Search

The AgBrO3/few-layer g-C3N4 composite photocatalyst has been developed via an in-situ synthetic method. The structure, morphology, light response range, separation and migration efficiency of the photogenerated electron–hole pairs and element valence state of the as-obtained samples have been characterized. The tetracycline was used to discuss the photocatalytic activities of the samples. The photocatalytic degradation mechanism of the as-obtained composites was also researched. The analysis results show that the photocatalytic degradation property of the asobtained composite photocatalyst appears to the tendency of first increasing and then decreasing with increasing the amount of AgBrO3 under visible light illumination. When the mass ratio of AgBrO3 to g-C3N4 is 4:3, in 60 min, the photocatalytic degradation efficiency of the as-obtained composites reaches the maximum of 79%. It is 37% and 45% higher than that of pure AgBrO3 and g-C3N4, respectively. Moreover, the separation and migration efficiency of the photogenerated electron–hole pairs of the as-prepared composites are also enhanced. In addition, superoxide radicals and holes are the dominant active species during the photocatalytic degradation process.

The AgBrO₃/few-layer g-C₃N₄ composite photocatalyst has been developed via an in-situ synthetic method. The structure, morphology, light response range, separation and migration efficiency of the photogenerated electron-hole pairs and element valence state of the as-obtained samples have been characterized. The tetracycline was used to discuss the photocatalytic activities of the samples. The photocatalytic degradation mechanism of the as-obtained composites was also researched. The analysis results show that the photocatalytic degradation property of the asobtained composite photocatalyst appears to the tendency of first increasing and then decreasing with increasing the amount of AgBrO₃ under visible light illumination. When the mass ratio of AgBrO₃ to g-C₃N₄ is 4:3, in 60 min, the photocatalytic degradation efficiency of the as-obtained composites reaches the maximum of 79%. It is 37% and 45% higher than that of pure AgBrO₃ and g-C₃N₄, respectively. Moreover, the separation and migration efficiency of the photogenerated electron-hole pairs of the as-prepared composites are also enhanced. In addition, superoxide radicals and holes are the dominant active species during the photocatalytic degradation process.

The nanosized Bi-doped SnO2/reduced graphene oxide 3D hybrids have been synthesized via one-step hydrothermal method. The structures, morphologies, photocatalytic activities of the as-prepared samples were discussed, respectively. The formation mechanism of the as-prepared hybrids was also proposed. Experimental results indicated that the usage amount of Bi2Sn2O7 obviously affected the photocatalytic performance of the as-prepared products. When it was 450 mg, the as-prepared sample possessed the band gap energy of 1.9 eV and the photocatalytic efficiency of 90% in 210 min for degradation of rhodamine B solution. In addition, triethylene tetramine and the as-prepared carbon hydrogel could act as reductant to synergistically reduce Bi2Sn2O7 into Bi-doped SnO2 particles during the formation of the hybrids.

Zn2SnO4-reduced graphene oxide photocatalysts were synthesized by using SnCl4 5H2O, Zn(NO3)2 · 6H2O and graphene oxide via hydrothermal process. The structure, morphology, specific surface area and photo response of the as-prepared nanocomposites were characterized by X-ray diffraction, Transmission electron microscopy, UV-vis diffuse reflectance spectra, Brunauer-emmett-teller surface area measurement and Photoluminescence emission spectra. Experimental results showed that the Zn2SnO4 nanoparticles, with 20-30 nm a size range, were uniformly dispersed on the surfaces of reduced graphene oxide. Moreover, the as-prepared Zn2SnO4-reduced graphene oxide photocatalysts exhibited enhanced photocatalytic activities for degradation of Rhodamine B compared to those of pure Zn2SnO4. When the amount of reduced graphene oxide was 4 wt%, it showed the highest photocatalytic efficiency of 99.7% for 240 min, and the photocatalytic efficiency was still 98.5% after it was recycled 4 times. It also possessed the band gap of 2.48 eV and specific surface area of 58.1 m2 g-1.

Zinc ferrite-reduced graphene oxide composites, which could effectively remove the methylene blue from aqueous solution, were prepared via a facile solvothermal process. These as-prepared samples were characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, vibration sample magnetometer and UV-vis diffuse reflectance spectroscopy. Experimental results showed that solvents played an important role in the electron structure of the final samples. Moreover, they influenced the photocatalytic performance as well. Among all the samples prepared in different solvents, those composites prepared in N-N-dimethylformamide showed the greatest performance. They could effectively remove more than 90% of the methylene blue from the solution in about 180 min. The efficient removal of target dye turned out to be the result of the combination of physical adsorption and photocatalytic degradation under visible light irritation. These catalysts showed remarkable stability, which could be effectively reused for three times. In addition, all these samples showed a certain magnetic response, which was beneficial to recycle.

Zinc oxide/reduced graphene oxide composites with various morphologies and properties were prepared via a one-step solvothermal process. The formation of zinc oxide and reduction of graphene oxide were simultaneously accomplished. These as-obtained samples showed high performance in removing methylene blue from aqueous solution. Solvent could play an important role in tuning the morphologies of the zinc oxide and the efficiency of the final composites. Composites prepared in acetone showed the highest removal efficiency, compared with those prepared in water and ethanol. Loading content of the reduced graphene oxide could affect the performance as well. With the increase in the content of the reduced graphene oxide, the as-prepared samples showed enhanced performance gradually. The as-prepared composite showed certain stability, with a maximum recyclability of 5 times for efficient removal. The effective removal of target dye turned out to be the result of the combination of physical adsorption and photo-catalysis.

Zn2SnO4-reduced graphene oxide photocatalysts were synthesized by using SnCl4 5H2O, Zn(NO3)2 · 6H2O and graphene oxide via hydrothermal process. The structure, morphology, specific surface area and photo response of the as-prepared nanocomposites were characterized by X-ray diffraction, Transmission electron microscopy, UV-vis diffuse reflectance spectra, Brunauer-emmett-teller surface area measurement and Photoluminescence emission spectra. Experimental results showed that the Zn2SnO4 nanoparticles, with 20-30 nm a size range, were uniformly dispersed on the surfaces of reduced graphene oxide. Moreover, the as-prepared Zn2SnO4-reduced graphene oxide photocatalysts exhibited enhanced photocatalytic activities for degradation of Rhodamine B compared to those of pure Zn2SnO4. When the amount of reduced graphene oxide was 4 wt%, it showed the highest photocatalytic efficiency of 99.7% for 240 min, and the photocatalytic efficiency was still 98.5% after it was recycled 4 times. It also possessed the band gap of 2.48 eV and specific surface area of 58.1 m2 g-1.

The nanosized Bi-doped SnO2/reduced graphene oxide 3D hybrids have been synthesized via one-step hydrothermal method. The structures, morphologies, photocatalytic activities of the as-prepared samples were discussed, respectively. The formation mechanism of the as-prepared hybrids was also proposed. Experimental results indicated that the usage amount of Bi2Sn2O7 obviously affected the photocatalytic performance of the as-prepared products. When it was 450 mg, the as-prepared sample possessed the band gap energy of 1.9 eV and the photocatalytic efficiency of 90% in 210 min for degradation of rhodamine B solution. In addition, triethylene tetramine and the as-prepared carbon hydrogel could act as reductant to synergistically reduce Bi2Sn2O7 into Bi-doped SnO2 particles during the formation of the hybrids.

Carbon nanotubes were unzipped to become reduced-graphene nanoribbons via one-step solvothermal process in a Teflon-lined autoclave. The samples were characterized by X-ray diffraction, thermo-gravimetric analysis and transmission electrical microscopy, respectively. Results showed that the solvothermal reaction temperature played an important role in the structure of the samples. When it was 75 °C, carbon nanotubes were completely cutted into graphene oxide nanoribbons. Moreover, when it was 155 °C, they were become reduced-graphene nanoribbons. Furthermore, the as-prepared reduced-graphene nanoribbons could improve mechanical strength of the phenolic resin/hollow glass beads foamed composites. When the reduced-graphene nanoribbons loading was 0.4 wt%, the tensile and compressive strength of the composites were increased by 19.7% and 21.3%, respectively.