Search

CUPID is a next-generation bolometric experiment aiming at searching for neutrinoless double-beta decay with ∼250 kg of isotopic mass of 100Mo. It will operate at ∼10 mK in a cryostat currently hosting a similar-scale bolometric array for the CUORE experiment at the Gran Sasso National Laboratory (Italy). CUPID will be based on large-volume scintillating bolometers consisting of 100Mo-enriched Li2MoO4 crystals, facing thin Ge-wafer-based bolometric light detectors. In the CUPID design, the detector structure is novel and needs to be validated. In particular, the CUORE cryostat presents a high level of mechanical vibrations due to the use of pulse tubes and the effect of vibrations on the detector performance must be investigated. In this paper we report the first test of the CUPID-design bolometric light detectors with NTD-Ge sensors in a dilution refrigerator equipped with a pulse tube in an above-ground lab. Light detectors are characterized in terms of sensitivity, energy resolution, pulse time constants, and noise power spectrum. Despite the challenging noisy environment due to pulse-tube-induced vibrations, we demonstrate that all the four tested light detectors comply with the CUPID goal in terms of intrinsic energy resolution of 100 eV RMS baseline noise. Indeed, we have measured 70-90 eV RMS for the four devices, which show an excellent reproducibility. We have also obtained high energy resolutions at the 356 keV line from a 133Ba source, as good as Ge semiconductor γ detectors in this energy range.

An array of twelve 0.28 kg lithium molybdate (LMO) low-temperature bolometers equipped with 16 bolometric Ge light detectors, aiming at optimization of detector structure for CROSS and CUPID double-beta decay experiments, was constructed and tested in a low-background pulse-tube-based cryostat at the Canfranc underground laboratory in Spain. Performance of the scintillating bolometers was studied depending on the size of phonon NTD-Ge sensors glued to both LMO and Ge absorbers, shape of the Ge light detectors (circular vs. square, from two suppliers), in different light collection conditions (with and without reflector, with aluminum coated LMO crystal surface). The scintillating bolometer array was operated over 8 months in the low-background conditions that allowed to probe a very low, μBq/kg, level of the LMO crystals radioactive contamination by 228Th and 226Ra.

The Cryogenic Underground Observatory for Rare Events (CUORE) is the most sensitive experiment searching for neutrinoless double-beta decay (0νββ) in 130Te. CUORE uses a cryogenic array of 988 TeO2 calorimeters operated at ∼10 mK with a total mass of 741 kg. To further increase the sensitivity, the detector response must be well understood. Here, we present a non-linear thermal model for the CUORE experiment on a detector-by-detector basis. We have examined both equilibrium and dynamic electro-thermal models of detectors by numerically fitting non-linear differential equations to the detector data of a subset of CUORE channels which are well characterized and representative of all channels. We demonstrate that the hot-electron effect and electric-field dependence of resistance in NTD-Ge thermistors alone are inadequate to describe our detectors' energy-dependent pulse shapes. We introduce an empirical second-order correction factor in the exponential temperature dependence of the thermistor, which produces excellent agreement with energy-dependent pulse shape data up to 6 MeV. We also present a noise analysis using the fitted thermal parameters and show that the intrinsic thermal noise is negligible compared to the observed noise for our detectors.

A scintillating bolometer based on a large cubic Li$_{2}$$^{100}$MoO$_4$crystal (45 mm side) and a Ge wafer (scintillation detector) has been operatedin the CROSS cryogenic facility at the Canfranc underground laboratory inSpain. The dual-readout detector is a prototype of the technology that will beused in the next-generation $0\nu2\beta$ experiment CUPID. The measurementswere performed at 18 and 12 mK temperature in a pulse tube dilutionrefrigerator. This setup utilizes the same technology as the CUORE cryostatthat will host CUPID and so represents an accurate estimation of the expectedperformance. The Li$_{2}$$^{100}$MoO$_4$ bolometer shows a high energyresolution of 6 keV FWHM at the 2615 keV $\gamma$ line. The detection ofscintillation light for each event triggered by the Li$_{2}$$^{100}$MoO$_4$bolometer allowed for a full separation ($\sim$8$\sigma$) between$\gamma$($\beta$) and $\alpha$ events above 2 MeV. The Li$_{2}$$^{100}$MoO$_4$crystal also shows a high internal radiopurity with $^{228}$Th and $^{226}$Raactivities of less than 3 and 8 $\mu$Bq/kg, respectively. Taking also intoaccount the advantage of a more compact and massive detector array, which canbe made of cubic-shaped crystals (compared to the cylindrical ones), this testdemonstrates the great potential of cubic Li$_{2}$$^{100}$MoO$_4$ scintillatingbolometers for high-sensitivity searches for the $^{100}$Mo $0\nu2\beta$ decayin CROSS and CUPID projects.

A scintillating bolometer based on a large cubic Li$_{2}$$^{100}$MoO$_4$crystal (45 mm side) and a Ge wafer (scintillation detector) has been operatedin the CROSS cryogenic facility at the Canfranc underground laboratory inSpain. The dual-readout detector is a prototype of the technology that will beused in the next-generation $0u2\beta$ experiment CUPID. The measurementswere performed at 18 and 12 mK temperature in a pulse tube dilutionrefrigerator. This setup utilizes the same technology as the CUORE cryostatthat will host CUPID and so represents an accurate estimation of the expectedperformance. The Li$_{2}$$^{100}$MoO$_4$ bolometer shows a high energyresolution of 6 keV FWHM at the 2615 keV $\gamma$ line. The detection ofscintillation light for each event triggered by the Li$_{2}$$^{100}$MoO$_4$bolometer allowed for a full separation ($\sim$8$\sigma$) between$\gamma$($\beta$) and $\alpha$ events above 2 MeV. The Li$_{2}$$^{100}$MoO$_4$crystal also shows a high internal radiopurity with $^{228}$Th and $^{226}$Raactivities of less than 3 and 8 $\mu$Bq/kg, respectively. Taking also intoaccount the advantage of a more compact and massive detector array, which canbe made of cubic-shaped crystals (compared to the cylindrical ones), this testdemonstrates the great potential of cubic Li$_{2}$$^{100}$MoO$_4$ scintillatingbolometers for high-sensitivity searches for the $^{100}$Mo $0u2\beta$ decayin CROSS and CUPID projects.

As noble liquid time projection chambers grow in size their high voltage requirements increase, and detailed, reproducible studies of dielectric breakdown and the onset of electroluminescence are needed to inform their design. The Xenon Breakdown Apparatus (XeBrA) is a 5-liter cryogenic chamber built to characterize the DC high voltage breakdown behavior of liquid xenon and liquid argon. Electrodes with areas up to 33 cm2 were tested while varying the cathode-anode separation from 1 to 6 mm with a voltage difference up to 75 kV. A power-law relationship between breakdown field and electrode area was observed. The breakdown behavior of liquid argon and liquid xenon within the same experimental apparatus was comparable.

We report the demonstration of a low-power pixelated readout system designed for three-dimensional ionization charge detection and digital readout of liquid argon time projection chambers (LArTPCs) . Unambiguous 3D charge readout was achieved using a custom-designed system-on-a-chip ASIC (LArPix) to uniquely instrument each pad in a pixelated array of charge-collection pads. The LArPix ASIC, manufactured in 180 nm bulk CMOS, provides 32 channels of charge-sensitive amplification with self-triggered digitization and multiplexed readout at temperatures from 80 K to 300 K . Using an 832-channel LArPix-based readout system with 3 mm spacing between pads, we demonstrated low-noise (0

We present a measurement of the extraction efficiency of quasi-free electrons from the liquid into the gas phase in a two-phase xenon time-projection chamber. The measurements span a range of electric fields from 2.4 to 7.1 kV/cm in the liquid xenon, corresponding to 4.5 to 13.1 kV/cm in the gaseous xenon. Extraction efficiency continues to increase at the highest extraction fields, implying that additional charge signal may be attained in two-phase xenon detectors through careful high-voltage engineering of the gate-anode region.

We calibrate a two-phase xenon detector at 0.27 keV in the charge channel and at 2.8 keV in both the light and charge channels using a 37Ar source that is directly released into the detector. We map the light and charge yields as a function of electric drift field. For the 2.8 keV peak, we calculate the Thomas-Imel box parameter for recombination and determine its dependence on drift field. For the same peak, we achieve an energy resolution, Eσ/Emean, between 9.8% and 10.8% for 0.1 kV/cm to 2 kV/cm electric drift fields.

CUORE is a cryogenic detector that will be operated at LNGS to search for neutrinoless double beta decay (0ββ) of 130Te. The detector installation was completed in summer 2016. Before the installation, several cold runs were done to test the cryogenic system performance. In the last cold run the base temperature of 6.3mK was reached in stable condition. CUORE-0, a CUORE prototype, has proven the feasibility of CUORE, demonstrating that the target background of 0.01 counts/keV/kg/y and the energy resolution of 5 keV are within reach.

Temperature sensors fabricated from ultra-low radioactivity materials have been developed for low-background experiments searching for neutrinoless double-beta decay and the interactions of WIMP dark matter. The sensors consist of electrical traces photolithographically-patterned onto substrates of vapor-deposited parylene. They are demonstrated to function as expected, to do so reliably and robustly, and to be highly radio-pure. This work is a proof-of-concept study of a technology that can be applied to broad class of electronic circuits used in low-background experiments.