Search

The solubility of several gases and vapors in glassy ethyl cellulose (EC) over wide ranges of temperature and pressure is described by means of a thermodynamic model, which specifically accounts for the nonequilibrium volumetric properties of EC. The behaviors of polymer/penetrant mixtures are repre- sented by the well-established nonequilibrium lattice fluid model (NELF) in its latest development, suitable to be used in a pure predictive fashion for the representation of the volume swelling of the polymer matrix, as induced by penetrant sorption. The analysis reveals the ability of the model to describe all the experimental trends, and a sole binary parameter for each polymer/penetrant couple is considered. The NELF model allows the satisfactory prediction of the thermodynamic properties of all polymer/solute systems examined, in the entire range considered for temperature and vapor fugacity.

The gas solubility in polymeric membranes affects the separation performance, particularly in the case of CO2 capture processes. Solubility and solubility-selectivity in membranes of multicomponent mixtures can deviate rather markedly from the corresponding pure gas values, due to swelling and competition phenomena, and require dedicated time-consuming measurements. Many experiments can be avoided by using a suitable thermodynamic tool, such as an Equation of State (EoS) model, to represent the gases sorption in the membrane. Such models require, for parameterization, knowledge of the polymer behavior above the glass transition Tg, which is a limit for membrane modeling, because the most attractive polymers for gas separation are rigid matrices characterized by very high Tg values, difficult to reach experimentally. In this work, we study the sorption of CO2/CH4 mixtures in a high-Tg polyimide membrane (Matrimid®) using a bottom-up approach. Pressure-volume-temperature data for Matrimid® above Tg are generated using NPT Molecular Dynamics simulations: the results are regressed to find Matrimid® parameters for the PC-SAFT Equation of State. Finally, the Non Equilibrium PC-SAFT macroscopic model (NE-PC-SAFT) is used to calculate CO2 and CH4 solubility and solubility-selectivity as a function of gas mixture pressure, composition and temperature. The approach is tested successfully over many experimental pure gas and vapor sorption data in Matrimid®. Mixed gas calculations predict a marked competition, which affects more methane than CO2 sorption, and results in a higher-than-ideal value of solubility-selectivity. Combined with the fact that experimental mixed gas permeability-selectivity is lower than the ideal value, such results indicate that the diffusivity of CH4 in Matrimid is significantly enhanced in presence of CO2, causing a decrease of diffusivity-selectivity. The gas solubility in polymeric membranes affects the separation performance, particularly in the case of CO2 capture processes. Solubility and solubility-selectivity in membranes of multicomponent mixtures can deviate rather markedly from the corresponding pure gas values, due to swelling and competition phenomena, and require dedicated time-consuming measurements. Many experiments can be avoided by using a suitable thermodynamic tool, such as an Equation of State (EoS) model, to represent the gases sorption in the membrane. Such models require, for parameterization, knowledge of the polymer behavior above the glass transition Tg which is a limit for membrane modeling, because the most attractive polymers for gas separation are rigid matrices characterized by very high Tg values, difficult to reach experimentally. In this work, we study the sorption of CO2/CH4 mixtures in a high-Tg polyimide membrane (Matrimid®) using a bottom-up approach. Pressure-volume-temperature data for Matrimid® above Tg are generated using NPT Molecular Dynamics simulations: the results are regressed to find Matrimid® parameters for the PC-SAFT Equation of State. Finally, the Non Equilibrium PC-SAFT macroscopic model (NE-PC-SAFT) is used to calculate CO2 and CH4 solubility and solubility-selectivity as a function of gas mixture pressure, composition and temperature. The approach is tested successfully over many experimental pure gas and vapor sorption data in Matrimid®. Mixed gas calculations predict a marked competition, which affects more methane than CO2 sorption, and results in a higher-than-ideal value of solubility-selectivity. Combined with the fact that experimental mixed gas permeability-selectivity is lower than the ideal value, such results indicate that the diffusivity of CH4 in Matrimid® is significantly enhanced in presence of CO2, causing a decrease of diffusivity-selectivity.