Search

Terahertz (THz) backward wave oscillators (BWOs) hold immense potential for a broad range of industrial and military applications. This study presents a comparative analysis of 0.34 THz sheet beam (SB) and circular beam (CB) folded waveguide (FWG) BWOs. We examined the design, simulation (CST MWS and PS, HFSS), and performance, revealing that sheet beam BWO outperforms circular beam BWO in terms of interaction impedance, power, efficiency, and bandwidth. Under 20 kV beam voltage and 10 mA beam current conditions, sheet beam BWO achieves 0.47 Ω (0.34 THz) interaction impedance, 0.65 W output power, and a bandwidth of approximately 12 GHz, surpassing the 0.18 Ω , 0.23 W, and 8.5 GHz values of circular beam BWO, respectively. Furthermore, this study encompasses the fabrication and thorough characterization of the sheet beam BWO's slow-wave structure. Experimental validation confirms its effectiveness, with measured S 11 demonstrating reflection below - 10 dB and S 21 exhibiting transmission above - 2 dB. [ABSTRACT FROM AUTHOR]

Terahertz backward wave oscillators based on double corrugated waveguides are enabling devices for modern satellite communication systems. This research focuses on the design of a 0.34 THz double corrugated waveguide-based interaction structure using a sheet beam. This choice allows the use of shorter pillars along with a narrow gap between pillar rows. Shorter pillars are easier to manufacture and a narrow gap is required for better interaction impedance. Circular beams restrict the use of larger pillars and narrow gap between pillars. The performance of this interaction structure is compared with a folded waveguide. Under the same operating conditions involving a 20 kV beam voltage and a 30 mA beam current, the double corrugated waveguide interaction structure exhibits impressive performance in simulations, featuring an interaction impedance of 0.52 Ω at 0.34 THz, an output power of 3.2 W, and a bandwidth extending to approximately 20 GHz. In contrast, the folded waveguide, as per simulation results, registers values of 0.43 Ω , 2.6 W, and a 12 GHz bandwidth, respectively. The proposed double corrugated waveguide-based interaction structure is fabricated using modern CNC machining. Experimental validation reinforces the effectiveness of this design, with measurements indicating reflection below −20 dB and transmission exceeding −2 dB. [ABSTRACT FROM AUTHOR]

The microstrip meander-line traveling wave tube (TWT) is a kind of small sized, low voltage, low cost, and easy to fabricate TWT. It is an attractive choice for many applications, such as communication systems, phased array radars, security detectors, and electronic counter measure (ECM) instruments. In this paper, a Ka band U-shape meander-line slow wave structure (SWS) supported by a diamond rod is presented. The dispersion characteristics of this meander-line SWS are analyzed using CST MW Studio. The S-parameter simulation results show that the reflection is below − 15 dB between 32 and 38 GHz, and the particle-in-cell (PIC) simulation reveals that this meander-line TWT can produce 57 W output power at 36 GHz, when it is driven by a 8.1 kV, 0.04 A sheet beam with rectangular cross-sectional area of 1.0 mm × 0.12 mm. This meander-line SWS is manufactured, assembled, and tested. The good agreement between the simulated and measured S11 has been achieved and the mismatch between the simulated and measured S21 has been discussed at the end. [ABSTRACT FROM AUTHOR]

A novel Ka-band azimuthal supported angular log-periodic strip-line (ASALS) slow wave structure (SWS) is proposed for a miniature radial sheet beam traveling wave tube (TWT). In the proposed SWS, two dielectric rods are employed to support the ASALS at both azimuthal sides. The strip-line is made of high-melting metal; thus, the ASALS SWS has a higher power capacity than microstrip SWSs. The high-frequency characteristics of that proposed SWS are investigated by using simulation software. The ASALS SWS is then fabricated and assembled for cold test. The measured transmission loss and reflection loss are better than − 2.5 dB and − 10 dB, respectively. The hot performance of the proposed is studied based on particle-in-cell (PIC) simulation. It is shown that when the operating voltage is 5700 V, the ASALS TWT can give a maximum output power of 320 W at the frequency of 39 GHz, corresponding to a gain of 14.9 dB and electron efficiency of 9.12%. [ABSTRACT FROM AUTHOR]

High-power vacuum electron devices (VEDs) are attractive, because of their broad applications, such as advance radars, electromagnetic warfare, and plasma reactors. In this paper, a Ka band mega-watt sheet electron beam traveling wave tube (TWT) is reported. A two-staged rectangular waveguide grating slow wave structure (SWS) driven by a sheet electron beam (20 mm × 1 mm, 164.8 kV, 850 A, 20 ns) is used in this TWT. In order to suppress the self-excited oscillation, a rectangular BeO attenuator is inserted between the two-staged SWSs. The experimental results show that the TWT can produce more than 2 MW output power from 34.2 to 35.5 GHz. And the maximum output power is 4.24 MW at 35 GHz, corresponding to the gain of 25.9 dB. In the future, the TWT will be used to perform research on biomedical effects and imaging. [ABSTRACT FROM AUTHOR]