Search

The excitation and propagation of an electromagnetic field is a very complex problem in Stratified conductive structures (SCS) because of their complicated physical properties. In single air-cored coil above multilayered conductive structures, the impedance of an eddy-current coil is calculated based on the electromagnetic field. This paper provides insight into eddy current models for stratified conductive structures using three types of analytical approaches, including Cheng's matrix method, Truncated region eigenfunction expansion (TREE) method, and the innovative method based on the reflection and transmission theory of the electromagnetic waves. The analytical expressions of the three models are discussed and compared. Numerical simulation of an FEM model is performed, and the experimental results verify the developed models. [ABSTRACT FROM AUTHOR]

A number of interesting phenomena at fluid-solid interfaces can be observed when the incident angle approaches the Rayleigh angle, including Schoch displacement and leaky Rayleigh waves. Besides the experimental and theoretical research on these problems, numerical tools have been more and more widely used for these complex problems. Based on previous experimental and numerical researches, a 2D finite element model has been built to reproduce the Schoch effects. With the same model, the minimum reflection profile is investigated for the feasibility of material characterization, especially for residual stress evaluation. Residual stress is one of the important properties for structures, and its measurement is a popular research topic in nondestructive evaluation. However, it is not possible to put the residual stress into the numerical model directly. According to the relation of residual stress with mechanical properties, the material damping and wave speed have been alternatively adopted in this work. The influence of minimum reflection profile by residual stress has been shown by the change of wave speed and damping factor. Simulation results show that the minimum reflection profile is a potential method for residual stress evaluation. [ABSTRACT FROM AUTHOR]

This paper proposes an analytical approach that can describe the Pulsed Eddy Current Testing (PECT) of stratified conductive structures by a single air-coil used for detecting and sizing of metal loss due to interlayer corrosion. Specifically for a single air-cored coil above a multilayered conductive structure, the coil impendance response of the cylindrical eddy-current probe is calculated based on the truncated region eigenfunction expansion (TREE) method using the generalized matrix coefficients in series form. Analytical modeling of pulsed eddy current is developed using the Fourier series for multilayered conductive structures. A simulation study is carried out for demonstrating the capability of the proposed approach for sizing the metal loss in a two-layer specimen. Furthermore, the experiment is set up to confirm the simulating results of the analytical model for multilayered steels. Good agreement between the theoretical results and measured signals is observed. [ABSTRACT FROM AUTHOR]