Search

It has been recognized that tissue stiffness provides useful diagnostic information, as with palpation as a screening for diseases such as cancer. In recent years, shear wave elastography (SWE), a technique for evaluating and imaging tissue elasticity quantitatively and objectively in diagnostic imaging, has been put into practical use, and the amount of clinical knowledge about SWE has increased. In addition, some guidelines and review papers regarding technology and clinical applications have been published, and the status as a diagnostic technology is in the process of being established. However, there are still unclear points about the interpretation of shear wave speed (SWS) and converted elastic modulus in SWE. To clarify these, it is important to investigate the factors that affect the SWS and elastic modulus. Therefore, physical and engineering factors that potentially affect the SWS and elastic modulus are discussed in this review paper, based on the principles of SWE and a literature review. The physical factors include the propagation properties of shear waves, mechanical properties (viscoelasticity, nonlinearity, and anisotropy), and size and shape of target tissues. The engineering factors include the region of interest depth and signal processing. The aim of this review paper is not to provide an answer to the interpretation of SWS. It is to provide information for readers to formulate and verify the hypothesis for the interpretation. Therefore, methods to verify the hypothesis for the interpretation are also reviewed. Finally, studies on the safety of SWE are discussed.

We previously reported that acoustic radiation force impulse (ARFI) with concomitant administration of perfluorobutane as an ultrasound contrast agent (UCA)-induced arrhythmias at a mechanical index (MI) of 1.8 or 4.0 in a rabbit model. The present study identified the location of arrhythmias with a MI

Acoustic radiation force (ARF) impulse can be used to estimate the elasticity of cardiac muscle. The purpose of this study was to evaluate the effect of ARF on the heart with concomitant administration of the ultrasound contrast agent (UCA) perfluorobutane for recently developed elasticity imaging such as shear wave imaging. Ultrasound with ARF was applied to the heart of Japanese white rabbit with or without UCA administration. During the exposure, electrocardiographs were recorded. Following the exposure of ultrasound with a duration of 10 ms and a mechanical index (MI) of 4.0 to the heart, extra waves (QRS complex) were observed only after UCA administration. Although life-threatening arrhythmia was not observed, a greater increase in the frequency of the extra waves was observed following a drip infusion compared with a single (bolus) UCA infusion. In addition, 16.3 % of extra waves were followed by arterial pressure pulse. Cardiac ultrasound with higher MI and longer duration should be carefully considered, particularly with the concomitant use of UCA and higher MI.

Acoustic radiation force impulse (ARFI) has recently been used for tissue elasticity measurement and imaging. On the other hand, it is predicted that a rise in temperature occurs. In-situ measurement of temperature rise in animal experiments is important, yet measurement using thermocouples has some problems such as position mismatch of the temperature measuring junction of the thermocouple and the focal point of ultrasound. Therefore, an in-situ measurement system for solving the above problems was developed in this study.The developed system is composed mainly of an ultrasound irradiation unit including a custom-made focused transducer with a through hole for inserting a thin-wire thermocouple, and a temperature measurement unit including the thermocouple.The feasibility of the developed system was evaluated by means of experiments using a tissue-mimicking material (TMM), a TMM containing a bone model or a chicken bone, and an extracted porcine liver. The similarity between the experimental results and the results of simulation using a finite element method (FEM) implied the reasonableness of in-situ temperature rise measured by the developed system.The developed system will become a useful tool for measuring in-situ temperature rise in animal experiments and obtaining findings with respect to the relationship between ultrasound irradiation conditions and in-situ temperature rise.