number were adjusted to enhance model accuracy. Likewise, the fiber charge of the electret fibers was also adjusted to maximize model fit but remained within levels reported by others. A filter pressure drop model was also developed. Results demonstrated the need for a pressure drop model applicable to N95s relative to existing models developed with the use of fibers with larger diameters than those used in current N95 FFRs. A set of N95 FFR characteristics are provided that can be used to develop models of typical N95 FFR filter performance and pressure drop in future studies. [ABSTRACT FROM AUTHOR]

The objective of this review was to scope the current evidence base related to three exposure assessment concepts: frequency, intensity, and duration (latency) for cleaning and disinfection exposures in healthcare and subsequent work-related asthma risks. A search strategy was developed addressing intersections of four main concepts: (1) work-related asthma; (2) occupation (healthcare workers/nurses); (3) cleaning and disinfection; and (4) exposure. Three databases were searched: Embase, PubMed, and the Cumulative Index to Nursing and Allied Health Literature (CINAHL) database. Data were extracted related to three main components of risk assessment: (1) exposure frequency, (2) exposure intensity, and (3) exposure duration. Latency data were analyzed using an exponential distribution fit, and extracted concentration data were compared to occupational exposure limits. The final number of included sources from which data were extracted was 133. Latency periods for occupational asthma were exponentially distributed, with a mean waiting time (1/λ) of 4.55 years. No extracted concentration data were above OELs except for some formaldehyde and glutaraldehyde concentrations. Data from included sources also indicated some evidence for a dose-response relationship regarding increased frequency yielding increased risk, but this relationship is unclear due to potential confounders (differences in role/task and associated exposure) and the healthy worker effect. Data priority needs to include linking concentration data to health outcomes, as most current literature does not include both types of measurements in a single study, leading to uncertainty in dose-response relationships. [ABSTRACT FROM AUTHOR]

In 2022, a confined space entry accident occurred on a Danish product tanker in which two technicians died from hydrogen sulfide poisoning during the inspection of an empty cargo tank that had contained vegetable cooking oil. The source of the hydrogen sulfide was enigmatic. About three weeks before the accident, the cargo tank was prewashed with seawater. The wash water did not seem likely to present a toxic hazard and was left in the tank. However, the seawater's natural content of dissolved sulfate was converted to sulfide by sulfate-reducing bacteria, and the low-sulfur vegetable oil residue provided the nutrients necessary for bacterial growth. Calculations confirm that sulfate in just 10 m3 of plain seawater is sufficient to create an immediately fatal concentration of H2S gas in the 4,500 m3 cargo tank of the product tanker. Accident statistics show that fatal accidents within enclosed spaces are a serious and stubborn problem. Strict adherence to routine forced ventilation and extensive gas testing of cargo tanks before entry would offer simple and effective preventive measures. [ABSTRACT FROM AUTHOR]

Exposure modeling plays a significant role for regulatory organizations, companies, and professionals involved in assessing and managing occupational health risks in workplaces. One context in which occupational exposure models are particularly relevant is the REACH Regulation in the European Union (Regulation (EC) No 1907/2006). This commentary describes the models for the occupational inhalation exposure assessment of chemicals within the REACH framework, their theoretical background, applications, and limitations, as well as the latest developments and priorities for model improvement. Summing up the debate, despite its relevance and importance in the context of REACH not being in question, occupational exposure modeling needs to be improved in many respects. There is a need to reach a wide consensus on several key issues (e.g., the theoretical background and the reliability of modeling tools), to consolidate and monitor model performance and regulatory acceptance, and to align practices and policies regarding exposure modeling. [ABSTRACT FROM AUTHOR]

Loose-fitting powered air-purifying respirators (PAPRs) are used in healthcare settings, although barriers to routine, everyday usage remain, including usability concerns and potential interference with work activities. Loose-fitting PAPRs are approved by the National Institute for Occupational Safety and Health (NIOSH) and must meet minimum performance requirements, including a minimum airflow requirement of 170 L/min. One course of action to address usability concerns is to allow for the use of PAPRs designed with reduced airflow rates. The primary objective of this study was to assess the effect of PAPR flow rate and user work rate on PAPR performance, using a manikin-based assessment method. PAPR performance was quantified using the "Manikin Fit Factor" (mFF), a ratio of the challenge aerosol concentration to the in-facepiece concentration. Flow rates from 50–215 L/min and low, moderate, and high work rates were tested. Two models of NIOSH Approved loose-fitting facepiece PAPRs were tested, both having an Occupational Safety and Health Administration Assigned Protection Factor (APF) or expected level of protection, of 25. A two-way analysis of variance with an effect size model was run for each PAPR model to analyze the effects of work rate and flow rate on PAPR performance. Flow rate and work rate were found to be significant variables impacting PAPR performance. At low and moderate work rates and flow rates below the NIOSH minimum of 170 L/min, mFF was greater than or equal to 250, which is 10 times the OSHA APF of 25 for loose-fitting facepiece PAPRs. At high work rates and flow rates below 170 L/min, mFF was not greater than or equal to 250. These results suggest that some loose-fitting facepiece PAPRs designed with a flow rate lower than the current NIOSH requirement of 170 L/min may provide respirator users with expected protection at low and moderate work rates. However, when used at high work rates, some loose-fitting facepiece PAPRs designed with lower flow rates may not provide the expected level of protection. [ABSTRACT FROM AUTHOR]

Workers, particularly outdoor workers, are among the populations most disproportionately affected by climate-related hazards. However, scientific research and control actions to comprehensively address these hazards are notably absent. To assess this absence, a seven-category framework was developed in 2009 to characterize the scientific literature published from 1988–2008. Using this framework, a second assessment examined the literature published through 2014, and the current one examines literature from 2014–2021. The objectives were to present literature that updates the framework and related topics and increases awareness of the role of climate change in occupational safety and health. In general, there is substantial literature on worker hazards related to ambient temperatures, biological hazards, and extreme weather but less on air pollution, ultraviolet radiation, industrial transitions, and the built environment. There is growing literature on mental health and health equity issues related to climate change, but much more research is needed. The socioeconomic impacts of climate change also require more research. This study illustrates that workers are experiencing increased morbidity and mortality related to climate change. In all areas of climate-related worker risk, including geoengineering, research is needed on the causality and prevalence of hazards, along with surveillance to identify, and interventions for hazard prevention and control. [ABSTRACT FROM AUTHOR]

The goal of this study was to evaluate the relationship between ratings of perceived exertion (RPE) and relative strength with respect to baseline for a fatiguing free dynamic task targeting the upper extremity, namely simulated order picking, and determine whether the relationship remains the same for different conditions (i.e., pace and weight) and with fatigue. Fourteen participants (seven males, seven females) performed four sessions that included two 45-min work periods separated by 15 min of rest. The work periods involved picking weighted bottles from shoulder height and packaging them at waist height for four combinations of bottle mass and picking rate: 2.5 kg–15 bottles per minute (bpm), 2.5 kg–10 bpm, 2.5 kg–5 bpm, and 1.5 kg–15 bpm. Participants reported their RPEs every 5 min and performed a maximum isometric shoulder flexion exertion every 9 min. Pearson product-moment correlation was used to evaluate the linear relationship between RPE and relative strength for each subject and work period. Then, the effects of condition and work period on the average relationship were assessed using a repeated-measures analysis of variance (ANOVA). For the first 45-min period, there were no significantly different correlations between RPE and relative strength across conditions (average r = −0.62 (standard deviation = 0.38); p = 0.57). There was a significant decrease in average correlation for the second work period (r = −0.39 (0.53)). These results suggest that individual subjective responses consistently increase while relative strength declines when starting from a non-fatigued state. However, correlations are weaker when re-engaging in work following incomplete recovery. Thus, starting fatigue levels should be accounted for when considering the expected relationship between RPE and relative strength. [ABSTRACT FROM AUTHOR]

Professional divers are exposed to unique multifactorial hazards in their working environment and adverse cardiovascular effects such as ischemia, arrhythmia, stroke, and death are associated with professional diving. Cardiovascular events are aggravated by diving-induced oxidative stress and account for one-fourth of diving fatalities. This study aimed to measure oxidative and cardiovascular stress in a group of professional divers in Alexandria, Egypt using a panel of biomarkers. A comparative cross-sectional study was conducted between June 2017 and May 2018 at the General Naval Hospital in Alexandria. A total of 50 professional divers and a comparison group of 50 marine seafarers sharing similar maritime environments were enrolled in the study. Participants were clinically evaluated by electrocardiography (ECG) and plasma measurement of trace metals (Fe+, Cu+, and Zn+), electrolytes (Na+, K+, Ca+), and oxidative stress biomarkers (OSBMs; MDA, TAS, GST, GSH, GR, GPx, SOD, and CAT). Significant ECG abnormalities including short corrected QT interval, sinus bradycardia, left ventricular hypertrophy, early repolarization, first-degree heart block, and intraventricular conduction defect were identified among divers. Biochemical analyses revealed high mean levels of FBG [89.0 ± 12.46 vs. 100.5 ± 29.03 mg/dl], LDH-C [41.46 ± 4.01 vs. 39.34 ± 4.34 mg/dl], electrolyte imbalance [higher Na+ (9.44 ± 0.52 vs. 9.19 ± 0.60 mmol/L), and lower Ca+ (141.72 ± 3.53 and 143.26 ± 3.99 mmol/L)], disturbed trace metals [Fe+ and Zn+ (101.1 ± 38.17 vs. 147.6 ± 38.08 and 85.52 ± 27.37 vs. 116.6 ± 21.95 µm/dl, respectively), higher Cu+ (271.3 ± 75.01 vs. 100.8 ± 30.20 µm/dl)], and higher OSBMs (high MDA and reduced CAT, GPx, GSH, GR, and GST enzyme levels) among professional divers compared to the marine seafarers (t-test p < 0.05). Oxidative stress and trace metal imbalance are associated with the pathophysiology of cardiovascular disease; this association, together with electrophysiological changes of ECG may serve as biomarkers for cardiovascular risk assessment in diver periodic medical examinations. [ABSTRACT FROM AUTHOR]