Search

A general method is presented for the inverse kinematics resolution of redundant manipulators with joint limits. The success of avoiding joint angular position limits of the original clamping weighted least-norm method is ascribable to the strength of the repulsive potential field function. However, the repulsive potential field function may lead to excessive joint angular velocities that can exceed the corresponding limits. We propose an improved clamping weighted least-norm method that adds an elastic field function into the original method for the sake of sustaining the constraints of joint angular velocity limits. Moreover, for hierarchical task-level construction, the priority of avoiding joint angular velocity limits is lower than that of avoiding joint angular position limits. To adequately illustrate the effectiveness of the proposed method, case studies were performed in comparison with other methods in singular configurations of a redundant manipulator. [ABSTRACT FROM AUTHOR]

A six-axis vibration isolation system is essential to high-precision space systems for attenuating vibrations on precise instruments. The kinematic optimal design is researched for the space six-axis vibration isolator via Stewart mechanism. Jacobian matrix is the basis of the kinematic performance index. However, the conventional Jacobian matrix is not usually dimensionally homogeneous due to the inhomogeneous physical units, caused by the different mathematical representations of the rotation and translation. In this paper, we propose a dual quaternion approach to derive the dimensionally homogeneous Jacobian matrix of a general six-axis parallel mechanism. Two quaternions are used to parameterize the rotation and translation of the platform. The dimensionally scaling factor for the generalized Jacobian matrix is defined as the ratio of the norms of the two quaternions. The dimensionally homogenous Jacobian matrix is then obtained and applied to the optimal design of the six-axis vibration isolator. The performance index of isotropy is considered to make the isolator minimum kinematic coupling in its working configuration. [ABSTRACT FROM AUTHOR]

A nondestructive testing technique based on magnetic flux leakage is presented to inspect automatically the stay cables with large diameters of a cable-stayed bridge. Using the proposed inspection method, an online nondestructive testing (NDT) modular sensor is developed. The wreath-like sensor is composed of several sensor units that embrace the cable at equal angles. Each sensor unit consists of two permanent magnets and a hall sensor to detect the magnetic flux density. The modular sensor can be installed conveniently on cables with various diameters by increasing the number of sensor units and adjusting the relative distances between adjacent sensor units. Results of the experiments performed on a man-made cable with faults prove that the proposed sensor can inspect the status signals of the inner wires of the cables. To filter the interfering signals, three processing algorithms are discussed, including the moving average method, improved detrending algorithm, and signal processing based on a digital filter. Results show that the developed NDT sensor carried by a cable inspection robot can move along the cable and monitor the state of the stay cables. [ABSTRACT FROM AUTHOR]