Search

Lookup table (LUT) is an efficient digital predistortion technique for mitigating the pattern dependent distortion in the field of underwater wireless optical communication (UWOC) system. However, the complexity of LUT grows geometrically when applied with high-order QAM modulation formats with multi-pattern length sequences. The complexity reduction of LUT is essential for practical applications. In this paper, we study the patterning effects of LUT predistortion and propose to reduce the LUT complexity by pruning its table entries aided with multi-modulus weighted strategy. The size of LUT has been reduced significantly in experiments, which shows that the complexity of the proposed MMW-RLUT only accounts for 17.6%, 9.8%, 4.9% and 14% of full-size LUT for 64QAM, normal 32QAM, square geometrical shaping (SGS) 32QAM and 16QAM modulated UWOC system, without degradation of performance. [ABSTRACT FROM AUTHOR]

Semiconductor optical amplifier (SOA) is regarded as a promising candidate to amplify the optical signal in next-generation access network, especially for O-band signal transmission. However, the SOA-based system suffers from the pattern-dependent effect due to its gain saturation. Compared to digital signal processing (DSP) at receiver, DSP in the transmitter can reduce implementation complexity, which is attractive for the multi-user system. In this paper, we propose three methods to mitigate the pattern-dependent effect in SOA and compare their performance based on: 1) look-up-table (LUT) considering pattern-dependent effect, 2) pre-distortion without considering pattern-dependent effect, 3) probabilistic shaping (PS). The performance of three mitigation methods is investigated in an intensity modulation with direct detection (IM/DD) 4-ary pulse-amplitude-modulation (PAM-4) transmission system at O-band. Our research results show that all these schemes can improve the receiver dynamic range of PAM-4 signals at 50 Gbit/s and 100 Gbit/s. Moreover, PS and LUT can also improve the receiver dynamic range of 75-Gbit/s PAM-8 signals. [ABSTRACT FROM AUTHOR]

We present high-speed single-channel discrete multitone (DMT) operations of directly modulated 850-nm vertical-cavity surface-emitting lasers (VCSEL). Successful transmission of 135 Gb/s over 10 m of OM4 multi-mode fiber (MMF) and 114 Gb/s over 550 m is demonstrated below the 7 % overhead hard-decision forward error correction (FEC) bit error rate (BER) limit. At higher BER limits, i.e. 20%overhead soft-decision FEC, which are of arising interest for these high-speed short-range links, data rates of up to 161 Gb/s are presented. This is enabled by high-bandwidth low-noise VCSEL, which operate in quasi-single mode to overcome the mode dispersion limitations of the MMF. The applied modulation format is DMT in combination with a Volterrafilter- based pre-distortion approach, which pre-compensates the linear and nonlinear behavior of the transmission system, primarily the digital-analog converter, the VCSEL, the MMF, and the photoreceiver. Furthermore, a detailed investigation of the predistortion is given by experimental means, showing that the optimum amount of pre-distortion depends on the applied components and the signal bandwidth. This makes it challenging to predict the optimum; however, a pure electrical pre-distortion offers already a fair gain in performance. [ABSTRACT FROM AUTHOR]

Data-dependent channel cross-modulation (XM) in multiband radio-over-fiber (RoF) systems have been investigated and illustrated for the first time. Nonlinear XM behaviors induced by a Mach-Zehnder modulator (MZM), including the intra-band XM between in-phase (I) and quadrature (Q) components of vector signals, as well as the inter-band XM between multiple bands of scalar/vector signals, have been studied by a closed-form theoretical analysis, and validated by experimental measurements. Consistent results have been obtained by both theoretical and experimental investigations. It was demonstrated that scalar signals only suffer from inter-band XM; whereas vector signals suffer from both intra- and inter-band XMs. Intra-band XM induces constellation compression distortion to vector signals, while inter-band XM induces eye-diagram degradation to scalar signals, and constellation scaling distortion to vector signals. To mitigate the signal distortions induced by data-dependent XM, arcsine pre-distortion technique was implemented to compensate the nonlinear response of MZM. Effective cancellations of both intra- and inter-band XM were achieved. [ABSTRACT FROM PUBLISHER]