Search

Copper/steel composite is a kind of composite with excellent performance and broad application prospects. In this paper, the micro-morphology and structure of the interface of copper/steel composite prepared by the hot-dip casting were observed by scanning electron microscope and transmission electron microscope, and the formation mechanism of the interface area was explored. The results show that the hot-dip casting temperature has a great influence on the micro-structure and morphology of the copper/steel interface area. When the hot-dip casting temperature is lower than 1125 °C, the copper/steel interface area is basically in a straight line. Even if the hot-dip casting time is extended, the interface characteristics change little. At 1100 °C, the copper-rich phase precipitated at the interface area is the coherent precipitates of Cu and BCC-Fe, with the crystal orientation <110> and the diameter about 10 nm ~ 30 nm. When the hot-dip casting temperature reaches 1150 °C, the copper/steel interface area begins to appear new micro-morphology, and the range of new micro-morphology becomes larger and larger with the increase in the hot-dip casting temperature and the extension of the hot-dip casting time. At 1200 °C, the copper-rich phase precipitated at the interface is the coherent precipitates of FCC-Cu and FCC-Fe, with the crystal orientation <100> and the size similar to that at 1100 °C. In the process of the hot-dip casting, the formation of the copper/steel interface area experienced three stages: the co-temperature of copper/steel and the wetting of copper liquid on solid steel, the formation and transformation of the solid–liquid mixed layer between steel and copper liquid and the evolution stage of the liquid–solid mixed layer during cooling and solidification. This kind of interface zone with gradual structure tightly connects the steel matrix and solidified copper together, to form a copper/steel composite with strong bonding. [ABSTRACT FROM AUTHOR]