Search

This study investigated the different geotechnical characteristics of soil stabilization with the addition of lime and rice husk ash (RHA) in varying amounts (3%, 5%, 7%, and 9% lime, and 4%, 8%, 12%, and 16% RHA). A series of compaction, unconfined compressive strength (UCS), California bearing ratio (CBR), pH, and X-ray diffraction (XRD) tests were performed in the laboratory to assess the impact of the considered admixtures on the stabilized soil parameters. This study also proposes the successful integration of an artificial neural network (ANN) and a Gaussian process regression (GPR) with the experimental UCS observations. The lime concentration, RHA concentration, and curing period were considered as the input parameters, and UCS was considered as the response. The proposed framework was extended to analyze the compressive behavior of treated soil on the minuscule level. Such coupled machine learning-based experimental investigation can provide deep insight into the soil behavior which otherwise would have remained unexplored due to the prohibitive nature of performing laboratory experiments on a large scale. The findings demonstrated the effectiveness of RHA in addition to lime in stabilizing the considered expansive soil. With the addition of lime and RHA mix, the UCS and CBR values of the treated soil increased significantly. [ABSTRACT FROM AUTHOR]

This paper aims to show that the addition of lime and lime/cement can significantly improve both the stiffness and the resistance to permanent deformation of clay soils even under adverse, though realistic, curing conditions. The AASHTO Guide for Design of Pavement Structures incorporates a method of calculating subgrade resilient modulus (MR), using repeated load triaxial testing, with respect to seasonal variations of the soil’s moisture content and temperature, while the equivalent British specifications adopt a “soaked California bearing ratio” approach. In practice 8°C is a realistic worst case curing temperature in situ and a (necessarily) wetter underlying clay will allow water to be drawn into the chemically treated layer during curing as a result of suctions, while the material will experience a small degree of confinement after compaction. These conditions have been replicated in a series of repeated load triaxial tests on lime and lime/cement stabilized, predominantly kaolinitic clay and the results compared with those from sealed samples, which were also cured at 8°C. All samples were subjected to 100 cycles of stresses representing 20, 40, 60, and 80% of the relevant undrained shear strength. This paper concludes that allowing the samples access to water is necessary if field performance is to be replicated. [ABSTRACT FROM AUTHOR]

Laboratory tests have been carried out in order to evaluate the improvement in engineering properties relevant to highway design and construction obtained when clayey subgrade soils are stabilized with lime or fly ash. The experimental program included California bearing ratio (CBR) tests to evaluate the bearing strength of stabilized soils used as working platforms during highway construction. The admixture of lime or fly ash caused an increase in the plasticity limit, while both the liquid limit and the plasticity index of the soils have been reduced. Substantial increases in the California bearing ratio value, higher than those of the soil-fly ash mixtures, have been obtained when the soil samples were mixed with lime. The swelling after a 4-day soaking period has been reduced with the addition of both additive materials. The increase in optimum moisture content acts subsidiarily to the increased CBR value, particularly at high lime or fly ash percentages. An analogous effect has been found for the maximum dry density reduction. [ABSTRACT FROM AUTHOR]