Search

Summary: This paper takes a fundamental view of the electron energy loss spectra of monolayer and few layer MoS2. The dielectric function of monolayer MoS2 is compared to the experimental spectra to give clear criteria for the nature of different signals. Kramers–Krönig analysis allows a direct extraction of the dielectric function from the experimental data. However this analysis is sensitive to slight changes in the normalisation step of the data pretreatment. Density functional theory provides simulations of the dielectric function for comparison and validation of experimental findings. Simulated and experimental spectra are compared to isolate the π and π + σ surface plasmon modes in monolayer MoS2. Single‐particle excitations obscure the plasmons in the monolayer spectrum and momentum resolved measurements give indication of indirect interband transitions that are excited due to the large convergence and collection angles used in the experiment. Lay Description: Two‐dimensional materials offer a path forward for smaller and more efficient devices. Their optical and electronic properties give way to beat the limits set in place by Moore's Law. Plasmon are the collective oscillations of electrons and can confine light to dimensions much smaller than its wavelength. In this work we explore the plasmonic properties of MoS2, a representational candidate from a family of 2D materials known as transition metal dichalcogenides. High resolution electron microscopy and spectroscopy provide insights in the plasmonic properties of MoS2 down to an atomic scale. Experimental results show the relationship between plasmons and interband transitions in the electron energy loss spectrum. Density functional theory provides a theoretical support for the experimental findings and provides commentary on the fundamental underlying physics. [ABSTRACT FROM AUTHOR]

Summary: Regeneration of diesel particulate filter (DPF) is a complicated process due to its high operating temperature and associated oxidation of soot on the filter substrate. Several oxidation mechanisms of diesel soot have been proposed based on reaction kinetics, but more information about the oxidation phenomena is needed in a practical system, that is, soot oxidation on a DPF substrate. In this work, the DPF regeneration process was, for the first time, visualized at the particle scale ex‐situ, in time‐lapse series, using field emission scanning electron microscopy (FE‐SEM). Time‐lapse transformation of soot cake layer on a real DPF was followed from initiation through the complete regeneration process. In parallel, transformation of the soot primary particle diameter was directly measured using high‐resolution transmission electron microscopy. FE‐SEM visualization clearly showed shrinkage of the soot cake layer on the DPF wall as oxidation progressed. Furthermore, diameter distribution analysis revealed a trend of shrinkage of the nanoscale soot primary particles during oxidation, supporting the FE‐SEM observations of the micron‐scale shrinkage of the agglomerated soot cake layer. Fragmentation of the shrunken soot cake layer was also observed and is suspected to be a result of locally higher gas flow that depends on surface pore morphology of the filter substrate. Lay Description: In this work, the DPF regeneration process was, for the first time, visualized at the particle scale ex‐situ, in time‐lapse series, using field emission scanning electron microscopy (FE‐SEM). Time‐lapse transformation of soot cake layer on a real DPF was followed from initiation through the complete regeneration process. In parallel, transformation of the soot primary particle diameter was directly measured using high resolution transmission electron microscopy. FE‐SEM visualization clearly showed shrinkage of the soot cake layer on the DPF wall as oxidation progressed. Furthermore, diameter distribution analysis revealed a trend of shrinkage of the nano‐scaled soot primary particles during oxidation, supporting the FE‐SEM observations of the shrinkage of the micron‐scale agglomerated soot cake layer. Fragmentation of the shrunken soot cake layer was also observed and is suspected to be a result of locally higher gas flow that depends on surface pore morphology of the filter substrate. Further detail mechanism about transformations of the soot cake layer was additionally discussed based on electrostatic attraction. [ABSTRACT FROM AUTHOR]

Summary: Geometrical phase analysis (GPA) is typically a powerful tool to investigate the deformation in high resolution transmission electron microscopy images and has been used in various fields. During GPA, strain components are calculated relative to an undistorted reference region. In the present work, the effect of reference region size on strain measurements has been investigated. Experimental measurements on a locally distorted gold nanoparticle exhibited that a small reference region below the GPA spatial resolution can introduce an inaccuracy in the measured displacement field, which appears as a significant increase in measured strains and severe fluctuation in phase images. The inaccuracy may be ascribed to an error of insufficient sampling. Our results suggest that a small reference region below the GPA spatial resolution should be avoided during GPA. This prerequisite should be paid more attention to during strain measurement on nanoparticles. [ABSTRACT FROM AUTHOR]

Manipulation of viable Yersinia pestis (etiologic agent of plague) in the laboratory usually necessitates elevated biosafety and biocontainment procedures, even with avirulent or vaccine strains. To facilitate downstream biochemical or physical analyses in a Biosafety Level 1 laboratory environment, effective inactivation without affecting its intrinsic properties is critical. Here, we report on the morphological and biochemical changes to Y. pestis surfaces following four different fixation methods that render the cells nonviable. The results, obtained at the single cell level, demonstrate that methanol inactivation is best able to preserve bacterial morphology and bioactivity, enabling subsequent analysis. This nanoscale evaluation of the effects of inactivation on cell morphology and surface bioactivity may provide a crucial preparatory approach to study virulent pathogens in the lab setting using high-resolution microscopic techniques such as atomic force microscopy. [ABSTRACT FROM AUTHOR]

Precipitates and solute enrich in aged ferritic steel containing copper were examined using high-resolution electron microscopy, high-angle annular dark-field scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy. Two ledgeswith one-atom and two-atom layers height in the 9R/3R interface were observed. The enrichment of copper into two successive closed-packed planes with an interval of Fe-rich close-packed plane was detected. The passage of the Shockley partial, or the shearing, changes the stacking sequence of closed-packed planes. Finally, 9R Cu variant transformed into 3R Cu variant. [ABSTRACT FROM AUTHOR]

Continuous research on small-scale mechanical structures and systems has attracted strong demand for ultrafine deformation and strain measurements. Conventional optical microscope cannot meet such requirements owing to its lower spatial resolution. Therefore, high-resolution scanning electronmicroscope has become the preferred system for high spatial resolution imaging and measurements. However, scanning electron microscope usually is contaminated by distortion and drift aberrations which cause serious errors to precise imaging and measurements of tiny structures. This paper develops a new method to correct drift and distortion aberrations of scanning electron microscope images, and evaluates the effect of correction by comparing corrected images with scanning electron microscope image of a standard sample. The drift correction is based on the interpolation scheme, where a series of images are captured at one location of the sample and perform image correlation between the first image and the consequent images to interpolate the drift-time relationship of scanning electron microscope images. The distortion correction employs the axial symmetry model of charged particle imaging theory to two images sharing with the same location of one object under different imaging fields of view. The difference apart from rigid displacement between the mentioned two images will give distortion parameters. Three-order precision is considered in the model and experiment shows that one pixel maximum correction is obtained for the employed high-resolution electronmicroscopic system. [ABSTRACT FROM AUTHOR]