Search

Breast cancer is the most commonly diagnosed cancer worldwide. The therapy used and its success depend highly on the histology of the tumor. This study aimed to explore the potential of predicting the molecular subtype of breast cancer using radiomic features extracted from screening digital mammography (DM) images. A retrospective study was performed using the OPTIMAM Mammography Image Database (OMI-DB). Four binary classification tasks were performed: luminal A vs. non-luminal A, luminal B vs. non-luminal B, TNBC vs. non-TNBC, and HER2 vs. non-HER2. Feature selection was carried out by Pearson correlation and LASSO. The support vector machine (SVM) and naive Bayes (NB) ML classifiers were used, and their performance was evaluated with the accuracy and the area under the receiver operating characteristic curve (AUC). A total of 186 patients were included in the study: 58 luminal A, 35 luminal B, 52 TNBC, and 41 HER2. The SVM classifier resulted in AUCs during testing of 0.855 for luminal A, 0.812 for luminal B, 0.789 for TNBC, and 0.755 for HER2, respectively. The NB classifier showed AUCs during testing of 0.714 for luminal A, 0.746 for luminal B, 0.593 for TNBC, and 0.714 for HER2. The SVM classifier outperformed NB with statistical significance for luminal A (p = 0.0268) and TNBC (p = 0.0073). Our study showed the potential of radiomics for non-invasive breast cancer subtype classification.

Ultrasound (US) imaging is used in the diagnosis and monitoring of COVID-19 and breast cancer. The presence of Speckle Noise (SN) is a downside to its usage since it decreases lesion conspicuity. Filters can be used to remove SN, but they involve time-consuming computation and parameter tuning. Several researchers have been developing complex Deep Learning (DL) models (150,000–500,000 parameters) for the removal of simulated added SN, without focusing on the real-world application of removing naturally occurring SN from original US images. Here, a simpler (σ = 0.05, 0.1, 0.2, 0.5). The original US images (N = 1227, breast + lung) were given as targets, while the noised US images served as the input. The Structural Similarity Index Measure (SSIM) and Peak Signal-to-Noise Ratio (PSNR) were used to compare the output of the CNN-AE and of the Median and Lee filters with the original US images. The CNN-AE outperformed the use of these classic filters for every noise level. To see how well the model removed naturally occurring SN from the original US images and to test its real-world applicability, a CNN model that differentiates malignant from benign breast lesions was developed. Several inputs were used to train the model (original, CNN-AE denoised, filter denoised, and noised US images). The use of the original US images resulted in the highest Matthews Correlation Coefficient (MCC) and accuracy values, while for sensitivity and negative predicted values, the CNN-AE-denoised US images (for higher σ values) achieved the best results. Our results demonstrate that the application of a simpler DL model for SN removal results in fewer misclassifications of malignant breast lesions in comparison to the use of original US images and the application of the Median filter. This shows that the use of a less-complex model and the focus on clinical practice applicability are relevant and should be considered in future studies.

Currently, breast cancer is the most commonly diagnosed type of cancer worldwide. Digital Breast Tomosynthesis (DBT) has been widely accepted as a stand-alone modality to replace Digital Mammography, particularly in denser breasts. However, the image quality improvement provided by DBT is accompanied by an increase in the radiation dose for the patient. Here, a method based on 2D Total Variation (2D TV) minimization to improve image quality without the need to increase the dose was proposed. Two phantoms were used to acquire data at different dose ranges (0.88–2.19 mGy for Gammex 156 and 0.65–1.71 mGy for our phantom). A 2D TV minimization filter was applied to the data, and the image quality was assessed through contrast-to-noise ratio (CNR) and the detectability index of lesions before and after filtering. The results showed a decrease in 2D TV values after filtering, with variations of up to 31%, increasing image quality. The increase in CNR values after filtering showed that it is possible to use lower doses (−26%, on average) without compromising on image quality. The detectability index had substantial increases (up to 14%), especially in smaller lesions. So, not only did the proposed approach allow for the enhancement of image quality without increasing the dose, but it also improved the chances of detecting small lesions that could be overlooked.

Breast cancer is the most commonly diagnosed cancer worldwide. The therapy used and its success depend highly on the histology of the tumor. This study aimed to explore the potential of predicting the molecular subtype of breast cancer using radiomic features extracted from screening digital mammography (DM) images. A retrospective study was performed using the OPTIMAM Mammography Image Database (OMI-DB). Four binary classification tasks were performed: luminal A vs. non-luminal A, luminal B vs. non-luminal B, TNBC vs. non-TNBC, and HER2 vs. non-HER2. Feature selection was carried out by Pearson correlation and LASSO. The support vector machine (SVM) and naive Bayes (NB) ML classifiers were used, and their performance was evaluated with the accuracy and the area under the receiver operating characteristic curve (AUC). A total of 186 patients were included in the study: 58 luminal A, 35 luminal B, 52 TNBC, and 41 HER2. The SVM classifier resulted in AUCs during testing of 0.855 for luminal A, 0.812 for luminal B, 0.789 for TNBC, and 0.755 for HER2, respectively. The NB classifier showed AUCs during testing of 0.714 for luminal A, 0.746 for luminal B, 0.593 for TNBC, and 0.714 for HER2. The SVM classifier outperformed NB with statistical significance for luminal A (p = 0.0268) and TNBC (p = 0.0073). Our study showed the potential of radiomics for non-invasive breast cancer subtype classification. [ABSTRACT FROM AUTHOR]

Breast cancer was the most diagnosed cancer in 2020. Several thousand women continue to die from this disease. A better and earlier diagnosis may be of great importance to improving prognosis, and that is where Artificial Intelligence (AI) could play a major role. This paper surveys different applications of AI in Breast Imaging. First, traditional Machine Learning and Deep Learning methods that can detect the presence of a lesion and classify it into benign/malignant—which could be important to diminish reading time and improve accuracy—are analyzed. Following that, researches in the field of breast cancer risk prediction using mammograms—which may be able to allow screening programs customization both on periodicity and modality—are reviewed. The subsequent section analyzes different applications of augmentation techniques that allow to surpass the lack of labeled data. Finally, still concerning the absence of big datasets with labeled data, the last section studies Self-Supervised learning, where AI models are able to learn a representation of the input by themselves. This review gives a general view of what AI can give in the field of Breast Imaging, discussing not only its potential but also the challenges that still have to be overcome.

Microcalcification clusters (MCs) are among the most important biomarkers for breast cancer, especially in cases of nonpalpable lesions. The vast majority of deep learning studies on digital breast tomosynthesis (DBT) are focused on detecting and classifying lesions, especially soft-tissue lesions, in small regions of interest previously selected. Only about 25% of the studies are specific to MCs, and all of them are based on the classification of small preselected regions. Classifying the whole image according to the presence or absence of MCs is a difficult task due to the size of MCs and all the information present in an entire image. A completely automatic and direct classification, which receives the entire image, without prior identification of any regions, is crucial for the usefulness of these techniques in a real clinical and screening environment. The main purpose of this work is to implement and evaluate the performance of convolutional neural networks (CNNs) regarding an automatic classification of a complete DBT image for the presence or absence of MCs (without any prior identification of regions). In this work, four popular deep CNNs are trained and compared with a new architecture proposed by us. The main task of these trainings was the classification of DBT cases by absence or presence of MCs. A public database of realistic simulated data was used, and the whole DBT image was taken into account as input. DBT data were considered without and with preprocessing (to study the impact of noise reduction and contrast enhancement methods on the evaluation of MCs with CNNs). The area under the receiver operating characteristic curve (AUC) was used to evaluate the performance. Very promising results were achieved with a maximum AUC of 94.19% for the GoogLeNet. The second-best AUC value was obtained with a new implemented network, CNN-a, with 91.17%. This CNN had the particularity of also being the fastest, thus becoming a very interesting model to be considered in other studies. With this work, encouraging outcomes were achieved in this regard, obtaining similar results to other studies for the detection of larger lesions such as masses. Moreover, given the difficulty of visualizing the MCs, which are often spread over several slices, this work may have an important impact on the clinical analysis of DBT images.

Breast cancer affects thousands of women across the world, every year. Methods to predict risk of breast cancer, or to stratify women in different risk levels, could help to achieve an early diagnosis, and consequently a reduction of mortality. This paper aims to review articles that extracted texture features from mammograms and used those features along with machine learning algorithms to assess breast cancer risk. Besides that, deep learning methodologies that aimed for the same goal were also reviewed. In this work, first, a brief introduction to breast cancer statistics and screening programs is presented; after that, research done in the field of breast cancer risk assessment are analyzed, in terms of both methodologies used and results obtained. Finally, considerations about the analyzed papers are conducted. The results of this review allow to conclude that both machine and deep learning methodologies provide promising results in the field of risk analysis, either in a stratification in risk groups, or in a prediction of a risk score. Although promising, future endeavors in this field should consider the possibility of the implementation of the methodology in clinical practice.

3D volume rendering may represent a complementary option in the visualization of Digital Breast Tomosynthesis (DBT) examinations by providing an understanding of the underlying data at once. Rendering parameters directly influence the quality of rendered images. The purpose of this work is to study the influence of two of these parameters (voxel dimension in z direction and sampling distance) on DBT rendered data. Both parameters were studied with a real phantom and one clinical DBT data set. The voxel size was changed from 0.085 × 0.085 × 1.0 mm3 to 0.085 × 0.085 × 0.085 mm3 using ten interpolation functions available in the Visualization Toolkit library (VTK) and several sampling distance values were evaluated. The results were investigated at 90º using volume rendering visualization with composite technique. For phantom quantitative analysis, degree of smoothness, contrast-to-noise ratio, and full width at half maximum of a Gaussian curve fitted to the profile of one disk were used. Additionally, the time required for each visualization was also recorded. Hamming interpolation function presented the best compromise in image quality. The sampling distance values that showed a better balance between time and image quality were 0.025 mm and 0.05 mm. With the appropriate rendering parameters, a significant improvement in rendered images was achieved.

Currently, breast cancer is the most commonly diagnosed type of cancer worldwide. Digital Breast Tomosynthesis (DBT) has been widely accepted as a stand-alone modality to replace Digital Mammography, particularly in denser breasts. However, the image quality improvement provided by DBT is accompanied by an increase in the radiation dose for the patient. Here, a method based on 2D Total Variation (2D TV) minimization to improve image quality without the need to increase the dose was proposed. Two phantoms were used to acquire data at different dose ranges (0.88–2.19 mGy for Gammex 156 and 0.65–1.71 mGy for our phantom). A 2D TV minimization filter was applied to the data, and the image quality was assessed through contrast-to-noise ratio (CNR) and the detectability index of lesions before and after filtering. The results showed a decrease in 2D TV values after filtering, with variations of up to 31%, increasing image quality. The increase in CNR values after filtering showed that it is possible to use lower doses (−26%, on average) without compromising on image quality. The detectability index had substantial increases (up to 14%), especially in smaller lesions. So, not only did the proposed approach allow for the enhancement of image quality without increasing the dose, but it also improved the chances of detecting small lesions that could be overlooked. [ABSTRACT FROM AUTHOR]