Search

Heterojunctioned architectures were facilely fabricated using hydrothermally treated electrospun TiO 2 nanofibers in an alkaline Sr(NO 3 ) 2 precursor solution in an electronic oven. TiO 2 on the fiber surface was partially dissolved into Ti 4+ to react with Sr 2+ in favor of the nucleation of SrTiO 3 on TiO 2 nanofibers, and thus a heterojunction was formed between SrTiO 3 and TiO 2 , which will benefit the improvement of photocatalytic activity. And then a multifunctional membrane was created by functionalizing the surface of commercial cellulose acetate (CA) membrane with heterojunctioned SrTiO 3 /TiO 2 nanofibers. This newly structured membrane exhibited excellent water purification performances in a concurrent photocatalytic membrane filtration system under the irradiation of UV light, because it is able to integrate the advantages of photocatalysis and membrane filtration while minimizes their disadvantages. The high water purification performances in terms of high photodegradation ability and high permeate flux are attributed to the high photocatalytic activity of heterojunctioned SrTiO 3 /TiO 2 nanofibers architectures and their structured porous functional layer favorable for fast water pass through. [ABSTRACT FROM AUTHOR]

Ultrathin and/or ultrasmooth selective layer is one of the paramount goals in membrane realm for maximizing separation efficiency and/or minimizing fouling tendency. Towards this goal, the architecture of hydrogel selective layer is finely tuned for the first time for improving engineered osmosis (EO) membrane performance. Through delicately controlling synthesis parameters, ultrathin selective layer as thin as 30 nm, and ultrasmooth selective layer with sub-1 nm roughness (the smoothest EO membrane in literature) are successfully synthesized respectively. Analysis of reverse osmosis (RO) experimental results reveals hydrogel layer resistance to water permeation is linearly reduced by 1.40 × 1013 m−1 as the layer is tailored thinner per 10 nm, which leads to the remarkable enhancement of water permeability by ~10 times from 0.49 L m−2 h−1 bar−1 of 500 nm thickness to 4.75 L m−2 h−1 bar−1 of 30 nm thickness. Pressure-retarded osmosis (PRO) and forward osmosis (FO) tests indicate 45-nm-thick hydrogel layer achieves the maximum separation efficiency in terms of specific water flux (J W /J S). Moreover, the mechanism for tuning hydrogel layer architecture is discussed on the basis of microscopic characterizations. This study sheds new light on ultrathin and ultrasmooth selective layer for promoting EO membrane to smartly tackle different kinds of wastewater. Ultrathin and ultrasmooth hydrogel membranes are synthesized through fine-tuning selective layer architecture for smartly tackling different wastewaters via engineered osmosis with high separation performance. Image 1 • Hydrogel membrane architecture is fine-tuned for engineered osmosis. • Ultrathin hydrogel selective layer as thin as 30 nm is synthesized. • Ultrasmooth hydrogel selective layer with sub-1 nm roughness is achieved. • The effect of hydrogel layer architecture on separation performance is revealed. • Hydrogel membrane holds the promise to smartly tackle different wastewaters. [ABSTRACT FROM AUTHOR]