Search

The aim of the present study was to investigate relationships between a performance index derived from the Yo-Yo Intermittent Recovery Test level 1 (Yo-Yo IR1) and other measures of physical performance and skill in handball players. The other measures considered included peak muscular power of the lower limbs (Wpeak), jumping ability (squat and counter-movement jumps (SJ, CMJ), a handball skill test and the average sprinting velocities over the first step (VS) and the first 5 m (V5m). Test scores for 25 male national-level adolescent players (age: 17.2 ± 0.7 years) averaged 4.83 ± 0.34 m·s-1 (maximal velocity reached at the Yo-Yo IR1); 917 ± 105 Watt, 12.7 ± 3 W·kg-1 (Wpeak); 3.41 ± 0.5 m·s-1 and 6.03 ± 0.6 m·s-1 (sprint velocities for Vs and V5m respectively) and 10.3 ± 1 s (handball skill test). Yo-Yo IR1 test scores showed statistically significant correlations with all of the variables examined: Wpeak (W and W·kg-1) r = 0.80 and 0.65, respectively, p≤0.001); sprinting velocities (r = 0.73 and 0.71 for VS and V5m respectively; p≤0.001); jumping performance (SJ: r = 0.60, p≤0.001; CMJ: r= 0.66, p≤0.001) and the handball skill test (r = 0.71; p≤0.001). We concluded that the Yo-Yo test score showed a sufficient correlation with other potential means of assessing handball players, and that intra-individual changes of Yo-Yo IR1 score could provide a useful composite index of the response to training or rehabilitation, although correlations lack sufficient precision to help in players' selection. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the existence of the sticking region in two legged free weight squats. Fifteen resistance-training males (age 24 ± 4 years, body mass 82 ± 11 kg, body height 179 ± 6 cm) with 6 ± 3 years of resistance-training experience performed 6-RM in free weight squats. The last repetition was analyzed for the existence of a sticking region. Only in 10 out of 15 participants a sticking region was observed. The observed sticking region was much shorter than in the bench press. Furthermore, rectus femoris decreased the EMG activity in contrast to increased EMG activity in biceps femoris around the sticking and surrounding region. No significant change in EMG activity was found for the lateral and medial vastus muscles. It is suggested that a combination of these muscle activity changes could be one of the causes of the existence of the sticking region in free weight squats. [ABSTRACT FROM AUTHOR]

The aim of this study was to examine the effect of a six-week combined jump and sprint training program on strength-speed abilities in a large sample of youth competitive soccer players. It was hypothesized that the experimental training group would enhance their jumping and sprinting abilities. Enhancement of kicking performance was also hypothesized due to an expected increase in explosive strength established by a plyometric and sprinting regimen. Fifty- two young male soccer players playing at the national level (aged 13.4 ± 1.4 years, body mass 53.4 ± 11.7 kg, body height 1.66 ± 0.11 m) took part in the study. Half of the group underwent the plyometric and sprint training program in addition to their normal soccer training, while the other half was involved in soccer training only. The plyometric training group enhanced their running (+1.7 and +3.2%) and jumping performance (+7.7%) significantly over the short period of time, while the control group did not. Furthermore, both groups increased their kicking velocity after just six weeks of training (+3.3 vs. 6.6%). The findings suggest that a short in-season 6-week sprint and jump training regimen can significantly improve explosive strength in soccer-specific skills and that these improvements can be transferred to soccer kicking performance in terms of ball speed. [ABSTRACT FROM AUTHOR]

The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 - 1.7 yrs, body mass 80.7 - 10.9 kg, body height 1.79 - 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position. [ABSTRACT FROM AUTHOR]

The aims of this study were to compare performance with physiological and perceptual responses on steep uphill inclines between double poling and diagonal stride and to investigate the effects of pole length when double poling. Eight male, competitive cross-country skiers (22 ± 1.1 yrs, peak oxygen uptake (VO 2peak ) in the diagonal stride: 69.4 ± 5.5 ml·kg -1 ·min -1 ) performed four identical tests, one in the diagonal stride, and three in double poling with different pole lengths (self-selected, self-selected -5 cm and self-selected +10 cm). Each test was conducted at a fixed speed (10 km/h), with inclination rising by 1%, starting with 7%, each until voluntary exhaustion. VO 2peak , the heart rate, blood lactate concentration, and the rating of perceived exertion were determined for each pole length in each test. The peak heart rate (p < 0.001) and VO 2peak (p = 0.004) were significantly higher in the diagonal stride test compared with double poling with all pole lengths. Time to exhaustion (TTE) differed significantly between all four conditions (all p < 0.001), with the following order from the shortest to the longest TTE: short poles, normal poles and long poles in double poling, and the diagonal stride. Consequently, a significantly higher slope inclination was reached (p < 0.001) using the diagonal stride (17%) than for double poling with long poles (14%), normal (13%) and short (13%) poles. The current study showed better performance and higher VO 2peak in the diagonal stride compared to double poling in steep uphill terrain, demonstrating the superiority of the diagonal stride for uphill skiing. However, in double poling, skiers achieved improved performance due to greater skiing efficiency when using long poles, compared to normal and short poles., (© 2021 Per-Øyvind Torvik, Johan Persson, Roland van den Tillaar, published by Sciendo.)

The purpose of this study was to investigate whether sling-based training focused on rotational exercises would improve shooting performance in outfield handball players during the competitive season, and whether changes in performance were related to altered levels of core strength and rotational velocity. Twenty-five female outfield handball players (mean age 19.5 ± 2.0 years, height 1.72 ± 0.06 m, body mass 71.5 ± 8.6 kg, training experience 10.3 ± 2.4 years), performed 7 m shots, with and without a run-up, and jump shots. Maximal ball velocity, peak rotational velocity of the trunk with different loads and 1RM in a core strength test were measured before and after an 8-week training intervention. Players were divided into a sling-based and a plyometric/sprint training (control) group that trained three times per week for 8 weeks. The main findings were that sling-based training increased ball velocity by on average 3.2% across three techniques tested, while shooting performance decreased by 3% in the control group. However, both training groups demonstrated increased peak rotational velocity with different loads, but not the calculated 1RM core strength after the training period. It was concluded that sling-based training with rotational core exercises could improve maximal ball velocity in female handball players during a competitive season by around 3%. However, this increased ball velocity may have been caused by increased angular velocity in the core, rather than absolute maximal core strength. It is suggested that sling-based training has impacted timing variables of the different involved segments, or possibly power transfer between segments, which may explain the enhancement in ball velocity., (© 2021 Kenneth Stakset Dahl, Roland van den Tillaar, published by Sciendo.)

The aim of this study was to compare 6-RM muscle activation and kinematics in back squats with low and high barbell placements. Twelve resistance-trained males (23.5 ± 2.6 years, 86.8 ± 21.3 kg, 1.81 ± 0.08 m) with a minimum of 2 years of squatting experience performed a 6-RM using high and low barbell placements while muscle activation of eight muscles and joint kinematics were measured. During high barbell placement squats, lifting time was longer, with lower average velocity than low barbell placement. This was accompanied by a lesser knee flexion angle at the lowest point of the squat, and larger hip flexion angles during high, compared to low barbell squats. Furthermore, peak angular ankle, knee and hip velocities in the descending phase developed differently between conditions. No significant differences in muscle activation were found between conditions. Thus, our data suggests gross muscular adaptations between barbell placements may be similar over time, and therefore, from a muscular development standpoint, both squat styles are valid. Furthermore, unlike the low barbell placement, fatigue may manifest earlier itself in the high barbell squats during 6-RMs as sets progress toward a lifter's maximal capacity, altering kinematics, especially in the last repetition., (© 2020 Roland van den Tillaar, Eric Helms, published by Sciendo.)

The aims of this study were firstly to compare the similarity in upper-body muscle activation between the bench press and push-up at similar loads, and secondly to establish a 1-RM prediction equation between the two exercises based upon the load-velocity relationship. Twenty resistance-trained male athletes (age 22.5 ± 5.24 years, body mass 83.7 ± 10.7 kg, body height 1.80 ± 0.06 m) performed push-ups and bench presses with four different loads. Push-ups were performed without a weight vest and with a 10-20-30 kg weight vest. Bench presses were performed at 50-80% of athletes' assumed 1 repetition max (1-RM) in 10 kg steps, while a linear encoder measured performance during the exercises. A load-velocity relationship was established as a product of the load and velocity for the push-up and bench press per participant and the equation was used to establish a predicted 1-RM. Mean muscle activation of eight upper body muscles was recorded for each exercise and each load. The main findings of this study demonstrate an extremely large association between the predicted 1-RM loads performed with the push-up and bench press (r = 0.93) in experienced resistance trained men. Furthermore, most muscles showed similar activations between the two exercises with the different loads except the deltoid and biceps brachii muscles. It may be concluded that it is possible to predict a cross-over 1-RM between the two exercises based upon the load-velocity relationship in each exercise, and that training push-ups largely targets the same muscles as the bench press except the deltoid and biceps muscles. For coaches and athletes, the use of this method is a low cost and time-effective alternative for standard 1-RM bench press testing to predict maximal upper body strength., (© 2020 Roland van den Tillaar, Nick Ball, published by Sciendo.)

The objective of this study was to carry out a detailed quantitative analysis of the very high intensity runs during actual play in the 2013-2014 Spanish First Division, at a general level and according to the specific playing position and half. 380 matches of the Spanish First Division in the 2013 - 2014 season were monitored using the Mediacoach video motion analysis tool. Total distance, very high intensity (above 21 km/h) running distance and the number of runs at very high intensity of 230 players from 20 teams in the Spanish First Division were analysed. The main findings of the study were that the performance indicators at very high intensities decreased from the first half to the second half for all outfield players (covered distance: 4694 ± 538 m vs 4485 ± 437 m, sprint distance: 256 ± 72 m vs 239 ± 67 m, number of sprints: 14.3 ± 3.5 vs 13.2 ± 3.1), except the central defenders (sprint distance: 166 ± 37 vs 166 ± 40 m, number of sprints: 10.0 ± 2.1 vs 9.8 ± 3.8). Secondly, although wide defenders (9759 ± 665 m) and central midfielders (9776 ± 942 m) covered the most distance during matches, it were the wide defenders (30 ± 5), centre-forwards (28 ± 7) and wide midfielders (31 ± 8) who performed the most runs at very high intensity. Consequently, the distance they ran at these very high intensity runs followed the same pattern. Such results enable general and specific profiles by demarcation to be established based on the demands of the game at high-level competitive play.

The aim of this study was to examine the effect of fatigue during one set of 6-RM bench pressing upon the muscle patterning and performance. Fourteen resistance-trained males (age 22.5±2.0 years, stature 1.82±0.07 m, body mass 82.0±7.8 kg) conducted a 6-RM bench press protocol. Barbell kinematics and EMG activity of pectoralis major, deltoid anterior, biceps brachii, triceps brachii, rectus abdominis, oblique external and erector spinae were measured in each repetition during the 6-RM bench press. Total lifting time increased and the velocity in the ascending movement decreased (p≤0.001). However, the kinematics in the descending phase deferred: the time decreased and velocity increased during the 6-RM (p≤0.001). Generally, muscles increased their EMG amplitude during the six repetitions in the ascending movement, while only three of the seven measured muscles showed an increase over the six repetitions in the descending part in 6-RM bench pressing. It was concluded that the bench pressing performance decreased (lower barbell velocities and longer lifting times) with increasing fatigue in the 6-RM execution. Furthermore EMG increased in the prime movers and the trunk stabilizers (abdominal and spine), while the antagonist muscle (biceps) activity was not affected by fatigue during the lifting phase in a single set of 6-RM bench pressing.