Search

In Dempster-Shafer theory, belief structure plays a key role, which provides a useful framework for information representation of uncertain variables. Basic Probability Assignment (BPA) is the most important component, which is difficult to be determined due to the uncertainty of information. Generally, there are two ways to get BPA of evidential theory: One is a subjective judgment of the expert’s experience, Interval Belief Structure (IBS) can solve the fuzziness and uncertainty of expert’s judgment. The other is an objective calculation by sampling existing data, in which BPA is viewed as the point estimate. Therefore, one of the contributions of this paper is that the definitions and theories of Confidential Interval Belief Structure (CIBS) is developed to describe BPA in Dempster-Shafer theory, which can give a range of population parameter values and contain more information to deal with the uncertainty and fuzziness of existing data. And then, based on evidential reasoning rule for counter-intuitive behavior, another contribution of this paper is that the extended evidential reasoning approach with CIBS is proposed to obtain the combined belief degree. The proposed method can be flexibly adjusted by appropriate errors and confidence levels, which is the main advantage. Finally, a case of sustainable operation of Shanghai rail transit system to verify the feasibility of proposed method and great performance of the extended method is shown.

Iris segmentation is one of the most important steps in iris recognition. The current iris segmentation network is based on convolutional neural network (CNN). Among these methods, there are still problems with the segmentation networks such as high complexity, insufficient accuracy, etc. To solve these problems, an improved low complexity DenseUnet is proposed to this paper based on U-net for acquiring a high-accuracy iris segmentation network. In this network, the improvements are as follows: (1) Design a dense block module that contains five convolutional layers and all convolutions are dilated convolutions aimed at enhancing feature extraction; (2) Except for the last convolutional layer, all convolutional layers output feature maps are set to the number 64, and this operation is to reduce the amounts of parameters without affecting the segmentation accuracy; (3) The solution proposed to this paper has low complexity and provides the possibility for the deployment of portable mobile devices. DenseUnet is used on the dataset of IITD, CASIA V4.0 and UBIRIS V2.0 during the experimental stage. The results of the experiments have shown that the iris segmentation network proposed in this paper has a better performance than existing algorithms.

Data envelopment analysis (DEA) is widely used to evaluate the performance of a group of homogeneous decision making units (DMUs). Considering the uncertainty, interval DEA has been introduced to fit into more situations. In this paper, an interval efficiency method based on slacks-based measure is proposed to solve the uncertain problems in DEA. Firstly, the maximum and minimum efficiency values of the evaluated DMU are calculated by the furthest and closest distance from the evaluated DMU to the projection points on the Pareto-efficient frontier, respectively. Then, the AHP method is used for the full ranking of DMUs. The paper uses the pairwise comparison relationship between each pair of DMUs to construct the interval multiplicative preference relations (IMPRs) matrix. If the matrix does not meet the consistency condition, a method to obtain consistency IMPRs is introduced. According to the consistency judgment matrix, the full ranking of DMUs can be obtained. Finally, we apply our method to the performance evaluation of 12 tourist hotels in Taipei in 2019.

In recent years, the research on object detection has been intensified. A large number of object detection results are applied to our daily life, which greatly facilitates our work and life. In this paper, we propose a more effective object detection neural network model ENHANCE_YOLOV4. We studied the effects of several attention mechanisms on YOLOV4, and finally concluded that spatial attention mechanism had the best effect on YOLOV4. Therefore, based on previous studies, this paper introduces Dilated Convolution and one-by-one convolution into the spatial attention mechanism to expand the receptive field and combine channel information. Compared with CBAM and BAM, which are composed of spatial attention and channel attention, this improved spatial attention module reduces model parameters and improves detection capabilities. We built a new network model by embedding improved spatial attention module in the appropriate place in YOLOV4. And this paper proves that the detection accuracy of this network structure on the VOC data set is increased by 0.8%, and the detection accuracy on the coco data set is increased by 7%when the calculation performance is increased a little.

Deep neural networks (DNNs) are vulnerable to adversarial examples, which are crafted by adding small, human-imperceptible perturbations to the original images, but make the model output inaccurate predictions. Before DNNs are deployed, adversarial attacks can thus be an important method to evaluate and select robust models in safety-critical applications. However, under the challenging black-box setting, the attack success rate, i.e., the transferability of adversarial examples, still needs to be improved. Based on image augmentation methods, this paper found that random transformation of image brightness can eliminate overfitting in the generation of adversarial examples and improve their transferability. In light of this phenomenon, this paper proposes an adversarial example generation method, which can be integrated with Fast Gradient Sign Method (FGSM)-related methods to build a more robust gradient-based attack and to generate adversarial examples with better transferability. Extensive experiments on the ImageNet dataset have demonstrated the effectiveness of the aforementioned method. Whether on normally or adversarially trained networks, our method has a higher success rate for black-box attacks than other attack methods based on data augmentation. It is hoped that this method can help evaluate and improve the robustness of models.

In this paper, we presents an apporch for real-world human face close-up images cartoonization. We use generative adversarial network combined with an attention mechanism to convert real-world face pictures and cartoon-style images as unpaired data sets. At present, the image-to-image translation model has been able to successfully transfer style and content. However, some problems still exist in the task of cartoonizing human faces:Hunman face has many details, and the content of the image is easy to lose details after the image is translated. the quality of the image generated by the model is defective. The model in this paper uses the generative adversarial network combined with the attention mechanism, and proposes a new generative adversarial network combined with the attention mechanism to deal with these problems. The channel attention mechanism is embedded between the upper and lower sampling layers of the generator network, to avoid increasing the complexity of the model while conveying the complete details of the underlying information. After comparing the experimental results of FID, PSNR, MSE three indicators and the size of the model parameters, the new model network proposed in this paper avoids the complexity of the model while achieving a good balance in the conversion task of style and content.

Person identification using biometric features is an effective method for recognizing and authenticating the identity of a person. Multimodal biometric systems combine different biometric modalities in order to make better predictions as well as for achieving increased robustness. This paper proposes a touchless multimodal person identification model using deep learning techniques by combining the gait and speech modalities. Separate pipelines for both the modalities were developed using Convolutional Neural Networks. The paper also explores various fusion strategies for combining the two pipelines and shows how various metrics get affected with different fusion strategies. Results show that weighted average and product fusion rules work best for the data used in the experiments.

PMU can directly measure positive sequence voltage, phase and system frequency. In this paper, the design and implementation for optimum placement of PMU in power system network (PSN) has been performed using 5 different intelligent approaches at an emulation platform. Different case studies based on IEEE 7, 14 and 30 bus system have been performed and analyzed. In the studies, PMU device is used for the measurement of voltage and current magnitude as well as its phase and its performance has been compared with measured real signals of PSN. PMU measurement gives the accurate results and reliability to PSN. But PMUs are not economical, so PSN operator needs to install a minimum number of PMU in PSN so that system should be fully observable in a real-time scenario. In this paper for optimal placement of PMU, five different intelligent methods have been analyzed for three different bus systems and obtained results are compared. For the further validation of selected PMUs for the PSN, a state estimation using WLS algorithm has been performed using conventional data and PMU data on IEEE14 and IEEE30 bus systems. The obtained results for voltage estimation error and phase estimation error with and without PMU data are compared.

This paper presents a Hybrid Feature Selection Technique for Sentiment Classification. We have used a Genetic Algorithm and a combination of existing Feature Selection methods, namely: Information Gain (IG), CHI Square (CHI), and GINI Index (GINI). First, we have obtained features from three different selection approaches as mentioned above and then performed the UNION SET Operation to extract the reduced feature set. Then, Genetic Algorithm is applied to optimize the feature set further. This paper also presents an Ensemble Approach based on the error rate obtained different domain datasets. To test our proposed Hybrid Feature Selection and Ensemble Classification approach, we have considered four Support Vector Machine (SVM) classifier variants. We have used UCI ML Datasets of three domains namely: IMDB Movie Review, Amazon Product Review and Yelp Restaurant Reviews. The experimental results show that our proposed approach performed best in all three domain datasets. Further, we also presented T-Test for Statistical Significance between classifiers and comparison is also done based on Precision, Recall, F1-Score, AUC and model execution time.

For estimation of the RUL (Remaining useful life) of Lithium ion battery we are required to do its health assessment using online facilities. For identifying the health of a battery its internal resistance and storage capacity plays the major role. However the estimation of both these parameters is not an easy job and requires lot of computational work to be done. So to overcome this constraint an easy alternate way is simulated in the paper through which we can estimate the RUL. For formation of a linear relationship between health index of the battery (HI) and its actual capacity used of power transformation method is done and later on to validate the result a comparison study is done with Pearson & Spearman methods. Transformed value of Health Index is used for developing a neural network. The results demonstrated in the paper shows the feasibility of the proposed technique resulting in great saving of time

Smart city has come a long way since the development of emerging technology like Information and communications technology (ICT), Internet of Things (IoT), Machine Learning (ML), Block chain and Artificial Intelligence. The Intelligent Transportation System (ITS) is an important application in a rapidly growing smart city. Prediction of the automotive accident severity plays a very crucial role in the smart transportation system. The main motive behind this research is to determine the specific features which could affect vehicle accident severity. In this paper, some of the classification models, specifically Logistic Regression, Artificial Neural network, Decision Tree, K-Nearest Neighbors, and Random Forest have been implemented for predicting the accident severity. All the models have been verified, and the experimental results prove that these classification models have attained considerable accuracy. The paper also explained a secure communication architecture model for secure information exchange among all the components associated with the ITS. Finally paper implemented web base Message alert system which will be used for alert the users through smart IoT devices.

In this paper, a novel hybrid approach for deterministic and probabilistic occupancy detection is proposed with a novel heuristic optimization and Back-Propagation (BP) based algorithms. Generally, PB based neural network (BPNN) suffers with the optimal value of weight, bias, trapping problem in local minima and sluggish convergence rate. In this paper, the GSA (Gravitational Search Algorithm) is implemented as a new training technique for BPNN is order to enhance the performance of the BPNN algorithm by decreasing the problem of trapping in local minima, enhance the convergence rate and optimize the weight and bias value to reduce the overall error. The experimental results of BPNN with and without GSA are demonstrated and presented for fair comparison and adoptability. The demonstrated results show that BPNNGSA has outperformance for training and testing phase in form of enhancement of processing speed, convergence rate and avoiding the trapping problem of standard BPNN. The whole study is analyzed and demonstrated by using R language open access platform. The proposed approach is validated with different hidden-layer neurons for both experimental studies based on BPNN and BPNNGSA.

This paper proposes an energy scheduling mechanism among multiple microgrids (MGs) and also within the individual MGs. In this paper, electric vehicle (EV) energy scheduling is also considered and is integrated in the operation of the microgrid (MG). With the advancements in the battery technologies of EVs, the significance of Vehicle-to-Grid (V2G) is increasing tremendously. So, designing the strategies for energy management of electric vehicles (EVs) is of paramount importance. The battery degradation cost of an EV is also taken into account. Vickrey second price auction is used for truthful bidding. To enhance the security and trust, blockchain technology can be incorporated. The market is shifted to decentralized state by using blockchain. To encourage the MGs to generate more, contribution index is allotted to each prosumer of a MG and to the MGs as a whole, depending on which priority is given during auction. The system was simulated using IEEE 118 bus feeder which consists of 5 MGs, which in turn contain EVs and prosumers.

This paper proposed a hybrid intelligent approach based on empirical mode decomposition (EMD), artificial neural network (ANN) and J48 algorithm of machine learning for real-time harmonics analysis of digital substation’s equipment based on IEC-61850 using explanatory input variables based on laboratory proto-type real-time recorded database. In the proposed hybrid model, these variables are first extracted then diagnostic of power transformer harmonics of digital substation is evaluated/analyzed to perform the long term as well as the short term goal and planning in the electrical power network. In this paper, firstly, experimental analysis is performed to validate the laboratory prototype setup using FFT (fast Fourier transform), STFT (short-time Fourier transform) and CWT (continuous wavelet transform). Then, features are extracted from experimental dataset using EMD (empirical mode decomposition) method. The IMFs (intrinsic mode functions) have generated from EMD, which are used as an input variable to the two different diagnostic models, i.e., ANN and J48 algorithm. In order to validate the performance and accuracy of the proposed hybrid model, a comparative analysis is performed by using ANN and J48 method (with and without EMD method) and the results are compared. Obtained results shows that the proposed hybrid diagnostics approach for harmonics analysis has outperformance characteristics.

In the field of data analysis clustering is considered to be a major tool. Application of clustering in various field of science, has led to advancement in clustering algorithm. Traditional clustering algorithm have lot of defects, while these defects have been addressed but no clustering algorithm can be considered as superior. A new approach based on Kernel Fuzzy C-means clustering using teaching learning-based optimization algorithm (TLBO-KFCM) is proposed in this paper. Kernel function used in this algorithm improves separation and makes clustering more apprehensive. Teaching learning-based optimization algorithm discussed in the paper helps to improve clustering compactness. Simulation using five data sets are performed and the results are compared with two other optimization algorithms (genetic algorithm GA and particle swam optimization PSO). Results show that the proposed clustering algorithm has better performance. Another simulation on same set of data is also performed, and clustering results of TLBO-KFCM are compared with teaching learning-based optimization algorithm with Fuzzy C- Means Clustering (TLBO-FCM).

Ball and beam is a popular benchmark problem in control engineering. Various control strategies have been proposed on ball & beam system in literature, In this paper, hybrid optimization algorithms have been implemented on PID controller to control ball position and beam angle. Hybrid algorithms combine exploration and exploitation ability of individual algorithm and find optimized value of performance index. In this paper, two hybrid algorithms namely PSO-GSA and PSO-GWO are used to tune controller parameters which in turn improve the system performance. Simulation results show effective and efficient improvement in system performance with these hybrid algorithms. To analyze the performance of these algorithms, time domain parameters and mean square error (MSE) has been taken as performance index. A comparative study of these algorithms with that of individual algorithms namely PSO, GWO, GSA has also been done.

Digitalization is the key trend of the Industry 4.0 revolution. Industrial companies are transforming the way they design and maintain their products and solutions. The user requirements become more demanding. Competition among the manufacturing companies is at its limits and transforms the products to be more complex. Yet, other challenges such as faster time to market, higher quality requirements and legislation force enterprises to provide new ways of design, manufacture and service their end products. Product Lifecycle Management (PLM) is a key solution to track the entire lifespan of the product from idea to design, design to manufacture and manufacture to service. Besides the complexity of products and production, the selection of the right PLM solution which will become the backbone of enterprises is an open problem. In this paper, a thorough literature review is conducted to analyze the most important features for selecting the right PLM solution for manufacturing firms. Moreover, to overcome the challenge of decision makers’ (DM) subjective judgments, a novel interval value spherical fuzzy COPRAS (IVSF-COPRAS) multi-criteria decision making (MCDM) method is introduced. The paper aims to help enterprises rapidly identify the best alternative vendor/solution to be selected based on the need of the organization. In order to show the applicability, DM inputs are collected from a leading defense company where the PLM selection process is ongoing. The industrial case study is provided to demonstrate the success of the proposed selection framework.

In addition to the well-known fuzzy sets, a novel type of fuzzy set called spherical fuzzy set (SFS) is recently introduced in the literature. SFS is the generalized structure over existing structures of fuzzy sets (intuitionistic fuzzy sets-IFS, Pythagorean fuzzy sets-PFS, and neutrosophic fuzzy sets-NFS) based on three dimensions (truth, falsehood, and indeterminacy) to provide a wider choice for decision-makers (DMs). Although the SFS has been introduced recently, the topic attracts the attention of academicians at a remarkable rate. This study is the expanded version of the authors’ earlier study by Ozceylan et al. [1]. A comprehensive literature review of recent and state-of-the-art papers is studied to draw a framework of the past and to shed light on future directions. Therefore, a systematic review methodology that contains bibliometric and descriptive analysis is followed in this study. 104 scientific papers including SFS in their titles, abstracts and keywords are reviewed. The papers are then analyzed and categorized based on titles, abstracts, and keywords to construct a useful foundation of past research. Finally, trends and gaps in the literature are identified to clarify and to suggest future research opportunities in the fuzzy logic area.

An analysis of the scientific literature on project cash flow control and fuzzy modelling shows that project cash flows are modelled using only basic approaches drawn from fuzzy theory, which may distort the credibility of the model. In this paper, we therefore propose to use the whole spectrum of fuzzy arithmetic, and to select operations that suit the nature of the cash flows in question, their dependencies and the preferences of the project manager. An analysis of the literature also shows that in practically all existing models of project costs and cash flow management, project costs and cash flows are treated at a very high level of generality (without considering the various types of project, factors influencing their variability and signals warning of imminent cash-related problems), and estimations are not updated on an ongoing basis throughout the duration of the project. The results of a survey performed with the participation of 100 project managers show that this simplistic view of project cash flows may be distorting, and cannot guarantee the development of an efficient project cost and cash flow control system. We propose an approach that at least partially compensates for these drawbacks: it differentiates between types of project cash flows and the factors and triggers affecting changes in cash flows. Two case studies are used for a an initial verification of the approach. The paper concludes with suggestions for further research perspectives.

Process capability analysis (PCA) is a tool for measuring a process’s ability to meet specification limits (SLs), which the customers define. Process capability indices (PCIs) are used for establishing a relationship between SLs and the considered process’s ability to meet these limits as an index. PCA compares the output of a process with the SLs through these capability indices. If the customers’ needs contain vague or imprecise terms, the classical methods are inadequate to solve the problem. In such cases, the information can be processed by the fuzzy set theory. Recently, ordinary fuzzy sets have been extended to several new types of fuzzy sets such as intuitionistic fuzzy sets, Pythagorean fuzzy sets, picture fuzzy sets, and spherical fuzzy sets. In this paper, a new extension of intuitionistic fuzzy sets, which is called penthagorean fuzzy sets, is proposed, and penthagorean fuzzy PCIs are developed. The design of production processes for COVID-19 has gained tremendous importance today. Surgical mask production and design have been chosen as the application area of the penthagorean fuzzy PCIs developed in this paper. PCA of the two machines used in surgical mask production has been handled under the penthagorean fuzzy environment.

The identification and classification of plant diseases is of great significance to ecological protection and deep learning methods have made a great of progress in the common plant diseases identification for specific plant. While faced with the same plant disease of other plants, due to the insufficient or low quality training data, current deep learning methods will be difficult to identify the diseases effectively and accurately. Inspired by the advantages of GAN in dataset expansion, we propose the CycleGAN based confusion model in this paper. In this paper, GAN framework is improved by adding noise label and learn together during training stage, which migrates the data of common plant diseases to the plants with insufficient or low quality data. In order to evaluate the quality of the migrated training dataset among different GAN approaches, we introduce the quality indicators of the migration images such as MMD, FID, EMD etc. We compare our model with other GANs model, and the experimental results show that the proposed model obtains better results in the migration process, which make it more effective for the identification of cross species plant diseases.

A Wireless Sensor Network (WSN) is divided into groups of sensor nodes for efficient transmission of data from the point of measuring to sink. By performing clustering, the network remains energy-efficient and stable. An intelligent mechanism is needed to cluster the sensors and find an organizer node, the cluster head. The organizer node assembles data from its constituent nodes called member nodes, finds an optimal route to the sink of the network, and transfers the same. The nomination of cluster head is crucial since energy utilization is a major challenge of sensor nodes deployed over a hostile environment. In this paper, a fuzzy-based Improved Harris’s Hawk Optimization Algorithm (IHHO) is proposed to select an able cluster head for data communication. The fuzzy inference model ponders balance energy, distance from self to sink node, and vicinity of nodes from cluster head as input factors and decides if a candidate node is eligible for becoming a cluster head. The IHHO tunes the logic into an energy-efficient network with less complexity and more ease. The novelty of the paper lies in applying the hawk-pack technique based on fuzzy rules. Simulations show that the combination of Fuzzy based IHHO reduces the death of nodes through which network lifetime is enhanced.

In Today’s pandemic situation, ‘Spectrum accessing and smart usage’ is the sacred Mantra uttered by every individual citizen in the world. Work from home for techies, online classes for students, games for kids, webinar for teaching fraternity etc., are going almost on indoor coverage without any limit in pace because of the smart spectrum coverage by the network service providers. This paper provides an add-on facility to the existing wireless infrastructure to provide a better user experience in this highly regrettable routine. In this paper, a cognitive domain unused spectrum holes are efficiently handled by (i) adaptive spectrum management technique; (ii) Fuzzy Inference System based spectrum administration and (iii) Hybrid Cognitive Femtocell approaches based on the user demand and their applications. The proposed integrated cognitive femtocell and Fuzzy-based approach reduces the indoor coverage problems and enhances the throughput of the macrocell users by allowing adaptive spectrum management based on the demand, thereby eliminating spectrum underlay and overlay problems during critical conditions. In cognitive femtocell networks, the access points are prepared and installed with Cognitive Radio which can determine spectrum dynamically by macrocells and nearby Femto Access Points. It adjusts its radiating parameters to evade the macrocells’ interferences and the neighbouring femtocells, thereby maximising the spectrum band’s overall utility.

This paper summarizes the relationship of subjective information with artificial intelligence (AI) technology and points out how the role of subjective information and its position in AI. Eventually, the characteristic of digital era is the “softening of the theories and hardening of the experiences”. Subjective information is widely used in digital revolution for transforming the qualitative estimations into quasi-quantitative solutions, such as the empirical methods in decision making for quantitative management, etc., it will be the transferor for realizing it. The theoretical formulation of how subjective information is digitized through “Fuzzy-AI Model” for digital revolution is presented in this paper; it has becoming a universal problem solver of utilizing AI technology for quantizing the degree uncertainties in decision-making and fuzzy estimation. Besides, the “Big Data” searching will heavily depend on the completeness of its source information, yet “subjective information” approach can directly predict human thinking or the internal law of complicated objective events into an explicit digital form, for the completeness of source information to make the correct and comprehensive “Big Data” prediction possible. Practical case studies are presented.

As an advanced machine vision task, traffic sign recognition is of great significance to the safe driving of autonomous vehicles. Haze has seriously affected the performance of traffic sign recognition. This paper proposes a dehazing network, including multi-scale residual blocks, which significantly affects the recognition of traffic signs in hazy weather. First, we introduce the idea of residual learning, design the end-to-end multi-scale feature information fusion method. Secondly, the study used subjective visual effects and objective evaluation metrics such as Visibility Index (VI) and Realness Index (RI) based on the characteristics of the real-world environment to compare various traditional dehazing and deep learning dehazing method with good performance. Finally, this paper combines image dehazing and traffic sign recognition, using the algorithm of this paper to dehaze the traffic sign images under real-world hazy weather. The experiments show that the algorithm in this paper can improve the performance of traffic sign recognition in hazy weather and fulfil the requirements of real-time image processing. It also proves the effectiveness of the reformulated atmospheric scattering model for the dehazing of traffic sign images.

Arabic language has a set of sound letters called diacritics, these diacritics play an essential role in the meaning of words and their articulations. The change in some diacritics leads to a change in the context of the sentence. However, the existence of these letters in the corpus transcription affects the accuracy of speech recognition. In this paper, we investigate the effect of diactrics on the Arabic speech recognition based end-to-end deep learning. The applied end-to-end approach includes CNN-LSTM and attention-based technique presented in the state-of-the-art framework namely, Espresso using Pytorch. In addition, and to the best of our knowledge, the approach of CNN-LSTM with attention-based has not been used in the task of Arabic Automatic speech recognition (ASR). To fill this gap, this paper proposes a new approach based on CNN-LSTM with attention based method for Arabic ASR. The language model in this approach is trained using RNN-LM and LSTM-LM and based on nondiacritized transcription of the speech corpus. The Standard Arabic Single Speaker Corpus (SASSC), after omitting the diacritics, is used to train and test the deep learning model. Experimental results show that the removal of diacritics decreased out-of-vocabulary and perplexity of the language model. In addition, the word error rate (WER) is significantly improved when compared to diacritized data. The achieved average reduction in WER is 13.52%.

Due to the rapid growth in sensor technology and embedded technology, wireless body area network WBANs plays a vital role in monitoring the human body system and the surrounding environment. It supports many healthcare applications on the one hand and are very much help full in pandemic scenarios. It has become the most innovative health care area, which is intriguing to many researchers because of its vast future prospective and potential. Data collected by different wireless sensors or nodes is very personal, critical, and important because of human life involvement. WBANs can minimize human to human contact, which helps stop the spread of severe infectious diseases. The biggest concern is the maintenance of privacy and accuracy of data is still a hot area of research due to nature of attacks, which are changing day by day and increasing, as well as for the sake of better performance. A suitable security mechanism is a way to address above issues, for achieving data security, it is expedient to propose a mechanism. It is essential to update the patient’s regular data. WBANs help to deliver truthful reports related to the patient’s health regularly and individually. This paper proposes an algorithm that shows a better result than the existing algorithm in their previous works. This work is all about proposing a mechanism which needs comparatively less resource. Only authentic entities can interact with the server, which has become obligatory for both sides, keeping data safe. Several authentication schemes have been proposed or discussed by different researchers. This paper has proposed a Secure and Efficient WBANs Authentication Mechanism (SEAM). This security framework will take care of the authentication and the security of transmitted data.

In this paper, we propose a frequency domain data hiding method for the JPEG compressed images. The proposed method embeds data in the DCT coefficients of the selected 8 × 8 blocks. According to the theories of Human Visual Systems (HVS), human vision is less sensitive to perturbation of pixel values in the uneven areas of the image. In this paper we propose a Singular Value Decomposition based image roughness measure (SVD-IRM) using which we select the coarse 8 × 8 blocks as data embedding destinations. Moreover, to make the embedded data more robust against re-compression attack and error due to transmission over noisy channels, we employ Turbo error correcting codes. The actual data embedding is done using a proposed variant of matrix encoding that is capable of embedding three bits by modifying only one bit in block of seven carrier features. We have carried out experiments to validate the performance and it is found that the proposed method achieves better payload capacity and visual quality and is more robust than some of the recent state-of-the-art methods proposed in the literature.

Human communication is not limited to verbal speech but is infinitely more complex, involving many non-verbal cues such as facial emotions and body language. This paper aims to quantitatively show the impact of non-verbal cues, with primary focus on facial emotions, on the results of multi-modal sentiment analysis. The paper works with a dataset of Spanish video reviews. The audio is available as Spanish text and is translated to English while visual features are extracted from the videos. Multiple classification models are made to analyze the sentiments at each modal stage i.e. for the Spanish and English textual datasets as well as the datasets obtained upon coalescing the English and Spanish textual data with the corresponding visual cues. The results show that the analysis of Spanish textual features combined with the visual features outperforms its English counterpart with the highest accuracy difference, thereby indicating an inherent correlation between the Spanish visual cues and Spanish text which is lost upon translation to English text.

Aiming at the problem of high cost in cold chain logistics of fresh products home-delivery in supermarket chain in the new retail era, the paper constructs the model of Location Inventory Routing Problem (LIRP) optimization in Satellite Warehouse mode in view of customer satisfaction with the broken line soft time windows. The model minimizes the total cost of the cold chain logistics system of supermarket chain through the location allocation, inventory optimization, the determination of distribution service relationship between Satellite Warehouse and customer, and the constraint of time penalty cost. Then, the paper designed an improved ant colony optimization to solve the LIRP model of supermarket chain. Finally, the simulation in MATLAB verifies and analyzes the validity of the model and algorithm. Therefore, LIRP optimization model in Satellite Warehouse mode can effectively improve the operational efficiency of fresh products home-delivery in the supermarket chain and thus reduce the logistics cost.

In order to better meet customer needs and respond to market demands more quickly, mounting number of manufacturing companies have begun to bid farewell to the traditional unitary manufacturing model. The collaborative manufacturing model has become a widely adopted manufacturing model for manufacturing companies. Aiming at the problem of partner selection for collaborative manufacturing of complex products in a collaborative supply chain environment, this paper proposes a multi-objective decision-making model that comprehensively considers the maximization of the matching degree of manufacturing capacity and the profits of supply chain, and gives the modeling process and application steps in detail. The method first uses fuzzy theory to evaluate the manufacturing capabilities of candidate collaborative manufacturing partners. Secondly, Vector Space Model (VSM) is used to calculate the matching degree of manufacturing capacity and manufacturing demand. Then, the paper studied the profit of the supply chain under the “non-cooperative” mechanism and the “revenue sharing” mechanism. Furthermore, the decision-making model is established. Finally, a simulation was carried out by taking complex product manufacturing of Gree enterprise as an example. The research results show the feasibility and effectiveness of the method.

As a new business model, crowdsourcing innovation is widely used for enterprises to complete innovation tasks by the external crowds. The enterprises, the external crowds, and the crowdsourcing platform make an alliance and co-create value to achieve the multi-win goal. Based on the operation process analysis of the third-party platform crowdsourcing innovation model, this paper proposes that the essence of crowdsourcing innovation is the value co-creation of multi-agent participation. Based on grounded theory, this paper constructs the theoretical model of the realization mechanism of multi-agent participation value co-creation in crowdsourcing innovation from the three parties’ perspective. This research finds that value co-creation factors include six factors: task attributes, incentive mechanisms, trust mechanisms, the platform supports, participation motivation, and diversities. The process of value co-creation includes resource integration and interaction. The results of value co-creation include three elements: innovation value, knowledge value, and relationship value.

If robot uses 2D lidar or binocular camera to locate obstacles, there will be some problems such as missing obstacle information or inaccurate obstacle locating, which will affect the normal work of the robot. In order to obtain accurate 3D obstacle information, this paper proposes an algorithm for fusing 2D lidar and binocular vision to complete the obstacle location. In this paper, the depth value of the 2D lidar point cloud is used as a benchmark. By fitting the error equation of the binocular camera point cloud depth value, the depth value of the camera point cloud is modified to obtain an accurate 3D camera point cloud, thereby obtaining an accurate 3D obstacle information. Many experiments have proved that the fusion algorithm of 2D lidar and binocular vision can obtain accurate 3D obstacle information. The method of fusion 2D lidar and binocular vision can approximately achieve the measurement effect of 3D lidar, and the point cloud of obstacles is relatively dense, so the accurate 3D obstacle information can be obtained. This method can reduce the influence of single sensor on the robot locating obstacles, thus completing the accurate locating of obstacles, which is of certain significance to robot navigation.

Water resources is an important basic energy. The determination of weights is one of the important indexes in water resources evaluation system and reasonable allocation of weights is the key to quantitative evaluation. In order to establish a scientific evaluation index system of the influence of mining disturbance on water resources for purpose of a more reliable and effective evaluation result and realizing the protection of water resources system, a comprehensive evaluation system of water resources based on PSO-AHP model is proposed in the paper. Combined with the specific geological environment characteristics of mines, this paper establishes a four-level evaluation index system after identifying the factors affecting water resources and ecological environment. By applying the particle swarm optimization (PSO) to the analytic hierarchy process (AHP) and fuzzy comprehensive evaluation method, a PSO-AHP model and then a fitness function are constructed to solve and optimize the weight values in the evaluation index system, and the calculated weight values are checked by consistency checking method. The evaluation results suggest that the index system can accurately reflect the impact of mining on water resources and water ecological environment and etc., providing certain reference value for sewage resourcing and reducing the harmful effect on environment by sewage discharge.

In the production process of lithium battery, the quality inspection requirements of lithium battery are very high. At present, most of the work is done manually. Aiming at the problem of large manual inspection workload and large error, the robot visual inspection technology is applied to the production of lithium battery. In recent years, with the rapid development and progress of science and technology, the rapid development of visual detection hardware and algorithms, making it possible to screen defective products through visual detection algorithms. This paper takes lithium battery as the research object, and studies its vision detection algorithm. As a common commodity, the quality of lithium battery is the key for users to choose. With the increasing requirements of users for battery quality, how to produce high-quality battery is the key problem to be solved by manufacturers. However, at present, the defects of battery surface are mostly carried out manually. There are low efficiency and low detection rate in the process of manual detection. In this paper, the visual detection algorithm is studied to detect the defects such as pits, rust marks and broken skin on the surface of lithium battery, specifically to design the imaging experimental platform of lithium battery; use different lighting schemes to design different battery positioning and extraction algorithms; use Hough detection method to locate the battery surface, and design the battery defect algorithm for this, and compare the algorithm through experiments.

In server clusters, the static scheduling algorithm has superior performance when the user visits are relatively stable. In the face of sudden increase in user traffic, the dynamic scheduling algorithm has a better load balancing effect than the static scheduling algorithm. However, in the face of complex network environments, the static scheduling algorithm cannot adjust the load according to the performance of the server in real time. The dynamic scheduling algorithm using a single weight to evaluate server performance is unreliable, and load scheduling with reference to the number of connections has uncertainty. In view of this problem, this paper proposes a cluster load balancing algorithm based on dynamic consistent hash based on the study of load balancing based on LVS clusters. By analyzing the performance and load parameters, we divide the request process into in-cycle and out-of-cycle. By setting up the LVS cluster system, the performance weights, load parameters, number of virtual nodes and cycles of the algorithm in this paper are determined experimentally. Finally, the response time and throughput of the algorithm in this paper are compared with the WRR algorithm and WLC algorithm. The results show that the time and throughput of this algorithm are better than WRR algorithm and WLC algorithm.

In the deep learning-based video action recognitio, the function of the neural network is to acquire spatial information, motion information, and the associated information of the above two kinds of information over an uneven time span. This paper puts forward a network extracting video sequence semantic information based on deep integration of local Spatial-Temporal information. The network uses 2D Convolutional Neural Network (2DCNN) and Multi Spatial-Temporal scale 3D Convolutional Neural Network (MST_3DCNN) respectively to extract spatial information and motion information. Spatial information and motion information of the same time quantum receive 3D convolutional integration to generate the temporary Spatial-Temporal information of a certain moment. Then, the Spatial-Temporal information of multiple single moments enters Temporal Pyramid Net (TPN) to generate the local Spatial-Temporal information of multiple time scales. Finally, bidirectional recurrent neutral network is used to act on the Spatial-Temporal information of all parts so as to acquire the context information spanning the length of the entire video, which endows the network with video context information extraction capability. Through the experiments on the three video action recognitio common experimental data sets UCF101, UCF11, UCFSports, the Spatial-Temporal information deep fusion network proposed in this paper has a high correct recognition rate in the task of video action recognitio.

Influence maximization is a classic network optimization problem, which has been widely used in the field of viral marketing. The influence maximization problem aims to find a fixed number of active nodes. After a specific propagation model, the number of active nodes reaches the maximum. However, the existing influence maximization algorithms are overly pursuing certain indicators of efficiency or accuracy, which cannot be well accepted by some researchers. This paper proposes an effective algorithm to balance the accuracy and efficiency of the influence maximization problem called local two-hop search algorithm (LTHS). The core of the proposed algorithm is a node not only be affected by one-hop neighbor nodes, but also by two-hop neighbor nodes. Firstly, this paper selects initial seed nodes according to the characteristics of the node degree. Generally, the high degree of nodes regards as influential nodes. Secondly, this paper proposes a node two-hop influence evaluate function called two-hop diffusion value (THDV), which can evaluate node influence more accurately. Furthermore, in order to seek higher efficiency, this paper proposes a method to reduce the network scale. This paper conducted full experiments on five real-world social network datasets, and compared with other four well-known algorithms. The experimental results show that the LTHS algorithm is better than the comparison algorithms in terms of efficiency and accuracy.

In recent years, the problem of complex multi-attribute group decision-making (MAGDM) in uncertain environments has received increasing attention. In evaluating MAGDM problems, obtaining the objective attribute weights is very important. Considering the excellent performance of intuitive fuzzy linguistic sets in dealing with uncertain information, this paper introduces a new interval-valued intuitionistic pure linguistic entropy weight (IVIPLEW) method for determining attribute weights and evaluating MAGDM problems. The IVIPLEW method considers the cases of missing values, and uses the conventional interval-valued intuitionistic pure linguistic (IVIPL) expectations to supplement the missing values. This method of dealing with missing values not only considers the expectations of experts, but also prevents fluctuations in linguistic variables from impacting the decision results. This paper establishes an analysis framework that allows the IVIPLEW method to be applied to MAGDM problems, and presents a practical case study that illustrates the practicality and effectiveness of IVIPLEW. The results are quite satisfactory. The effectiveness of the proposed method is demonstrated through a comparison with the IVIPL information aggregation method. Furthermore, the robustness of the IVIPLEW method is verified through a sensitivity analysis. The results presented in this paper show that the IVIPLEW method is applicable to a wide range of MAGDM problems.

A normal wiggly hesitant fuzzy set is a very useful tool to mine the potential uncertain information given by decision makers, which is considered as an extension of hesitant fuzzy set and can improve the effectiveness of decision making. Power average operator can relieve the impact on decision result of unreasonable data, and the generalized Maclaurin symmetric mean operator (GMSM) is an extension of Maclaurin symmetric mean operator with wider range of applications, which can consider the relationship among decision attributes. By integrating the advantages of them, in this paper, we develop the normal wiggly hesitant fuzzy power GMSM (NWHFPGMSM) operator and its weighted form based on the distance measure of two normal wiggly hesitant fuzzy elements, then we further discuss their properties and some special cases. Thus, a new multi-attribute decision making method based on the NWHFPGMSM operator under normal wiggly hesitant fuzzy environment is proposed. Finally, we select some examples to illustrate the effectiveness and superiority of the proposed method in this paper through comparison and analysis with other methods.

To enable a quick and accurate access of targeted scientific and technological literature from massive stocks, here a deep content-based collaborative filtering method, namely DeepCCF, for personalized scientific and technological literature resources recommendation was proposed. By combining content-based filtering (CBF) and neural network-based collaborative filtering (NCF), the approach transforms the problem of scientific and technological literature recommendation into a binary classification task. Firstly, the word2vec is used to train the words embedding of the papers’ titles and abstracts. Secondly, an academic literature topic model is built using term frequency–inverse document frequency (TF-IDF) and word embedding. Thirdly, the search and view history and published papers of researchers are utilized to construct the model that portrays the interests of researchers. Deep neural networks (DNNs) are then used to learn the nonlinear and complicated high-order interaction features between users and papers, and the top k recommendation list is generated by predicting the outputs of the model. The experimental results show that our proposed method can quickly and accurately capture the latent relations between the interests of researchers and the topics of paper, and be able to acquire the researchers’ preferences effectively as well. The proposed method has tremendous implications in personalized academic paper recommendation, to propel technological progress.

In the task of Person re-identification (reID), the range of motion of pedestrians often spans multiple camera areas, and their motion direction and behavior cannot be constrained, and irrelevant people or objects in different scenes will also obtain target pedestrian information for us Cause interference. At the same time, the surveillance system also has many characteristics such as a fixed shooting angle of a single camera, different angles between different cameras, and low image resolution. These characteristics make the task of Person re-identification difficult. This paper proposes a Multi-level Feature Extraction Network (MFEN) based on SEResNet-50. Extracting richer and more diverse pedestrian features from poor-quality images will effectively improve the re-identification ability of the network, and MFEN can obtain Multistage key features in the image through the Feature Re-extraction Method (FRM) proposed in this paper. Experiments show that compared with AANet-50, MFEN has 3.85% /0.71% improvements of mAP/ Rank-1 on the Market1501 dataset, and 2.74% /1.28% improvements of mAP/ Rank-1 on the DukeMTMC-reID dataset.

This paper uses the coordinated energy management strategy for different sources and storages in the framework of flexible grid-connected energy hubs that participate in the day-ahead (DA) energy and reserve markets. In the base problem, this method maximizes the difference between the expected revenue of hubs gained by selling energy and reserve power in the proposed markets and the expected cost of lost flexibility (COLF). Also, it is subject to linearized optimal power flow (LOPF) equations in the electricity, gas and district heating systems, as well as hub constraints including different sources, storages and reserve models. This problem contains uncertainties of load, market price, reserve requirement, renewable power and hub mobile storages parameters. Therefore, the hybrid stochastic/robust optimization (HSRO) is suitable to model these uncertain parameters and obtain robust capability for the hub to improve the system flexibility. Accordingly, the bounded uncertainty-based robust optimization (BURO) is used in this paper to model the uncertainty of hub mobile storages to achieve the hub robust potential in improving the system flexibility, and other uncertain parameters are modeled according to scenario-based stochastic programming (SBSP). Finally, the proposed strategy is implemented on a standard test system. The obtained numerical results confirm the capability of the suggested scheme in improving the economic status of sources and storages using the coordinated energy management strategy in the form of an energy hub, as well as enhancing economic conditions, operation, and flexibility of energy networks thanks to hubs for having access to optimal scheduling.

The researcher proposed the concept of Top-K high-utility itemsets mining over data streams. Users directly specify the number K of high-utility itemsets they wish to obtain for mining with no need to set a minimum utility threshold. There exist some problems in current Top-K high-utility itemsets mining algorithms over data streams including the complex construction process of the storage structure, the inefficiency of threshold raising strategies and utility pruning strategies, and large scale of the search space, etc., which still can not meet the requirement of real-time processing over data streams with limited time and memory constraints. To solve this problem, this paper proposes an efficient algorithm based on dataset projection for mining Top-K high-utility itemsets from a data stream. A data structure CIUDataListSW is also proposed, which stores the position of the item in the transaction to effectively obtain the initial projected dataset of the item. In order to improve the projection efficiency, this paper innovates a new reorganization technology for projected transactions in common batches to maintain the sort order of transactions in the process of dataset projection. Dual pruning strategy and transaction merging mechanism are also used to further reduce search space and dataset scanning costs. In addition, based on the proposed CUDHSW structure, an efficient threshold raising strategy CUD is used, and a new threshold raising strategy CUDCB is designed to further shorten the mining time. Experimental results show that the algorithm has great advantages in running time and memory consumption, and it is especially suitable for the mining of high-utility itemsets of dense datasets.

This paper presents a new approach to the multi-modal medical image fusion based on Principal Component Analysis (PCA) and Singular value decomposition (SVD).The main objective of the proposed approach is to facilitate its implementation on a hardware unit, so it works effectively at run time. To evaluate the presented approach, it was tested in fusing four different cases of a registered CT and MRI images. Eleven quality metrics (including Mutual Information and Universal Image Quality Index) were used in evaluating the fused image obtained by the proposed approach, and compare it with the images obtained by the other fusion approaches. In experiments, the quality metrics shows that the fused image obtained by the presented approach has better quality result and it proved effective in medical image fusion especially in MRI and CT images. It also indicates that the paper approach had reduced the processing time and the memory required during the fusion process, and leads to very cheap and fast hardware implementation of the presented approach.

This paper mainly considers the finite-time synchronization problem of fuzzy inertial cellular neural networks (FICNNs) with time-varying delays. By constructing the suitable Lyapunov functional, and using integral inequality techniques, several sufficient criteria have been proposed to ensure the finite-time synchronization for the addressed (FICNNs). Without applying the known finite-time stability theorem, which is widely used to solve the finite-time synchronization problems for (FICNNs). In this paper, the proposed method is relatively convenient to solve finite-time synchronization problem of the addressed system, this paper extends the research works on the finite-time synchronization of (FICNNs). Finally, numerical simulations illustrated verify the effectiveness of the proposed results.

A cubic bipolar fuzzy set (CBFS) is a new approach in computational intelligence and decision-making under uncertainty. This model is the generalization of bipolar fuzzy sets to deal with two-sided contrasting features which can describe the information with a bipolar fuzzy number and an interval-valued bipolar fuzzy number simultaneously. In this paper, the Dombi’s operations are analyzed for information aggregation of cubic bipolar fuzzy numbers (CBFNs). The Dombi’s operations carry the advantage of more pliability and reliability due to the existence of their operational parameters. Owing to the pliable nature of Dombi’s operators, this research work introduces new aggregation operators named as cubic bipolar fuzzy Dombi weighted averaging (CBFDWA) operator and cubic bipolar fuzzy Dombi ordered weighted averaging (CBFDOWA) operator with ℙ -order and ℝ -order, respectively. Additionally, this paper presents some significant characteristics of suggested operators including, idempotency, boundedness and monotonicity. Moreover, a robust multi-criteria decision making (MCDM) technique is developed by using ℙ -CBFDWA and ℝ -CBFDWA operators. Based on the suggested operators a practical application is demonstrated towards MCDM under uncertainty. The comparison analysis of suggested Dombi’s operators with existing operators is also given to discuss the rationality, efficiency and applicability of these operators.

Due to the complexity and variety of textures on Strip steel, it is very difficult to detect defects on rigid surfaces. This paper proposes a metal surface defect classification method based on an improved bat algorithm to optimize BP neural network. First, this paper uses the Local Binary Pattern(LBP) algorithm to extract features from six types of defect images including inclusion, patches, crazing, pitted, rolled-in, and scratches, and build a feature sample library with the extracted feature values. Then, the WG-BA-BP network is used to classify the defect images with different characteristics. The weighted experience factor added by the network can control the flight speed of the bat according to the number of iterations and the change of the fitness function. And the gamma distribution is added in the process of calculating loudness, which enhances the local searchability. The BP network optimized by this method has higher accuracy. Finally, to verify the effectiveness of the method, this article introduces the five evaluation indicators of accuracy, precision, sensitivity, specificity, and F1 value under the multi-class model. To prove that this algorithm is more feasible and effective compared with other swarm intelligence algorithms. The best prediction performance of WG-BA-BP is 0.010905, and the accuracy rate can reach 0.9737.