Search

Enhancing the dynamic properties of expansive soils using cementitious materials has attracted the attention of many researchers over the past few decades. Supplementary cementitious materials (SCMs) can be used as partial substitutes for cement owing to their pozzolanic activity that further improves the mechanical performance of cement-stabilized soils upon curing. In this study, the effect of cement and zeolite incorporation on the mechanical behavior of expansive clay was quantified using the pressure wave velocity (Vp) indicator obtained from ultrasonic pulse velocity tests performed at different curing times. Furthermore, a polynomial model was developed to establish the relationship between Vp and zeolite replacement levels at specific curing times and cement contents. The results show that a polynomial function captured the decreasing trend of Vp upon the increase in zeolite at curing times below 14 days. Additionally, the developed equation explained the upward trend of Vp owing to the pozzolanic activity of zeolite at later curing times with an accuracy of over 92%. The coefficients of the polynomial model also increased with the increment of the cement percentage which conformed to the consecutive rise in Vp. Ultimately, the polynomial coefficients were expressed in terms of cement content and curing time using the Volterra series. Using this model, the optimum percentage of cement replaced with zeolite (Zopt), the efficiency of using Zopt instead of cement, and the percentage of zeolite replacement to achieve equivalent Vp of cemented clay samples (ZC) were estimated. The findings of this study contribute to promoting geotechnical sustainability by replacing cement with zeolite that has a considerably lower environmental footprint. Clay is a type of soil that can be found in many construction projects. For instance, many roads and buildings' foundations are constructed on clay soils. To ensure the necessary strength of the clay under the main structure, the soil should often be stabilized using adhesive construction materials such as cement. Interestingly, a portion of the cement could be replaced with other minerals not only to improve engineering performance but also to promote sustainability by lowering cement consumption. In this study, the effect of zeolite as a partial replacement for cement on the strength of clay soils was experimentally evaluated. The effect of various design parameters, such as cement replacement level and curing time, on the stability of clays was investigated using an advanced technique called the ultrasonic pulse velocity (UPV) test. Furthermore, a simple mathematical model was proposed based on the experimental results to help engineers design the stabilization plan and timely decide about the next steps of the construction process. [ABSTRACT FROM AUTHOR]

New ways to apply sustainable materials, such as biomass components, are essential for reducing dependence on fossil fuels. This work investigated the engineering properties of unsaturated expansive subgrade soils stabilized by bio-based energy coproducts containing lignin. Lignin is a waste by-product of the paper and pulp industry that is frequently burned. Highway subgrade could consume lignin as an environmentally benign, low-cost, and energy-efficient chemical substance for soil stabilization. Swell and shrink behavior of expansive subgrade soils complicates highway construction and causes damage to existing highways. However, research on the hydromechanical properties and volume change behavior of lignin-stabilized expansive soil is limited, and better insight is required into its unsaturated behavior for safe and economical pavement design practices. In this research, a series of geotechnical laboratory tests were conducted to characterize expansive subgrade soils treated with lignin by determining the Atterberg limits, compaction and consolidation behaviors, swelling characteristics, and water retention properties. The mechanisms influencing the changes in engineering properties of lignin-treated expansive soils were further investigated using soil pH, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy analysis. The study shows that the optimal lignin content contributed to an acceptable degree of soil stabilization. The lignin-based cementing material effectively bonds soil particles together and fills pores, thereby preventing water infiltration into the soil and reducing the swell–shrink potential of stabilized soils. [ABSTRACT FROM AUTHOR]

The present work aims to evaluate expansive soil stabilization using different additives. Twenty soil mixtures consisting of 10%, 20%, 25%, and 30% zeolitic tuff (ZT) with 2%, 4%, and 6% lime in various combinations were used to stabilize the soil for pavement subbase application. A comprehensive test program, including Atterberg's limits, compaction, unconfined compression strength (UCS), California Bearing Ratio (CBR), resilient modulus, and permanent deformation, was performed on natural and stabilized soil specimens. Scanning electron microscopy (SEM) supplied with energy-dispersive X-ray spectroscopy (SEM/EDX) was used to confirm the study findings. Adding ZT increases the availability of the silica and alumina needed for the pozzolanic reaction; test results revealed that adding ZT increases the maximum dry unit weight, CBR, UCS, resilient modulus, decreases plasticity, and permanent deformation. As such, ZT can improve the physical and mechanical properties of lime-stabilized soil as a pavement's subgrade and subbase layers. [ABSTRACT FROM AUTHOR]

This study investigated the different geotechnical characteristics of soil stabilization with the addition of lime and rice husk ash (RHA) in varying amounts (3%, 5%, 7%, and 9% lime, and 4%, 8%, 12%, and 16% RHA). A series of compaction, unconfined compressive strength (UCS), California bearing ratio (CBR), pH, and X-ray diffraction (XRD) tests were performed in the laboratory to assess the impact of the considered admixtures on the stabilized soil parameters. This study also proposes the successful integration of an artificial neural network (ANN) and a Gaussian process regression (GPR) with the experimental UCS observations. The lime concentration, RHA concentration, and curing period were considered as the input parameters, and UCS was considered as the response. The proposed framework was extended to analyze the compressive behavior of treated soil on the minuscule level. Such coupled machine learning-based experimental investigation can provide deep insight into the soil behavior which otherwise would have remained unexplored due to the prohibitive nature of performing laboratory experiments on a large scale. The findings demonstrated the effectiveness of RHA in addition to lime in stabilizing the considered expansive soil. With the addition of lime and RHA mix, the UCS and CBR values of the treated soil increased significantly. [ABSTRACT FROM AUTHOR]