Search

Background: One of the challenges for extreme ultraviolet (EUV) lithography is the mitigation of mask three-dimensional effects arising from the oblique incident angle and the mask topography. As the scanners’ numerical aperture and the pattern aspect ratio increase, these effects become more prominent. A potential solution to reduce them consists in replacing the current TaBN absorber for a higher-k material. Aim: We demonstrate the potential of a mask inspection platform to evaluate the impact of different absorber materials on actinic defect inspection. Approach: We evaluate the performance of a reflective-mode EUV mask scanning microscope (RESCAN), our actinic lensless inspection tool, with three different absorber materials (hydrogen silsesquioxane, TaBN, and Ni). We study the effect of these materials on the image formation and compare the defect maps. Results: The Ni absorber mask exhibits a better contrast compared to the TaBN one, even though the thickness of the layers differs only by 10 nm. Programmed defects are localized and detected with a high signal-to-noise ratio (SNR). Conclusions: The gain in contrast for the Ni absorber being significant, the SNR is higher for a smaller defect in a TaBN absorber photomask. RESCAN allows the evaluation of the performance of absorber materials in defectivity and image formation on small samples.

Background: The purpose of EUV pellicles is to protect the surface of EUV lithography masks from particle contamination. It is important to ensure that the optical characteristics of the pellicle membrane do not critically affect the reticle image quality. Aim: We want to verify the possibility to integrate pellicle inspection and characterization capabilities in reflective-mode EUV mask scanning microscope (RESCAN), our actinic mask inspection platform based on coherent diffraction imaging. Approach: We studied the impact of a few selected EUV pellicle prototypes on the quality and the contrast of the reticle image obtained with RESCAN. Results: We measured the scattering distribution of the pellicles, and we correlated it with the mask image contrast and fidelity. We also detected the presence of a 6.5-μm-diameter fiber on the pellicle surface. Conclusions: We demonstrated that RESCAN is suitable for through-pellicle actinic mask inspection and can be also used to characterize and monitor the pellicle quality.

Extreme ultraviolet interference lithography (EUV-IL) is relatively simple and inexpensive technique that can pattern high resolution line/space and has been successfully used for the resist performance testing. While the aerial image in EUV-IL formed by two beams is straightforward to understand and has contrast of 1, the aerial image formed by four beams providing contact holes (CHs) is rather complicated. The phases of the interfering beams as well as by the polarization play big roles in the image of the interference pattern and its contrast. To understand thoroughly the formation of CH, we investigate theoretically polarization effect on the aerial image generated with two and four-beam interference. We show the coherent four-beam interference provides the highest contrast (1) with zero initial phase. But the interference pattern strongly depends on the phase difference and switch from one to another when the phase difference between the two pairs of gratings is π/2. Consequently, the contrast also decreases and interference pattern could end with random form when the relative phase of the beams cannot be fully controlled. We propose an incoherent four-beam interference model by intentionally designing the grating with a slightly different pitch to create an optical path difference that is longer than the coherence length of the EUV light (13.5 nm). We also discuss the polarization-induced contrast loss. We verify our analytical model by printing both positive tone chemically amplified resist (CAR) and a negative tone inorganic resist.

Actinic mask defect inspection is an essential process step for the implementation of extreme ultraviolet (EUV) lithography in high-volume manufacturing. The main challenges for any mask defect inspection platform are resolution, sensitivity, and throughput. The reflective-mode EUV mask scanning lensless imaging microscope (RESCAN) is being developed to provide actinic patterned mask inspection capabilities for defects and patterns with high resolution and high throughput for node 7 and beyond. Namely, the goal of the RESCAN project is to develop a tool capable of inspecting an EUV reticle in 7 h and detect mask defects down to a size of 10 nm×10 nm. The lensless imaging concept allows overcoming the resolution limitations due to the numerical aperture and lens aberrations of conventional mask imaging systems. With the increasing availability of computational power and the refinement of iterative phase reconstruction algorithms, lensless imaging became a powerful tool to synthesize the complex amplitude of the reticle image providing us also with extremely valuable information about phase and mask three-dimensional effects. Here, we present a brief description of the current prototype of the RESCAN platform and illustrate a few experimental examples of programmed defect detection.

Since completely defect-free masks will be hard to achieve, it is essential to have a good understanding of the printability of the native extreme ultraviolet (EUV) mask defects. In this work, we performed a systematic study of native mask defects to understand the defect printability they cause. The multilayer growth over native substrate mask blank defects was correlated to the multilayer growth over regular-shaped defects having similar profiles in terms of their width and height. To model the multilayer growth over the defects, a multilayer growth model based on a level-set technique was used that took into account the tool deposition conditions of the Veeco Nexus ion beam deposition tool. Further, the printability of the characterized native defects was studied at the SEMATECH-Berkeley Actinic Inspection Tool (AIT), an EUV mask-imaging microscope at Lawrence Berkeley National Laboratory. Printability of the modeled regular-shaped defects, which were propagated up the multilayer stack using level-set growth model, was studied using defect printability simulations implementing the waveguide algorithm. Good comparison was observed between AIT and the simulation results, thus demonstrating that multilayer growth over a defect is primarily a function of a defect’s width and height, irrespective of its shape.

Extreme UV (EUV)-wavelength actinic microscopy yields detailed information about EUV mask patterns, architectures, defects, and the performance of defect repair strategies without the complications of photoresist imaging.To understand the pattern measurement limits of EUV mask microscopy, we investigate the effects of shot noise on aerial image linewidth measurements in the 22- and 16-nm lithography generations. Using a simple model we probe the influence of photon shot noise on measured, apparent line roughness, and find general flux density requirements independent of the specific EUV microscope configurations. Analysis reveals the trade-offs between photon energy density, effective pixel dimension on the CCD, and image log slope (ILS). We find that shot-noise-induced linewidth roughness (LWR) varies inversely with the square root of the photon energy density and is proportional to the magnification ratio. While high magnification is necessary for adequate spatial resolution, for a given flux density, higher magnification ratios have diminishing benefits. We find that to achieve an LWR (3) value of 5% of linewidth for dense, 88-nm mask features with a 2.52 normalized ILS value (image log-slope, ILS, equal to 28.6/µm) and 13.5-nm effective pixel width (1000 × magnification ratio), a peak photon flux of approximately 1400 photons/pixel per exposure is required.