Search

The treatment of spent cemented carbides using the conventional alkali-acid leaching process results in the generation of hazardous solid waste tungsten leaching residue. This study proposed an alternative process using the alkali-treated tungsten leaching residue (AW-residue) without the acid leaching step, preserving Co in the residue. By using photovoltaic silicon kerf waste (SKW) as a reducing agent, heavy metals (Co, Ni, W, Nb, and Ta) were efficiently extracted from AW-residue and a Co-rich alloy was obtained. The silicothermic reduction process facilitated the recovery of iron group metals (Co, Ni, and Fe) and effectively captured trace refractory metals (W, Ta, and Nb). Phase separation occurred through reduction reaction and viscosity-driven processes between the Co-rich alloy and the slag. Optimal conditions were identified as 20% SKW addition, MgO crucible, and a holding time of 120 min, achieving a total recovery yield of 95.5%, with specific yields for Co (97.7%), Ni (97.0%), W (82.5%), Nb (76.3%), and Ta (70.5%). A 20 kg pilot-scale experiment confirmed the feasibility of the process, yielding 47.0% Co-rich alloy from AW-residue compared to 48.3% in lab-scale experiment, and producing a harmless slag phase. This environmentally friendly approach promotes sustainable recycling of valuable metals in the tungsten industry. [Display omitted] • A silicothermic reduction was applied to extract heavy metals from AW-residue. • Photovoltaic silicon kerf waste was used as a low-cost and high-efficient reductant. • The AW-residue was converted to a Co-rich alloy and a harmless slag phase. • The total recovery yield of valuable metals (Co, Ni, W, Nb and Ta) was up to 95.5%. • The Co-rich alloy yield reached 47.0% in a 20 kg pilot-scale experiment. [ABSTRACT FROM AUTHOR]

This study employed spectroscopy, metagenomics, and molecular simulation to investigate the inhibitory effects of Cd(II) and Cu(II) on the anammox system, examining both intracellular and extracellular effects. At concentrations of 5 mg/L, Cd(II) and Cu(II) significantly reduced nitrogen removal efficiency by 41.46 % and 62.03 %, respectively. Additionally, elevated metal concentrations were correlated with decreased extracellular polymeric substances (EPS), thereby reducing their capacity to absorb heavy metals, particularly Cu(II), which decreased from 76.47 % to 14.67 %. Spectral analysis revealed alterations in the secondary structures of EPS induced by Cd(II) and Cu(II), decreasing the ratio of extracellular protein α-helix to (β-sheet + random coil), which resulted in looser extracellular protein configurations. The results of the metagenomics study showed that the abundance of Candidatus Kuenenia and its genes encoding nitrogen removal-related enzymes was reduced. The abundance of hzs-γ was reduced by 35.09 % at a concentration of 5 mg/L Cu(II). Conversely, genes associated with metal efflux enzymes, like czcR, increased by 54.86 % at 2 mg/L Cd(II). Molecular docking revealed robust bindings of Cd(II) to HZS-α (−342.299 ± 218.165 kJ/mol) and Cu(II) to HZS-γ (−880.934 ± 55.526 kJ/mol). This study elucidated the inhibitory mechanisms of Cd(II) and Cu(II) on the anammox system, providing insights into the resistance of anammox bacteria to heavy metals. [Display omitted] • Cu(II) and Cd (II) had inhibitory effect on NRE. • Cu (II) and Cd (II) significantly alter the secondary structure of EPS proteins. • Cu (II) and Cd (II) significantly alter the gene abundance of microorganisms. • Cu (II) and Cd (II) bind to functional enzymes of the nitrogen and Ferrous pathways. • Heavy metals attack AnAOB from both intracellular and extracellular perspectives. [ABSTRACT FROM AUTHOR]

The excessive accumulation of Cd and Zn in soil poisons crops and threatens food safety. In this study, KMnO 4 -hematite modified biochar (MnFeB) was developed and applied to remediate weakly alkaline Cd-Zn contaminated soil, and the heavy metal immobilization effect, plant growth, and metal ion uptake of foxtail millet were studied. MnFeB application reduced the phytotoxicity of soil heavy metals; bioavailable acid-soluble Cd and Zn were reduced by 57.79% and 35.64%, respectively, whereas stable, non-bioavailable, residual Cd and Zn increased by 96.44% and 32.08%, respectively. The chlorophyll and total protein contents and the superoxide dismutase (SOD)activity were enhanced, whereas proline, malondialdehyde, the H 2 O 2 content, glutathione reductase (GR), ascorbate peroxidase (APX) and catalase (CAT) activities were reduced. Accordingly, the expressions of GR, APX, and CAT were downregulated, whereas the expression of MnSOD was upregulated. In addition, MnFeB promoted the net photosynthetic rate and growth of foxtail millet plants. Furthermore, MnFeB reduced the levels of Cd and Zn in the stems, leaves, and grains, decreased the bioconcentration factor of Cd and Zn in shoots, and weakened the translocation of Cd and Zn from roots to shoots. Precipitation, complexation, oxidation-reduction, ion exchange, and π-π stacking interaction were the main Cd and Zn immobilization mechanisms, and MnFeB reduced the soil bacterial community diversity and the relative abundance of Proteobacteria and Planctomycetota. This study provides a feasible and effective remediation material for Cd- and Zn-contaminated soils. [Display omitted] • Novel method to treat heavy metal-contaminated alkaline soil using MnFe biochar. • MnFe biochar promotes conversion of soil heavy metal to less bioavailable forms. • MnFe biochar alleviated phytotoxicity and provided iron for chlorophyll synthesis. • Plant parameters and photosynthetic rate were higher after biochar treatment. • MnFeB improves food safety by reducing heavy metal content in above-ground parts. [ABSTRACT FROM AUTHOR]

At present, a clear dependency of the dynamics upon temperature and pH has not been established for many heavy metals (HMs), so making it difficult to project and quantify the impact of ocean warming and acidification on metal biogeochemistry in future scenarios. To understand the responses of HMs to future ocean warming and acidification, we estimated the spatial-temporal variations and pollution status of six dissolved HMs (i.e., Cu, Zn, Pb, Cd, Hg, and As) in surface seawater throughout the Bohai Sea during 2012–2014. The results showed that the average concentrations of Cu, Zn, Pb, Cd, Hg, and As in seawater of the Bohai Sea were between 2.01–3.18, 10.47–15.58, 0.85–2.31, 0.25–0.55, 0.05–0.13, and 1.24–1.98 μg L-1, respectively. Spatially, the average concentrations of the studied HMs generally decreased from the three bays towards the central area, except for Hg which was relatively high in the central Bohai Sea in some cases. This implied that, in addition to continental inputs, there may be other processes affecting the distribution pattern of Hg, such as cyclonic or anticyclonic gyres, benthic fluxes between surface and bottom layers, and some marine planktonic and microbial activities. The pollution assessments of six HMs in seawater revealed that the major risk pollutants were Pb and Hg across the Bohai Sea. Analyses of the local and interactive effects of temperature and pH on HMs showed that the interactive effect of changing temperature and pH on HMs is much more complex than a direct temperature/pH relationship with HMs. Altogether, the results suggested that future ocean warming and acidification will significantly influence the concentrations of dissolved HMs in seawater of the Bohai Sea, but with different relationships. [Display omitted] • Most of the studied heavy metals declined from the three bays to the centre of the Bohai Sea; • The major risk agents in seawater were Pb and Hg across the whole Bohai Sea; • Rising temperature or pH decline significantly affected the dynamics of heavy metals; • Ocean warming and acidification will modify the speciation and nature of heavy metals. [ABSTRACT FROM AUTHOR]

Photodegradation of plastic consumer products is known to accelerate weathering and facilitate the release of chemicals and plastic particles into the aquatic environment. However, these processes are complex. In our presented pilot study, eight plastic consumer products were leached in distilled water under strong ultraviolet (UV) light simulating eight months of Central European climate and compared to their respective dark controls (DCs). The leachates and formed plastic particles were exploratorily characterized using a range of chemical analytical tools to describe degradation and leaching processes. These techniques covered (a) microplastic analysis, showing substantial liberation of plastic particles further increased under UV exposure, (b) non-targeted mass spectrometric characterization of the leachates, revealing several hundreds of chemical features with typically only minor agreement between the UV exposure and the corresponding DCs, (c) target analysis of 71 organic analytes, of which 15 could be detected in at least one sample, and (d) metal(loid) analysis, which revealed substantial release of toxic metal(loid)s further enhanced under UV exposure. A data comparison with the US-EPA's ToxVal and ToxCast databases showed that the detected metals and organic additives might pose substantial health and environmental concerns, requiring further study and comprehensive impact assessments. [Display omitted] • Plastic products leach complex mixtures of particles, chemicals and metals into water. • Leaching was more explicit under artificial UV irradiation compared to dark controls. • Complementary analytical tools give a unique, comprehensive assessment. [ABSTRACT FROM AUTHOR]

During the process of black shale weathering, multiple heavy metal elements are concentrated in the soil, causing pollution. This study selected soil and black shale bedrock samples from high geological background areas to investigate the control of heavy metal element pollution by bedrock using spatial analysis. The research results indicate that the heavy metal content in black shale bedrock is extremely high, ranging from 2.3 to 13.1 times the background values of rock heavy metal elements. The heavy metal content in the soil formed through weathering is positively correlated with the bedrock, ranging from 1.1 to 21.3 times the background values. The coefficient of variation of rock samples ranges from 1.09 to 7.18, indicating significant variability.The analysis reveals that the control ability of pure rock over heavy metal elements is mainly moderate and high, accounting for over 70 %, with d being the most affected metal element. Except for As, the other seven elements exhibit strong spatial autocorrelation, showing distinct regional distribution characteristics. The soil elements demonstrate high homogeneity, with heavy metal elements from black shale bedrock primarily released through weathering serving as the main source of these elements. [Display omitted] • Excessive heavy metal elements in black shale and weathered soil in the Lushao Basin. • A comprehensive study on the soil pollution characteristics of black shale and weathered soil. • The pollution spatial characteristics of pure rock,weathering ecological risk assessment in high geological areas. • Correlation and Main Source Analysis of Heavy Metal Elements in High Geological Background. [ABSTRACT FROM AUTHOR]

Despite extensive substitution of biodegradable plastics (BPs) for conventional plastics (CPs), research on their environmental ecological consequences as microplastics (MPs) is scarce. This study aimed to fill this gap by investigating the impacts of six prototypical MPs (categorized into BMPs and CMPs) on plant growth, cadmium (Cd) translocation, and bacterial communities in contaminated sediments. Results showed both BMPs and CMPs hindered plant development; yet interestingly, BMPs provoked more pronounced physiological and biochemical changes alongside increased oxidative stress due to reactive oxygen species accumulation. Notably, most MP types promoted the absorption of Cd by plant roots potentially via a "dilution effect". BMPs also induced larger shifts in soil microbial metabolic functions compared to CMPs. Ramlibacter was identified as a key biomarker distinguishing BMPs from CMPs, with link to multiple N metabolic pathways and N assimilation. This study offers novel insights into intricate biochemical mechanisms and environmental chemistry behaviors underpinning MP-Cd interactions within the plant-microbe-sediment system, emphasizing BMPs' higher potential ecological risks based on their significant effects on plant health and microbial ecology. This work contributes to enhancing the comprehensive understanding of their ecological implications and potential threats to environmental security. [Display omitted] • MPs distinctly altered the physio-biochemical characteristics of plants. • All tested BMPs and TMPs hindered the translocation of Cd upward to aerial parts. • Comprehensive analysis showed plants were more sensitive to BMPs. • BMPs-treated sediments exhibited greater shifts in bacterial composition and function. • Ramlibacter was identified as a key biomarker differentiating BMPs from CMPs. [ABSTRACT FROM AUTHOR]

Fish represent a significant source of nutrients but also cause negative health effects due to their bioaccumulation capacity for pollutants. The aim of this study was to examine the transfer of metals from the water of several rivers (Somes, Tisa, Sasar, Lapus, Lăpusel) to fish (Caras sp) tissue (subcutaneous fat, muscles, liver, intestines, kidneys, gills, brain, and eyes) and to identify and assess the carcinogenic and non-carcinogenic health risks of Arsenic (As), Cadmium (Cd), Nickel (Ni), Manganese (Mn), Cooper (Cu), Lead (Pb), Chromium (Cr) and Zinc (Zn) through the ingestion of fish (muscles and subcutaneous fat tissues). The obtained results indicated that a diet consisting of fish is particularly vulnerable, particularly in children compared to adults. The risk assessment results were below the threshold limit, although the fish samples contained heavy metals, with values exceeding the permitted limits of Fe (4.41–1604 mg/kg), Cr (727–4155 µg/kg), Zn (4.72–147 mg/kg), and Ni (333–2194 µg/kg). The studied surface waters are characterized by low and high degrees of pollution with heavy metals, as indicated by the heavy metal pollution index scores (HPI: 12.4–86.4) and the heavy metal evaluation index scores (HEI: 1.06–17.6). The considerable pollution levels are attributed to the high Mn content (0.61–49.7 µg/kg), which exceeded the limit up to fifty times. A consistent set of physico-chemical analysis (pH, electrical conductivity, total hardness, turbidity, chloride, sulphate, nitrate, nitrite, ammonium, Ca, Mg, Na, K) was analysed in water samples as well. Considering the water quality index scores (WQI: 16.0–25.2), the surface waters exhibited good quality. Microbiological results indicated the presence of Listeria monocytogenes and atypical colonies of coagulase-positive staphylococcus in fish. In contrast, the surface waters from which fish samples were collected were positive for Escherichia coli , and coliform bacteria intestinal Enterococci. Based on the study's results, it is recommended to exercise caution in the case of children related to the consumption of fish and using the waters for drinking purposes. This study provides important data of considerable novelty to the riparian population, researchers, and even policy makers on the quality status and potential levels of contamination of river waters, fish and the bioaccumulation of heavy metals in fish that may cause adverse effects on human health if consumed, and similarly the heavy metal pollution degree of waters and the non-carcinogenic risk of heavy metals through ingestion and skin absorption of water in children and adults (the study area is a significant source of fisheries). [Display omitted] • Water was extremely polluted with Mn, indicating high pollution degree. • Abundant amount of Fe, Zn, Mn determined in fish tissues exceeding the limits. • No non-carcinogenic human health risk at cumulated toxins through fish ingestion. • L. monocytogenes found in muscles tissue in fish due to contaminated environment. • Microbial contamination in some rivers with atypical colonies of S. aureus. [ABSTRACT FROM AUTHOR]

Recent research has highlighted the ecological risk posed by microplastics (MPs) from mulching film and heavy metals to soil organisms. However, most studies overlooked real environmental levels of MPs and heavy metals. To address this gap, pristine and aged polyethylene (PE) mulching film-derived MPs (PMPs, 500 mg/kg; AMPs, 500 mg/kg) were combined with cadmium (Cd, 0.5 mg/kg) to assess the acute toxicity to earthworms and investigate associated molecular mechanisms (oxidative stress, osmoregulation pressure, gut microbiota, and metabolic responses) at environmentally relevant concentrations. Compared to Cd alone and Cd + PMPs treatments (11.15 ± 4.19 items/g), Cd + AMPs treatment resulted in higher MPs bioaccumulation (23.73 ± 13.14 items/g), more severe tissue lesions, and increased cell membrane osmotic pressure in earthworms' intestines. Cd + AMPs induced neurotoxicity through elevated levels of glutamate and acetylcholinesterase. Earthworm intestines (0.98 ± 0.49 to 3.33 ± 0.37 mg/kg) exhibited significantly higher Cd content than soils (0.19 ± 0.01 to 0.51 ± 0.06 mg/kg) and casts (0.15 ± 0.01 to 0.25 ± 0.05 mg/kg), indicating PE-MPs facilitated Cd transport in earthworms' bodies. Metabolomic analysis showed Cd + AMPs exposure depleted energy and nucleotide metabolites, disrupted cell homeostasis more profoundly than Cd and Cd + PMPs treatments. Overall, co-exposure to AMPs + Cd induced more severe neurotoxicity and disruption of homeostasis in earthworm than Cd and PMPs + Cd treatments. Our study, using Cd and MPs with environmental relevance, underscores MPs' role in amplifying Cd accumulation and toxicity in earthworms. [Display omitted] • The toxic mechanisms of PE-MPs and Cd on earthworms were studied at environmentally relevant concentrations. • PE-MPs sized 0 − 100 µm are more likely to be accumulated in earthworms' intestines. • The co-exposure of aged PE-MPs and Cd disrupted cell homeostasis in earthworms. • Co-exposure to aged PE-MPs and Cd induced more severe neurotoxicity in earthworms. [ABSTRACT FROM AUTHOR]

Understanding the interaction mechanisms between complex heavy metals and soil components is a prerequisite for effectively forecasting the mobility and availability of contaminants in soils. Soil organic matter (SOM), with its diverse functional groups, has long been a focal point of research interest. In this study, four soils with manipulated levels of SOM, cadmium (Cd) and lead (Pb) were subjected to a 90-day incubation experiment. The competitive interactions between Cd and Pb in soils were investigated using Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and X-ray adsorption near-edge structure (XANES) analysis. Our results indicate that Pb competed with Cd for adsorption sites on the surface of SOM, particularly on carboxyl and hydroxyl functional groups. Approximately 22.6 % of Cd adsorption sites on humus were occupied by Pb. The use of sequentially extracted exchangeable heavy metals as indicators for environment risk assessments, considering variations in soil physico-chemical properties and synergistic or antagonistic effects between contaminants, provides a better estimation of metal bioavailability and its potential impacts. Integrating comprehensive contamination characterization of heavy metal interactions with the soil organic phase is an important advancement to assess the environmental risks of heavy metal dynamics in soil compared to individual contamination assessments. [Display omitted] • Pb inhibited the partitioning of Cd onto SOM, causing it to migrate into the mineral fraction. • Pb competes with Cd for binding sites on carboxyl and hydroxyl functional groups on the SOM surface. • Competitive effects between Pb and Cd are more pronounced in soils with high OM content. • Conventional risk assessment lead to an underestimation of the risk posed by composite heavy metals. [ABSTRACT FROM AUTHOR]

To overcome challenges in assessing the impact of environmental factors on heavy metal accumulation in soil due to limited comprehensive data, our study in Yangxin County, Hubei Province, China, analyzed 577 soil samples in combination with extensive big data. We used machine learning techniques, the potential ecological risk index, and the bivariate local Moran's index (BLMI) to predict Cr, Pb, Cd, As, and Hg concentrations in cultivated soil to assess ecological risks and identify pollution sources. The random forest model was selected for its superior performance among various machine learning models, and results indicated that heavy metal accumulation was substantially influenced by environmental factors such as climate, elevation, industrial activities, soil properties, railways, and population. Our ecological risk assessment highlighted areas of concern, where Cd and Hg were identified as the primary threats. BLMI was used to analyze spatial clustering and autocorrelation patterns between ecological risk and environmental factors, pinpointing areas that require targeted interventions. Additionally, redundancy analysis revealed the dynamics of heavy metal transfer to crops. This detailed approach mapped the spatial distribution of heavy metals, highlighted the ecological risks, identified their sources, and provided essential data for effective land management and pollution mitigation. [Display omitted] • Machine learning models predicted heavy metal levels in cultivated soils accurately. • Random Forest model identified key factors influencing heavy metal accumulation. • Assessed ecological risks, identifying Cd and Hg as key concerns via the risk index. • Spatial correlation was found between ecological risks and environmental factors. [ABSTRACT FROM AUTHOR]

Heavy metals present in aquatic ecosystems constitute a significant threat to both the environment and human health. In this study, we analyzed various heavy metals (As, Cr, Co, Ni, Cu, Mo, Cd, Pb and Sb) using extensive surface water samples collected from the Tibetan Plateau in 2021 and 2023. Results showed that downstream water samples exhibited higher content (mean 12.6 μg/L) of heavy metals compared to those from the glacier basins. It is noteworthy that heavy metal content varied significantly both in the glacier basin and downstream (4.6–29.1 μg/L and 7.8–55.2 μg/L, respectively). However, elevated concentrations at certain sites (e.g., Saga County and Dangque Zangbu River) were primarily attributed to the disproportionate contribution of individual heavy metals, possibly stemming from specific human activities or natural conditions. In the glacier basin, only Cr exhibited a decreasing trend in enrich factors (EF) with increasing Sc concentration, whereas, in the downstream areas, most elements displayed a declining trend. Furthermore, apart from a few sampling sites, heavy metal concentrations in the glacier basin remained relatively balanced, suggesting that these metals predominantly originate from natural sources. The values of potential ecological risk for an individual element (E r i) and potential ecological risk index (PER) indicate that the ecological and human risks associated with almost heavy metals (except As) in the aquatic ecosystem are minimal. Heavy metals in aquatic ecosystems pose a significant threat to ecological and human health. Due to delicate ecological balance of the Tibetan Plateau and its critical role as a water resource, we analyzed various heavy metals (As, Cr, Co, Ni, Cu, Mo, Cd, Pb and Sb) concentrations and EF in land surface river water, to find out the pollution levels and possible sources of heavy metals in the aquatic ecosystems. The results of risk assessment showed that the prevention and management of arsenic in Tibetan Plateau needs attention, but most heavy metals pose no threaten to ecological and human health. [Display omitted] • The heavy metal content in downstream water samples exhibited higher levels. • The impact of bedrock erosion and human activities in downstream is strong. • Most heavy metals (except As) pose weak threaten to ecological and human health. [ABSTRACT FROM AUTHOR]

In the present investigation, we utilized zinc nanoparticles (Zn-NPs) and bacterial endophytes to address the dual challenge of heavy metal (HM) toxicity in soil and Rhizoctonia solani causing root rot disease of tomato. The biocontrol potential of Bacillus subtilis and Bacillus amyloliquefaciens was harnessed, resulting in profound inhibition of R. solani mycelial growth and efficient detoxification of HM through strong production of various hydrolytic enzymes and metabolites. Surprisingly, Zn-NPs exhibited notable efficacy in suppressing mycelial growth and enhancing the seed germination (%) while Gas chromatography-mass spectrometry (GC-MS) analysis unveiled key volatile compounds (VOCs) crucial for the inhibition of pathogen. Greenhouse trials underscored significant reduction in the disease severity (%) and augmented biomass in biocontrol-mediated plants by improving photosynthesis-related attributes. Interestingly, Zn-NPs and biocontrol treatments enhanced the antioxidant enzymes and mitigate oxidative stress indicator by increasing H 2 O 2 concentration. Field experiments corroborated these findings, with biocontrol-treated plants, particularly those receiving consortia-mediated treatments, displayed significant reduction in disease severity (%) and enhanced the fruit yield under field conditions. Root analysis confirmed the effective detoxification of HM, highlighting the eco-friendly potential of these endophytes and Zn-NPs as fungicide alternative for sustainable production that foster soil structure, biodiversity and promote plant health. [Display omitted] • Endophytes as biocontrol induce resistance in tomato plants. • Bacillus consortia had higher efficiency than sole strains. • Consortia and Zn-NPs detoxify heavy metals (HM) in soil and rigid plants against biotic stress by enhancing PR-proteins and antioxidants. • Consortia and Zn-NPs enhanced the productivity and suppressed natural infection of R. solani. [ABSTRACT FROM AUTHOR]

This study investigates the co-precipitation of calcium and barium ions in hypersaline wastewater under the action of Bacillus licheniformis using microbially induced carbonate precipitation (MICP) technology, as well as the bactericidal properties of the biomineralized product vaterite. The changes in carbonic anhydrase activity, pH, carbonate and bicarbonate concentrations in different biomineralization systems were negatively correlated with variations in metal ion concentrations, while the changes in polysaccharides and protein contents in bacterial extracellular polymers were positively correlated with variations in barium concentrations. In the mixed calcium and barium systems, the harvested minerals were vaterite containing barium. The increasing concentrations of calcium promoted the incorporation and adsorption of barium onto vaterite. The presence of barium significantly increased the contents of O-C O, N-C O, and Ba-O in vaterite. Calcium promoted barium precipitation, but barium inhibited calcium precipitation. After being treated by immobilized bacteria, the concentrations of calcium and barium ions decreased from 400 and 274 to 1.72 and 0 mg/L (GB/T15454–2009 and GB8978–1996). Intracellular minerals were also vaterite containing barium. Extracellular vaterite exhibited bactericidal properties. This research presents a promising technique for simultaneously removing and recycling hazardous heavy metals and calcium in hypersaline wastewater. [Display omitted] • Probiotic B. licheniformis simultaneously removed Ba2+ and Ca2+ in hypersaline fluid. • Ca2+ promoted Ba2+ precipitation, but Ba2+ inhibited Ca2+ precipitation. • Hydrochemical index and EPS components changed greatly in Ba2+-Ca2+ fluid. • Intracelluar vaterite containing Ba was also beneficial to the Ba2+ and Ca2+ removal. • Ba-vaterite exhibited bactericidal activity against E.coli. [ABSTRACT FROM AUTHOR]

The pyrolysis and trace element mitigation characteristics are investigated by contrast to solvent extraction for four oily sludges, including storage tank bottom sediment (OS-1), scum from a wastewater separator (OS-2), white-clay-adsorbed waste oil (OS-3), and settlings from wastewater treatment (OS-4). Slow pyrolysis at 700 °C generated a single oil phase for OS-1 and separate oil and aqueous phases for OS-2, OS-3 and OS-4. Up to 73.0–88.3 % of the total energy were recovered from OS-1, OS-2 and OS-3 in the oil phase with 19.9–77.1 % oil yield; however, the oil phase from OS-4 accounted for only 13.3 % of the total energy, while the aqueous product accounted for 68.0 % of the total energy. Quantification of 16 trace elements revealed that OS-2 and OS-4 had much higher contents of Cu/Zn/As/Se/Cd/Pb and Ni/Cu/Zn/Se/Cd contents than the average crustal abundances, respectively. Correlations between evaporation and extraction rates indicated that the mitigation behaviors of trace elements were related to their occurrence modes in different oily sludges. Except for Cd, As and Se, all other trace elements were enriched in the pyrolysis residues of the oily sludges. Ni in the pyrolysis residue of OS-4 posed a moderate potential ecological risk. [Display omitted] • Pyrolysis oils appeared as a single or separate oil and aqueous phases. • Pyrolysis oil phases from three oil sludges had energy recoveries of 73.0–88.3 %. • Trace elements showed evaporation characteristics correlating to extraction rates. • Only a heavy metal Ni in pyrolysis residue of OS-4 had moderate ecological risk. [ABSTRACT FROM AUTHOR]

Both polycyclic aromatic hydrocarbons (PAHs) and heavy metals persist in the environment and are toxic to organisms. Their co-occurrence makes any of them difficult to remove during bioremediation and poses challenges to environmental management and public health. Microorganisms capable of effectively degrading PAHs and detoxifying heavy metals concurrently are required to improve the bioremediation process. In this study, we isolated a new strain, Sphingobium sp. SJ10–10, from an abandoned coking plant and demonstrated its capability to simultaneously degrade 92.6 % of 75 mg/L phenanthrene and reduce 90 % of 3.5 mg/L hexavalent chromium [Cr(VI)] within 1.5 days. Strain SJ10–10 encodes Rieske non-heme iron ring-hydroxylating oxygenases (RHOs) to initiate PAH degradation. Additionally, a not-yet-reported protein referred to as Sphingobium chromate reductase (SchR), with low sequence identity to known chromate reductases, was identified to reduce Cr(VI). SchR is distributed across different genera and can be classified into two classes: one from Sphingobium members and the other from non - Sphingobium species. The widespread presence of SchR in those RHO-containing Sphingobium members suggests that they are excellent candidates for bioremediation. In summary, our study demonstrates the simultaneous removal of PAHs and Cr(VI) by strain SJ10–10 and provides valuable insights into microbial strategies for managing complex pollutant mixtures. [Display omitted] • Sphingobium sp. SJ10-10 simultaneously degrades PAH and reduces Cr(VI). • SJ10-10 encodes RHOs to degrade PAH. • A not-yet-reported Sphingobium chromate reductase SchR is identified. • Many Sphingobium members simultaneously encode SchR and RHOs. • Sphingobium members have the potential to treat PAH-Cr(VI) contaminant mixtures. [ABSTRACT FROM AUTHOR]

Microplastics (MPs), omnipresent contaminants in the ocean, could be carried by seawater intrusion into coastal aquifers, which might affect the fate of heavy metals existing in aquifers. Herein, we investigated the release behavior of arsenic (As) in coastal aquifers during MPs-containing seawater intrusion by applying laboratory experiment and numerical simulation. We found that seawater with marine MPs enhanced the release of As in aquifers, especially for dissolved As(V) and colloidal As. Negatively charged MPs competed with As(V) for the adsorption sites on iron (hydr)oxides in aquifers, resulting in the desorption of As(V). In addition, MPs could promote the release of Fe-rich colloids by imparting negative charge to its surface and providing it with sufficient repulsive force to detach from the matrix, thereby leading to the release of As associated with Fe-rich colloid. We also developed a modeling approach that well described the transport of As in coastal aquifer under the impact of MPs, which coupled variable density flow and kinetically controlled colloids transport with multicomponent reactive transport model. Our findings elucidated the enhancement of MPs on the release of As in aquifers during seawater intrusion, which provides new insights into the risk assessment of MPs in coastal zones. [Display omitted] • Marine MPs carried by seawater intrusion enhance As release in coastal aquifer. • MPs promote the release of dissolved As(V) due to the competitive adsorption. • MPs facilitate the mobilization of As bound to Fe-rich colloids. • A reactive model is constructed to describe As transport in coastal aquifer. [ABSTRACT FROM AUTHOR]

Electrochemical advanced oxidation processes (EAOP) have shown great potential for the abatement of complexed heavy metals, such as metal-EDTA complexes, in recent studies. While removal of metal-EDTA complexes has been extensively examined in bench-scale reactors, much less attention has been given to the efficacy of this process at larger scale. In this study, we utilize a 72 L pilot-scale continuous flow system comprised of six serpentine flow channels and 90 pairs of flow-through electrodes for the degradation of Ni-EDTA complexes and removal of Ni from solution. The influence of a range of key operating parameters including flow rate, current density and initial Ni-EDTA concentration on rate and extent of Ni-EDTA degradation and Ni removal were examined. Our results showed that at a feed flow rate of 36 L h−1, current density of 5 mA cm−2 and initial Ni-EDTA concentration of 1 mM, the pilot-scale system achieved 74 % total Ni removal, 78 % total EDTA removal and 40 % TOC removal with energy consumption of 13.6 kWh m−3 order−1 and energy efficiency of 7.9 g kWh−1 for total Ni removal. A mechanistically-based kinetic model, which was developed in our previous bench-scale study, provides a satisfactory description of the experimental results obtained in the pilot-scale unit. Long term operation of the pilot-scale unit resulted in corrosion of PbO 2 anode along with inorganic scaling as well as organic fouling on the PbO 2 surface resulting in an obvious decline in Ni-EDTA degradation. Overall, the results of this study suggest that large scale anodic oxidation of wastewaters containing metal-organic complexes is an effective means of degrading organic ligands thereby enabling removal of the metal at the cathode. However, additional efforts are required to enhance the durability of the anode material and reduce material costs and energy consumption. [Display omitted] • Flow-thru electrochem AOP system with 90 electrode pairs used to degrade Ni-EDTA. • Oxidation of EDTA at the anode enabled removal of Ni at the cathode. • A mechanistically-based kinetic model satisfactorily described results obtained. • Long term operation resulted in inorganic scaling and organic fouling of PbO 2 anode. [ABSTRACT FROM AUTHOR]

The admixture of heavy metals on struvite during the P recovery process from wastewater will affect its value for safe agricultural application, but it is not clear how to effectively separate heavy metals from struvite. Herein, a two-stage separation reactor (static and dynamic) has been developed to achieve efficient separation of heavy metals and struvite. The generation of struvite from real swine wastewater would naturally precipitate to the lowest layer under static conditions, leading to an enrichment of heavy metals (75 % Cu and 84 % Zn) in suspension. Meanwhile, phosphorus recovery from real swine wastewater results in the generation of a large amount of fines flowing out of the reactor due to the effects of suspended solids (SS), etc., making it necessary to recover phosphorus by static separation. For the dynamic separation step, we also analyzed the characteristics of struvite formation at different rotational speeds in a continuous reaction system. The results demonstrated that the shear rate of the fluid affects the particle size of struvite, which in turn determines the rate and the distribution of struvite in either primary or secondary recovery tanks. The implementation of zonal regulation in the flow field can produce a higher phosphorus efficiency (from 85.8 to 95.5 % at pH=8.1–8.2, from 93.8 to 98.5 % at pH=9.0–9.1) and a lower alkali consumption (55.56 % of alkali cost), which is favorable for the separation of struvite crystals and heavy metals (the amount of Cu and Zn metals separated increased by more than 50 %), and ultimately yield high quality of struvite. The findings in this study will provide insights for the separation and reduction of heavy metals through a combined method with dynamic and static in a continuous system, providing a reference for the safe application of struvite in agriculture. [Display omitted] • Formation of struvite helps to concentrate heavy metals in a suspension layer. • A two-stage separation reactor is an effective method of separating heavy metals. • Flow field partitioning promotes the separation of heavy metals and struvite. • Flow field regulation can improve recovery efficiency and reduce alkali input. [ABSTRACT FROM AUTHOR]

The release of sludge-derived heavy metals (HMs) to soil and their subsequent migration into groundwater poses a significant challenge for safe and low-carbon sludge land application. This study developed a predictive framework to simulate 60-year sludge land application, evaluating the risk of HMs pollution in the soil-groundwater environment and assessing the influence of soil and water properties. HYDRUS-2D simulations revealed that highly mobile Cu, Ni, and Zn penetrated a 10 m soil layer over a 60-year period, contributing to groundwater pollution. In contrast, Cr was easily sequestered within the topsoil layer after 5-years continuous operation. The non-equilibrium parameter α could serve as an indicator for assessing their potential risk. Furthermore, the limited soil adsorption sites for Pb (f = 0.02772) led to short-term (1-year) groundwater pollution at a 0.5 m-depth. Bayesian Networks model outcomes indicated that humic-like organics crucially influenced HMs transformation, enhancing the desorption of Cd, Cu, Ni, Pb, and Zn, while inhibiting the desorption for Cr. Additionally, electrical conductivity promoted the release of most HMs, in contrast to the Mn mineralogy in soil. This study bridges the gap between the macro-level HMs migration trends and the micro-level adsorption-desorption characteristics, providing guidance for the safe land application of sewage sludge. This study introduces a framework integrating HYDRUS-2D simulations with Bayesian Networks to assess the risks of groundwater pollution by heavy metals (HMs) over a 60-year sludge application. Sludge-derived Cu, Ni, and Zn are found to penetrate soil up to 10 m and exceed safety limits, with the non-equilibrium parameter α serving as an indicator for pollution risk. The importance of nutrients from sludge-amended soil for the transformation of HMs in the subsurface environment highlights the need for enhanced sludge management, specifically through more detailed regulation of nutrient composition. These findings contribute to developing precise strategies for the long-term sludge land application. [Display omitted] • A novel framework for predicting risks of heavy metals in subsurface was proposed. • Non-equilibrium parameter (α) served as an indicator for Cu, Ni, Zn, and Cr risks. • Faction of equilibrium sites (f) acted as an indicator for risk related to Pb. • Humic-like organics from sludge-amended soil raised release of Cd, Cu, Ni, Pb, Zn. • EC promoted the leaching of heavy metals, in contrast to the Mn mineralogy in soil. [ABSTRACT FROM AUTHOR]

To address the serious environmental pollution problems of toxic heavy metal ions in water bodies, a novel fluorescent composite hydrogel N, P-CDs@CMC/PEI with a bio-based polymer matrix of carboxylmethyl cellulose (CMC), polyethylenimine (PEI) as a second interpenetrating network and N, P-doped carbon dots (N, P-CDs) as a fluorescent probe was prepared for simultaneous detection and capture of HMIs by a facile and simple one-step approach. The morphology, chemical structure, swelling ratio, mechanical strength and fluorescence property of these composite hydrogels were studied through varied characterization methods. The composite hydrogel showed sensitive and selective fluorescence response with Hg(II) and Fe(III) and the according LOD values were 0.48 and 0.27 mg L−1, respectively. The relationship between the types of the adsorbent, pH value, HMIs concentration and temperature on the adsorption capacity of these composite hydrogels were studied. The pseudo-second-order model and Langmuir model were applicable to explain the adsorption process of CPH 2 for Hg(II) and Cr(VI). The maximum calculated adsorption capacities for the above targeted HMIs by Langmuir model were 846.7 and 289.5 mg g−1, respectively. Coexisting inorganic salts and organic acids in low concentration had little effects on Hg(II) and Cr(VI) removal and the composite hydrogel showed good recyclability and stability for Hg(II) and Cr(VI) removal after four cycles. The electrostatic attraction and coordination covalent bonds were responsible for the adsorption process. [Display omitted] • A novel bio-based fluorescent composite hydrogel (N, P-CDs@CMC/PEI) was prepared. • The detection limit for toxic Hg(Ⅱ) was 0.48 mg L− 1 in range of 1-200 mg L− 1. • The maximum adsorption capacities for Hg(II) and Cr(VI) by Langmuir model were 846.7 and 289.5 mg g−1, respectively. [ABSTRACT FROM AUTHOR]

The study investigated the distributions of heavy metals (Cd, Cr, Cu, Mn, and Pb) between dissolved fraction (<0.7 µm) and particles (>0.7 µm) during the adsorption process. The dissolved fraction was further separated into truly dissolved (<3 kDa) and colloidal (3 kDa-0.7 µm) fractions. Significant metal adsorption occurred on the colloids, resulting in their aggregation into particles, which in turn influenced the particle adsorption kinetics. Colloids could either accelerate or inhibit the transformation of metal ions into particulates, depending on their stability. Competitive metals for colloids (Pb and Cr) were more susceptible to the effects of colloids than other elements. DOM was the predominant environmental factor influencing colloid behavior. The XDLVO theory showed that DOM enhanced the negative charge of colloids and made the colloid surface more hydrophilic, inhibiting the aggregation of colloids. DOM resulted in substantial increases in the concentrations of colloidal Pb and Cr from 0.31 μg/L and 4.58 μg/L to 20.52 μg/L and 43.51 μg/L, respectively, whereas the increment for less competitive metals (Cd and Mn) was smaller. These findings suggest that the distribution of heavy metals is influenced not only by adsorption from particles and ions but also by the complex dynamics of colloids. [Display omitted] • Colloids affect metal adsorption capacities and kinetics on particles. • Quick colloid adsorption and aggregation expedite metal ions immobilization. • Colloid behaviors and effects on metals were influenced by environmental factors. • DOM prevented colloid aggregation and increased mobile metal concentrations. • Colloid stability was determined by Lewis acid–base interactions via XDLVO theory. [ABSTRACT FROM AUTHOR]

Mycotoxins and heavy metals extensively contaminate grains and grain products, posing severe health risks. This work implements validated ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) and inductively coupled plasma mass spectrometry (ICP-MS) methods to quantify the concentration of 12 mycotoxins and five heavy metals in rice, maize, soybeans, and wheat flour samples marketed in Shanghai. The mixed contamination characteristics were analyzed using correlation cluster analysis and co-contamination index, and the probabilities of all cross combinations of contaminations were analyzed using a self-designed JAVA language program. The results showed that grains and grain products were frequently contaminated with both mycotoxins and heavy metals, mostly with deoxynivalenol (DON), 3-acetyl-deoxynivalenol (3-ADON), 15-acetyl-deoxynivalenol (15-ADON), ochratoxin A (OTA), aflatoxins, fumonisin B1 (FB1), fumonisin B2 (FB2), fumonisin B3 (FB3), arsenic (As), chromium (Cr) and cadmium (Cd). All the samples (100 %) were contaminated with two or more contaminants, and 77.3 % of the samples were co-contaminated with more than four contaminants. In cereals and cereal products, the following combinations were closely associated: (FB3 +3-ADON), (FB1 +As), (FB1 +FB2), (DON+FB1), (DON+Cd), (As+Cd), (DON+Cd+As), (FB1 +FB2 +As), and (DON+3-ADON+15-ADON). The results indicated that mycotoxins and heavy metals frequently co-occurred in Shanghai grains and grain products, and they provided primary data for safety assessments, early warnings, and regulatory measures on these contaminants to protect public health. [Display omitted] • The co-contamination of mycotoxins and heavy metals was relatively high in grains and grain products in Shanghai city. • All samples contained two or more contaminants. • The intimate interactions between mycotoxins and heavy metals were presented in the binary and ternary combinations. [ABSTRACT FROM AUTHOR]

Nowadays, effluent treatment is a severe challenge mainly because of its complex composition, which includes oil, heavy metal ions, and dyes. Developing new intelligent membranes is one of the strategies to tackle these significant challenges in wastewater treatment. In this study, we fabricated asymmetric polyethylene glycol terephthalate (PET) membranes by grafting cross-linked poly (itaconic anhydride) (CL-PITA) nanoparticles onto the irradiated face. These nanoparticles were then functionalized with polyethyleneimine (PEI) and protonated with HCl to introduce numerous active electropositive amine groups. The fundamental purpose was to increase surface roughness, introduce numerous hydrophilic groups, and modify it to create a multi-functional PET membrane to separate complex environments. The promising results demonstrated that the protonated PET- g -ITA/DVB (10) -cat membrane exhibited excellent separation efficiencies (SE) for water/light oil, water/heavy oil and oil-in-water (O/W) emulsion. Compared to PET- g -ITA/DVB (0) -cat, it showed superior performance in SE for O/W emulsion and flux decay for water/light oil after 10 cycles. More interestingly, owing to numerous positively charged active amino groups and negativley charged carboxylate groups, the intelligent membrane exhibited a high removal rate of ca. 90 % for anionic dye (congo red) and heavy metals (Cu2+ and Co2+), showing great potential in complex water treatment environments. [Display omitted] • Asymmetric PET membranes with superhydrophilic/oleophobic are fabricated. • High efficiency for separating oil-water layered mixtures and oil-water emulsions on demand. • High removal efficiency both for heavy metal ions and organic dyes from water. • The separation is only driven by gravity force. • The cross-linked microspheres enhanced the membrane's durability. [ABSTRACT FROM AUTHOR]

Microbiologically induced CaCO 3 precipitation (MICP) has been proposed as a potential bioremediation method to immobilize contaminating metals. In this study, carbonate mineralizing bacteria HJ1 and HJ2, isolated from heavy metal contaminated soil, was employed for Cd2+ and Pb2+ immobilization with or without β-tricalcium phosphate addition. Compared with the only treatments amended with strains, the combined application of β-tricalcium phosphate and HJ1 improved the immobilization rates of Cd and Pb by 1.49 and 1.70 times at 24 h, and the combined application of β-tricalcium phosphate and HJ2 increased the immobilization rates of Cd and Pb by 1.25 and 1.79 times. The characterization of biomineralization products revealed that Cd2+ and Pb2+ primarily immobilized from the liquid phase as CdCO 3 and PbCO 3 , and the addition of β-tricalcium phosphate facilitated the formation of Ca 4.03 Cd 0.97 (PO 4) 3 (OH) and Pb 3 (PO 4) 2. Also, the calcium source was related to the speciation of carbonate precipitation and improved the Cd and Pb remediation efficiency. This research demonstrated the feasibility and effectiveness of MICP combined with β-tricalcium phosphate in immobilization of Cd and Pb, which will provide a fundamental basis for future applications of MICP to mitigate soil heavy metal pollutions. [Display omitted] • Two novel carbonate mineralizing strains HJ1 and HJ2 were isolated. • Both the strains effectively immobilized Cd and Pb by more than 80%. • β-tricalcium phosphate improved immobilization of Cd and Pb by the strains. • Cd and Pb were mineralized to the CdCO3, Ca4.03Cd0.97(PO4)3(OH), PbCO3 and Pb3(PO4)2. [ABSTRACT FROM AUTHOR]

Contamination of water bodies with heavy metals poses a significant threat to human health and the environment, requiring the development of effective treatment techniques. In this context, aluminosilicates emerge as promising sorbents due to their cost-effectiveness and natural abundance. This review provides a clear, in-depth, and comprehensive description of the structure, properties, and characteristics of aluminosilicates, supporting their application as adsorbents and highlighting their diversity and adaptability to different matrices and analytes. Furthermore, the functionalization of these materials is thoroughly addressed, detailing the techniques currently used, exposing the advantages and disadvantages of each approach, and establishing comparisons and evaluations of the performances of various functionalized aluminosilicates in the extraction of heavy metals in aqueous matrices. This work aims not only to comprehensively review numerous studies from recent years but also to identify trends in the study of such materials and inspire future research and applications in the field of contaminant removal using aluminosilicates. [Display omitted] • The use of aluminosilicates as nano-adsorbents for metal ions in water is reviewed. • Aluminosilicate-based nanomaterials for heavy metal recovery are presented. • Zeolites-based nanomaterials for heavy metal recovery are reviewed. • Adsorption mechanisms for heavy metals are presented. • Trends in the sorption of heavy metals by clay minerals are presented. [ABSTRACT FROM AUTHOR]

Exogenous abscisic acid (ABA) presents a novel approach to mitigate heavy metal (HM) accumulation in plants, yet its efficacy against multiple HMs and potential enhancement methods remain underexplored. In this study, we demonstrated that the exogenous ABA application simultaneously decreased Zn, Cd and Ni accumulation by 22–25 %, 27–39 % and 60–62 %, respectively, in wild-type (WT) Arabidopsis. Conversely, ABA reduced Pb in shoots but increased its root concentration. ABA application also modulated the expression of HM uptake genes, inhibiting IRT1 , NRAMP1 , NRAMP4 , and HMA3 , and increasing ZIP1 and ZIP4 expressions. Further analysis revealed that overexpressing the ABA-importing transporter (AIT1) in plants intensified the reduction of Cd, Zn, and Ni, compared to WT. However, the inhibitory effect of exogenous ABA on Pb accumulation was mitigated in shoots with higher AIT1 expression. Furthermore, HMs-induced growth inhibition and the damage to photosynthesis were also alleviated with ABA treatment. Conclusively, AIT1's synergistic effect with ABA effectively reduces Cd, Zn and Ni accumulation, offering a synergistic approach to mitigate HM stress in plants. [Display omitted] • Exogenous ABA simultaneously decreased Zn, Cd and Ni accumulations in plants. • Although exogenous ABA reduces Pb in shoots, it increases root Pb levels. • The expression of IRT1 , NRAMP1 , NRAMP4 and HMA3 were inhibited, and ZIP1 , ZIP4 were elevated. • AIT1 overexpression enhanced ABA-induced Cd, Zn and Ni reduction. • AIT1-ABA synergy most notable for Ni reduction. [ABSTRACT FROM AUTHOR]

Electrochemical advanced oxidation processes (EAOPs) are effective in removing persistent contaminants from groundwater. However, their practical applicability depends significantly on various site-specific characteristics. Therefore, the primary objective of this investigation was to study the feasibility of EAOPs and pyrite, which is a sulfide mineral, to effectively remove the mixture of arsenic (As (III)), chromium (Cr (VI)), and sulfanilamide in groundwater. We conducted a comparison of three systems: (1) EAOP alone, (2) pyrite alone, and (3) a combined EAOP and pyrite system. In EAOP alone, sulfanilamide was effectively oxidized (80 %), while the electrochemical transformation of As(III)/Cr(VI) into As(V)/Cr(III) was limited. In just the pyrite system, As(III), Cr(VI), and sulfanilamide were adsorbed onto the surface of pyrite (60 %, 20 %, and 18 %). Neither the EAOP nor the pyrite system alone could effectively treat the contaminants mixture. Nonetheless, the combined system completely removed As(III), Cr(VI), and sulfanilamide by the synergistic reaction. This could be attributed to the formation of green rust, a natural adsorbent mineral produced as a reaction of dissolved iron, generated via electrochemical pyrite oxidation, with the groundwater electrolyte (e.g., CO 3 or SO 4). This system harmonized the combined approach of EAOP and pyrite to effectively eliminate both organic and inorganic contaminants. A paper proposed electrochemical oxidation (EO) with pyrite to remove both organic and inorganic contaminants from groundwater. The removal performance of the combined system was evaluated, and the synergistic mechanism was revealed. The combination of EO and pyrite with synergistic removal effectively removed the mixture of both contaminants. This could be attributed by the formation of green-rust by electrochemical activation for pyrite. Compared to the single system of EO and pyrite alone, the combined system with EO and pyrite improved removal performance. Results suggested that the combined system could be used for green groundwater remediation. [Display omitted] • Electrochemical oxidation with pyrite removed As(III), Cr(VI), and sulfanilamide. • A combined system has a synergistic effect for removal of mixture contaminants. • The formation of green rust contributed to the removal of mixed contaminants. [ABSTRACT FROM AUTHOR]

Microbiologically induced calcite precipitation (MICP), as a newly developing bioremediation technology, could redeem heavy metal contamination in diverse scenarios. In this study, MICP bacterium Sporosarcina ureilytica ML-2 was employed to suppress the pollution of Pb, Cd and Zn in municipal sludge nutrient soil. After MICP remediation, the exchangeable Cd and Zn in sludge nutrient soil were correspondingly reduced by 31.02 % and 6.09 %, while the carbonate-bound Pb, Cd and Zn as well as the residual fractions were increased by 16.12 %, 6.63 %, 13.09 % and 6.10 %, 45.70 %, 3.86 %, respectively. In addition, the extractable Pb, Cd and Zn either by diethylenetriaminepentaacetic acid (DTPA) or toxicity characteristic leaching procedure (TCLP) in sludge nutrient soil were significantly reduced. These results demonstrated that the bio-calcite generated via MICP helped to immobilize heavy metals. Furthermore, MICP treatment improved the abundance of functional microorganisms related to urea cycle, while reduced the overall abundance of metal resistance genes (MRGs) and antibiotic resistance genes (ARGs). This work confirmed the feasibility of MICP in remediation of heavy metal in sludge nutrient soil, which expanded the application field of MICP and provided a promising way for heavy metal pollution management. [Display omitted] • MICP tech could improve the stability of Pb, Cd and Zn in sludge nutrient soil. • The exchangeable Cd reduced by maximum 31.2 % contents after MICP remediated. • The carbonated and residual contents of Pb, Cd and Zn increased after remediated. • The extracted contents of DTPA & TCLP-Pb, Cd and Zn were reduced after remediated. • MICP improved the abundance of functional microbes and reduced resistance genes. [ABSTRACT FROM AUTHOR]

Phytoremediation, an eco-friendly approach for mitigating heavy metal contamination, is reliant on hyperaccumulators. This study focused on Leersia hexandra Swart, a known chromium (Cr) hyperaccumulator with demonstrated tolerance to multiple heavy metals. Our objective was to investigate its response to simultaneous Cr and nickel (Ni) stress over 12 days. Results from physiological experiments demonstrated a significant increase in the activities of antioxidant enzymes (APX, SOD, CAT) and glutathione (GSH) content under Cr and Ni stress, indicating enhanced antioxidant mechanisms. Transcriptome analysis revealed that stress resulted in the differential expression of 27 genes associated with antioxidant activity and metal binding, including APX, SOD, CAT, GSH, metallothionein (MT), and nicotinamide (NA). Among them, twenty differentially expressed genes (DEGs) related to GSH metabolic cycle were identified. Notably, GSTU6 , GND1 , and PGD were the top three related genes, showing upregulation with fold changes of 4.57, 6.07, and 3.76, respectively, indicating their crucial role in metal tolerance. The expression of selected DEGs was validated by quantitative real-time PCR, confirming the reliability of RNA-Seq data. Metabolomic analysis revealed changes in 1121 metabolites, with amino acids, flavonoids, and carbohydrates being the most affected. Furthermore, glucosinolate biosynthesis and amino acid biosynthesis pathways were represented in the KEGG pathway of differentially expressed metabolites (DEMs). This study provides insights into the tolerance mechanisms of L. hexandra under the co-stress of Cr and Ni, offering a new perspective for enhancing its remediation performance. [Display omitted] • Novel tolerance mechanisms in L. hexandra have been analyzed. • Co-stress with Cr and Ni increased amino acid and flavonoid content in L. hexandra. • Upregulation of ABCC10 , SODCC2 , GSTM1 , and NAS3 contributes to Cr and Ni tolerance. • GSH metabolic pathways and TCA cycle are vital for Cr and Ni detoxification. [ABSTRACT FROM AUTHOR]

Hazardous heavy metals and organic substances removal is of great significance for ensuring the safety of aquatic-ecosystem, yet the highly effective and selective extraction always remains challenging. To address this problem, magnetic hollow microcubes were fabricated through thermal carbonization of Fe 3 O 4 -COOH@ γ-CD-MOFs, and core-shell structured precursors were in-situ greenly constructed on a large scale via microwave-assisted self-assembly strategy. As noted, the development of secondary crystallization was utilized to achieve uniform dispersion of cores within MOFs frameworks and thus improved magnetic and adsorption ability of composites. Acquired magnetic Fe 3 O 4 @HC not only can harvest excellent extraction of heavy metals (Cd, Pb, and Cu of 129.87, 151.05, and 106.98 mg·g−1) but also exhibit highly selective adsorption ability for cationic organics (separation efficiency higher than 95.0 %). Impressively, Fe 3 O 4 @HC achieved outstanding adsorption (60–80 %) of Cd in realistic mussel cooking broth with no obvious loss in amino acid. Characterizations better offer mechanistic insight into the enhanced selectivity of positively charged pollutants can be attributed to synergistic effect of ions exchange and electrostatic interaction of abundant oxygen-containing functional groups. Our study provides a feasible route by rationally developing core-shell structured composites to promote the practical applications of sustainable water treatment and value-added utilization of processing by-products. [Display omitted] • Core-shell Fe 3 O 4 @CD-MOFs is fabricated by microwave-assisted self-assembly strategy. • Structure and dispersion of core-shell component is controlled via secondary crystallization. • Derived hollow Fe 3 O 4 @HC show outstanding affinity to heavy metals and cationic organics. • Magnetic microcubes harvest stable performance toward Cd in practical mussel cooking broth. • Selective exchange and electrostatic interaction led active sites fast adsorb cationic pollutants. [ABSTRACT FROM AUTHOR]

Both sediments and microplastics (MPs) are medias of heavy metals (HMs) in river ecosystems. This study investigated HMs (Mn, Cr, V, As, Cu, Co, Cd, Pb, and Ni) concentration and driving factors for competitive enrichment between hyporheic sediments versus MPs. The medias basic characteristics indicated that the sediments were mostly sand and rich in Fe 2 O 3 ; three polymer types were identified, with blue, fragment, less than 500 µm being the main types of MPs. The results have shown that the average content of extracted HMs in MPs was much higher than that of the same metals accumulated in sediments. HMs in sediments and MPs reached heavily polluted at some points, among which As and Cd were ecological risks. Electrostatic adsorption and surface complexation, and biofilm-mediated and organic matter complexation were the interaction mechanism of HMs with sediments and MPs. Further, the driving factors affecting the distribution of HMs in the two carriers were analyzed by multivariate statistical analysis. The results demonstrated that carrier characteristics, hydrochemical factors, and the inherent metal load of MPs were the main causes of the high HMs content. These findings improved our understanding of HMs fate and environmental risks across multiple medias. [Display omitted] • Blue, fragments, < 500 µm were the main MP types. • Cr, Cu, As, Cd, and Pb were more enriched in MPs than in sediments. • HM pollution (PLI>1 and P N >3) was present in both sediments and MPs. • Media properties, hydrochemical factors, inherent load propelled HMs enrichment. [ABSTRACT FROM AUTHOR]

Cadmium (Cd) is a heavy metal that significantly impacts human health and the environment. Microorganisms play a crucial role in reducing heavy metal stress in plants; however, the mechanisms by which microorganisms enhance plant tolerance to Cd stress and the interplay between plants and microorganisms under such stress remain unclear. In this study, Oceanobacillus picturae (O. picturae) was isolated for interaction with soybean seedlings under Cd stress. Results indicated that Cd treatment alone markedly inhibited soybean seedling growth. Conversely, inoculation with O. picturae significantly improved growth indices such as plant height, root length, and fresh weight, while also promoting recovery in soil physiological indicators and pH. Metabolomic and transcriptomic analyses identified 157 genes related to aspartic acid, cysteine, and flavonoid biosynthesis pathways. Sixty-three microbial species were significantly associated with metabolites in these pathways, including pathogenic, adversity-resistant, and bioconductive bacteria. This research experimentally demonstrates, for the first time, the growth-promoting effect of the O. picturae strain on soybean seedlings under non-stress conditions. It also highlights its role in enhancing root growth and reducing Cd accumulation in the roots under Cd stress. Additionally, through the utilization of untargeted metabolomics, metagenomics, and transcriptomics for a multi-omics analysis, we investigated the impact of O. picturae on the soil microbiome and its correlation with differential gene expression in plants. This innovative approach unveils the molecular mechanisms underlying O. picturae 's promotion of root growth and adaptation to Cd stress. [Display omitted] • O. picturae alleviates cadmium stress and enhances soybean seedling growth. • O.picturae reduces exchangeable Cd in soil, and slows Cd uptake by soybean roots. • We screened new genes and microbes related to plant responses to soil heavy metal. [ABSTRACT FROM AUTHOR]

Nitric oxide (NO) functions as an essential signalling molecule in various physiological and pathological pathways. In vitro and vivo redox processes mediated by reactive oxygen species (ROS) and nitric oxide (NO) directly influence the intracellular state. In this study, a red-emitting fluorescent nanoprobe, N,S-CDs@Zn-ICA, was synthesized to monitor NO fluctuations in living cells and zebrafish under the exposure to various pollutants. Red-emissive carbon dots (N,S-CDs) were synthesized by a hydrothermal method using o-phenylenediamine and urea as carbon / nitrogen sources, and H 2 SO 4 as sulfur source. Glutathione (GSH) was introduced to link N,S-CDs with metal organic complexes (Zn-ICA) through an amidation reaction to fabricate a carbon dot-based composite fluorescent probe, which greatly improved the selectivity, stability, and response time of the N,S-CDs. The composite probe has high selectivity and sensitivity with limit of detection (LOD) of 96.0 nM. Furthermore, the proposed probe was successfully used to monitor the dynamic changes in NO levels and evaluate oxidative stress in MCF-7 cells and zebrafish under the exposure to various pollutants, including seven heavy metal ions (such as Pb2+, Cd2+, and Hg2+) and nine organic pollutants at different concentrations and exposure times. This work provides a novel strategy for constructing highly selective and red-emitting fluorescent probe for real-time and dynamic monitoring of NO and further evaluating oxidative stress induced by pollutants in vitro and in vivo via fluorescence imaging. [Display omitted] • Red-emissive carbon dots (N,S-CDs) prepared by o-phenylenediamine, urea, and H 2 SO 4. • Combination of N,S-CDs and Zn-ICA greatly improved the selectivity and response time. • Real-time dynamic monitoring of nitric oxide in living cells and zebrafish. • Evaluating oxidative stress induced by pollutants in vitro and in vivo via fluorescence imaging. [ABSTRACT FROM AUTHOR]

Toxic metal(loid)s released into the soil by non-ferrous metal mining and smelting activities pose a serious threat to residents and the surrounding ecosystem. Considering only total metal(loid) concentrations likely overestimates routine (eco)toxicological risk assessment of soil. We hypothesize that considering metal(loid) bioavailability/accessibility will improve the accuracy of risk assessment. To test this hypothesis, four mining areas in Southwest China, including mining and surrounding sites, were studied. Bioavailability was determined considering metal(loid)s leached by a simulated strong acid rain (SSAR) treatment. In the four areas, the mining site showed higher cumulative releases of metal(loid)s under SSAR treatment than the agricultural field located in the surrounding sites. Thus, the bioavailable metal(loid)s contents were continuously being released during SSAR treatment and likely increased the environmental risk. Ecological and health risk assessment of soil, calculated using total metal(loid)s content, was corrected considering bioavailable/accessible metal(loid)s, which was determined by the heavy metal(loid)s forms and in vitro simulated intestinal stages. Although the corrected indices indicated that the risk of metal(loid)s-contaminated soil was reduced, unfavorable ecological and health risks remained in the four areas. Our study provides new perspectives to better predict the risk of bioavailable/accessible metal(loid)s in non-ferrous metal contaminated and surrounding soils. [Display omitted] • Characterization of metal(loid)s in soils affected by human activities. • Metal(loid) bioavailable fractions are generated after simulated strong acid rain. • Accurate soil risk assessment considers bioavailable/accessible metal(loid)s. [ABSTRACT FROM AUTHOR]

Cadmium (Cd) is a heavy metal pollutant mainly originating from the discharge of industrial sewage, irrigation with contaminated water, and the use of fertilizers. The phytoremediation of Cd polluted soil depends on the identification of the associated genes in hyperaccumulators. Here, a novel Cd tolerance gene (SpCTP3) was identified in hyperaccumulator Sedum plumbizincicola. The results of Cd2+ binding and thermodynamic analyses, revealed the CXXC motif in SpCTP3 functions is a Cd2+ binding site. A mutated CXXC motif decreased binding to Cd by 59.93%. The subcellular localization analysis suggested that SpCTP3 is primarily a cytoplasmic protein. Additionally, the SpCTP3 -overexpressing (OE) plants were more tolerant to Cd and accumulated more Cd than wild-type Sedum alfredii (NHE-WT). The Cd concentrations in the cytoplasm of root and leaf cells were significantly higher (53.75% and 71.87%, respectively) in SpCTP3 -OE plants than in NHE-WT. Furthermore, malic acid levels increased and decreased in SpCTP3 -OE and SpCTP3 -RNAi plants, respectively. Moreover, SpCTP3 interacted with malate dehydrogenase 1 (MDH1). Thus, SpCTP3 helps regulate the subcellular distribution of Cd and increases Cd accumulation when it is overexpressed in plants, ultimately Cd tolerance through its interaction with SpMDH1. This study provides new insights relevant to improving the Cd uptake by Sedum plumbizincicola. [Display omitted] • SpCTP3 enhanced Cd tolerance by regulating Cd in subcellular components. • SpCTP3 overexpression increased the accumulation of malic acid. • SpCTP3 interacts with SpMDH1 to stabilize the SpMDH1 protein. [ABSTRACT FROM AUTHOR]

There are many heavy metal stresses in agricultural biological systems, especially cadmium (Cd) stress, which prevent the full growth of plants, lead to a serious decline in crop yield, and endanger human health. Molybdenum (Mo), an essential nutrient element for plants, regulates plant growth mainly by reducing the absorption of heavy metals and protecting plants from oxidative damage. The aim of this study was to determine the protective effect of Mo (1 μM) application on wheat plants under conditions of Cd (10 μM) toxicity. The biomass, Cd and Mo contents, photosynthesis, leaf and root ultrastructure, antioxidant system, and active oxygen content of the wheat plants were determined. Mo increased the total chlorophyll content of wheat leaves by 43.02% and the net photosynthetic rate by 38.67%, and ameliorated the inhibitory effect of cadmium on photosynthesis by up-regulating photosynthesis-related genes and light-trapping genes. In addition, Mo reduced the content of superoxide anion (O 2 •—) by 16.55% and 31.12%, malondialdehyde (MDA) by 20.75% and 7.17%, hydrogen peroxide (H 2 O 2) by 24.69% and 8.17%, and electrolyte leakage (EL) by 27.59% and 16.82% in wheat leaves and roots, respectively, and enhanced the antioxidant system to reduce the burst of reactive oxygen species and alleviate the damage of Cd stress on wheat. According to the above results, Mo is considered a plant essential nutrient that enhances Cd tolerance in wheat by limiting the absorption, accumulation and transport of Cd and by regulating antioxidant defence mechanisms. Cadmium (Cd)，is one of the most toxic heavy metals in the environment, and Cd pollution is a global environmental problem that threatens food security and human health. Molybdenum (Mo), as an essential plant nutrient, is often used to resist environmental stress. However, the mechanism of Mo treatment on wheat subjected to Cd stress has not been reported. In this study, we systematically analysed the effects of Mo on the phenotype, physiology, biochemistry, ultrastructure and Cd content of wheat subjected to Cd stress, and comprehensively analysed the transcriptomics. It not only reveals the mechanism of Mo tolerance to Cd stress in wheat, but also provides new insights into phytoremediation and plant growth in Cd-contaminated soil. [Display omitted] • Mo mitigates the inhibitory effect of Cd on wheat seedling growth. • Mo up-regulates photosynthesis and light-trapping related genes. • Mo reduces the burst of reactive oxygen species by enhancing the antioxidant system of wheat under Cd stress. • Mo reduces Cd uptake and maintains ion homeostasis by regulating the expression of Cd related transport genes. [ABSTRACT FROM AUTHOR]

Bioaerosols are widely distributed in urban air and can be transmitted across the atmosphere, biosphere, and anthroposphere, resulting in infectious diseases. Automobile air conditioning (AAC) filters can trap airborne microbes. In this study, AAC filters were used to investigate the abundance and pathogenicity of airborne microorganisms in typical Chinese and European cities. Culturable bacteria and fungi concentrations were determined using microbial culturing. High-throughput sequencing was employed to analyze microbial community structures. The levels of culturable bioaerosols in Chinese and European cities exhibited disparities (Analysis of Variance, P < 0.01). The most dominant pathogenic bacteria and fungi were similar in Chinese (Mycobacterium : 18.2–18.9 %; Cladosporium : 23.0–30.2 %) and European cities (Mycobacterium : 15.4–37.7 %; Cladosporium : 18.1–29.3 %). Bartonella , Bordetella , Alternaria, and Aspergillus were also widely identified. BugBase analysis showed that microbiomes in China exhibited higher abundances of mobile genetic elements (MGEs) and biofilm formation capacity than those in Europe, indicating higher health risks. Through co-occurrence network analysis, heavy metals such as zinc were found to correlate with microorganism abundance; most bacteria were inversely associated, while fungi exhibited greater tolerance, indicating that heavy metals affect the growth and reproduction of bioaerosol microorganisms. This study elucidates the influence of social and environmental factors on shaping microbial community structures, offering practical insights for preventing and controlling regional bioaerosol pollution. [Display omitted] • Chinese urban had higher levels of culturable bioaerosol pollution than Europe. • Pathogens Mycobacterium and Cladosporium were highly prevalent in China and Europe. • Bacteria in China showed higher MGEs abundance and biofilm-forming capacity. • Environment and socio-economic factors shaped microbial community structure. • Heavy metals widely present in ACC influence microbial growth and reproduction. [ABSTRACT FROM AUTHOR]

Biochar is widely accepted as a green and effective amendment for remediating heavy metals (HMs) contaminated soil, but its long-term efficiency and safety changes with biochar aging in fields. Currently, some reviews have qualitatively summarized biochar aging methods and mechanisms, aging - induced changes in biochar properties, and often ignored the potential eco-environmental risk during biochar aging process. Therefore, this review systematically summarizes the study methods of biochar aging, quantitatively compares the effects of different biochar aging process on its properties, and discusses the potential eco-environmental risk due to biochar aging in HMs contaminated soil. At present, various artificial aging methods (physical aging, chemical aging and biological aging) rather than natural field aging have been applied to study the changes of biochar's properties. Generally, biochar aging increases specific surface area (SSA), pore volume (PV), surface oxygen-containing functional group (OFGs) and O content, while decreases pH, ash, H, C and N content. Chemical aging method has a greater effect on the properties of biochar than other aging methods. In addition, biochar aging may lead to HMs remobilization and produce new types of pollutants, such as polycyclic aromatic hydrocarbons (PAHs), environmentally persistent free radicals (EPFRs) and colloidal/nano biochar particles, which consequently bring secondary eco-environmental risk. Finally, future research directions are suggested to establish a more accurate assessment method and model on biochar aging behavior and evaluate the environmental safety of aged biochar, in order to promote its wider application for remediating HMs contaminated soil. [Display omitted] • Most studies used artificial aging rather than field aging to assess biochar aging. • Chemical aging change biochar's properties more than other aging methods. • Risk of HMs PAHs, EPFRs and colloidal/nano biochar during aging can't be ignored. • Accurate biochar aging method and prediction model are highly recommended. [ABSTRACT FROM AUTHOR]

Dissolved organic matter (DOM) present in aquatic environments can significantly influence microalgal metabolism and the enrichment of heavy metals. However, the specific mechanism through which typical DOM affects the enrichment of the heavy metal chromium (Cr) in green algae remains unclear. This study investigates the impacts of varying concentrations of humic acid (HA), selected as a representative DOM in water, on the growth, metabolism, and Cr enrichment in Chlorella vulgaris, a typical green alga. The results indicated that low concentrations of HA were capable of enhancing Cr enrichment in C. vulgaris, with the highest Cr enrichment rate recorded at 41.50 % at TOC = 10 mg/L. The enrichment of Cr in algal cells primarily occurred through cell proliferation and complexation reduction of extracellular polymeric substances (EPS). In the presence of HA, C. vulgaris predominantly removed Cr through extracellular adsorption, accounting for 79.76-85.88 % of the total Cr removal. Furthermore, carboxyl complexation and hydroxyl reduction within EPS facilitated both the enrichment of Cr (18.72-21.49 %) and the reduction of Cr(VI) (63.93-74.10 %). These findings provide valuable insights into strategies for mitigating heavy metal pollution and managing associated risks in aquatic environments., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The impact of co-occurring heavy metal (HM) and microplastic (MP) pollution on methane (CH 4 ) oxidation by methanotrophs (MOB) in landfill cover soil (LCS) and the role of biochar in mediating these collaborative transformations remains unclear. This study conducted batch-scale experiments using LCS treated with individual or combined HMs and MPs, with or without biochar amendment. Differentiation in methanotrophic activities, HM transformations, MP aging, soil properties, microbial communities, and functional genes across the groups were analyzed. Biochar proved essential in sustaining efficient CH 4 oxidation under HM and MP stress, mainly by diversifying MOB, and enhancing polysaccharide secretion to mitigate environmental stress. While low levels of HMs slightly inhibited CH 4 oxidation, high HM concentration enhanced methanotrophic activities by promoting electron transfer process. MPs consistently stimulated CH 4 oxidation, exerting a stronger influence than HMs. Notably, the simultaneous presence of low levels of HMs and MPs synergistically boosted CH 4 oxidation, linked to distinct microbial evolution and adaptation. Methanotrophic activities were demonstrated to affect the fate of HMs and MPs. Complete passivation of Cu was readily achieved, whereas Zn stabilization was negatively influenced by biochar and MPs. The aging of MPs was also partially suppressed by biochar and HM adsorption., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

As one of the reclamation methods of sewage sludge, land application is commonly used. Because almost all organic waste is supposed to be recycled in land use, higher application ratio is necessary. This study conducted sludge land use experiments under high application ratio, and the migration of heavy metals in soil-plant system were studied. The mixture ratio of sludge to soil was 0:1, 0.00862:1, 0.2:1 (240 DS t/hm 2 ), and 0.75:1 (900 DS t/hm 2 ), which is higher than ISO 19698: 2020 and all the Chinese standards. The results showed that the high ratio of sludge application increased the concentration of heavy metals in soil, but after planting plants, the concentration of heavy metals decreased. And compared to sunflower and black-eyed Susan, ryegrass had the best bioaccumulation and transport capacity for heavy metals. As for the residual heavy metals in the soil, compared to the application ratio of 0.00862:1, increasing the application ratio to 0.2:1 did not significantly increase the risk of heavy metals. And if sludge was applied continuously for 15 years, only Hg may have a cumulative risk at the ratio of 0.2:1, but did not exceed GB 36600-2018. Controlling the maximum application rate at 0.2 and planting ryegrass can be a feasible strategy., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The emission of microplastics and heavy metals in landfills has attracted widespread attention for its stabilization process. Microplastics have become carriers of heavy metals due to their adsorption properties, affecting their environmental behavior. However, the effects of landfill stabilization on the interaction between microplastics and heavy metals in leachate are ambiguous. This work explored the abundance characteristics of microplastics and heavy metals in leachate from 10 landfills in Beijing. Overall, the average abundance of microplastics was 196.3 items/L, dominated by small particle size (20-50 µm) and film microplastics. The levels of Cr and As were much higher than other heavy metals. The average abundance of microplastics and polymer types tended to decrease as the landfill stabilization proceeded, and the surface composition of microplastics became more complex. Statistical analysis revealed that the correlations between microplastics and heavy metals in the leachate of landfill stabilization presented significant parabolic characteristics, and Cr and As were more susceptible to landfill stabilization with significant positive correlation with a wide range of microplastics such as 20-30 µm. These results were intended to provide a scientific basis for the treatment and disposal of waste leachate and the synergistic prevention and control of new and traditional pollutants., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Paints, coatings and varnishes play a crucial role in various industries and daily applications, providing essential material protection and enhancing aesthetic characteristics. However, they sometimes present environmental challenges such as corrosion, wear, and biofouling which lead to economic losses and ecological harm. Paint particles (PPs), including antifouling/anticorrosive paint particles (APPs), originate from marine, industrial, and architectural activities, primarily due to paint leakage, wear, and removal, thus significantly contributing to marine pollution. These particles are often misclassified as microplastics (MPs) because of their polymeric content, so the abundance of these materials is often underestimated. Standardized assessment methodologies are imperative to accurately differentiate and quantify them. Since PPs/APPs incorporate hazardous substances like metals, biocides, and additives that leach into the environment, further investigation into their potential impacts on organisms is of utmost importance to understand their complex composition and toxicity. While essential characterization techniques are needed, a holistic approach, focusing on sustainable paint formulations, is crucial for effective pollution mitigation. This review delves into the intricate structure of paint systems, elucidating the mechanisms governing the aging and formation of PPs/APPs, their prevalence and subsequent environmental and ecotoxicological repercussions. Additionally, it addresses challenges in sampling, processing, and characterizing PPs/APPs, advocating standardized approaches to mitigate their environmental threats, and proposing new perspectives for the future., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

There is a long-standing debate over the effectiveness of chemical extraction methods in assessing soil metal phytoavailability. This study addresses the limitations of widely-used chemical extraction methods and presents the water-extractable pool as a more reliable indicator based on wheat pot experiments using homogenized agricultural soil amended with lime materials, phosphate, and biochar. Over 120 days' pot experiments, Cd accumulation in whole wheat plants and tissues exhibited positive relationships with water-extractable Cd concentrations at heading and maturity stage (Spearman's rho: 0.521-0.851; P < 0.05), revealing that the water-extractable pool instead of other pools better indicates wheat metal accumulation. Water-extractable metal concentrations are effective in assessing phytoavailability of metals primarily in ionic forms in soil solution (e.g, Zn, Cd), but less reliable for metals strongly complexed with dissolved organic matter (DOM) or sensitive to redox conditions. It demonstrated that water-extractable metal concentrations and chemical forms are key factors, fundamentally determined by metal properties and impacted by environmental factors. This study clarifies a more direct link between chemical extraction and plant metal uptake mechanisms. Given the extensive application of chemical extraction methods over several decades, this study will help advance soil metal risk assessment and remediation practices., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Limited data exist on the interactions between nanoplastics (NPs) and co-contaminants under diverse environmental conditions. Herein, a factorial composite toxicity analysis approach (FCTA) was developed to analyze the time-dependent composite effects of NPs (0 ∼ 60 mg/L), copper (Cu, 0.2 ∼ 6 mg/L) and phenanthrene (PHE, 0.001 ∼ 1 mg/L) on microalgae under diverse pH (6.7 ∼ 9.1), dissolved organic matter (DOM, 1.5 ∼ 25.1 mg/L), salinity (1 ∼ 417 mg/L) and temperature (23 ∼ 33 °C) within the Canadian prairie context. The toxic mechanism was revealed by multiple toxic endpoints. The combined toxicity of NPs, Cu and PHE within prairie aquatic ecosystems was assessed by the developed FCTA-multivariate regression model. Contrary to individual effects, NPs exhibited a promotional effect on microalgae growth under complex environmental conditions. Although Cu and PHE were more hazardous, NPs mitigated their single toxicity. Environmental conditions and exposure times significantly influenced the main effects and interactions of NPs, Cu and PHE. The synergistic effect of NPs*Cu and NPs*PHE on microalgae growth became antagonistic with increased pH or DOM. Microalgae in the Souris River, Saskatchewan, were projected to suffer the most toxic effects. Our findings have significant implications for the risk management of NPs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Developing countries struggle with water quality management owing to poor infrastructure, limited expertise, and financial constraints. Traditional water testing, relying on periodic site visits and manual sampling, is impractical for continuous wide-area monitoring and fails to detect sudden heavy metal contamination. To address this, plant-inspired robots capable of fully autonomous water quality monitoring are proposed. Constructed from paper, the robot absorbs surrounding water through its roots. This paper robot is controlled by paper-based microfluidic logic that sends absorbed water to petal-shaped actuators only when the water is polluted by heavy metals. This triggers the actuators to swell and bend like a blooming flower, visually signaling contamination to local residents. In tests with copper-contaminated water, the robotic flower's diameter increased from 4.69 cm to 14.89 cm, a more than threefold expansion (217.25 %). This significant blooming movement serves as a highly visible and easily recognizable indicator of water pollution, even for the public. Furthermore, the paper robot can be mass-produced at a low cost (∼$0.2 per unit) and deployed over large areas. Once installed, the paper robot operates autonomously using surrounding water as a power source, eliminating the need for external electrical infrastructure and expert intervention. Therefore, this autonomous robot offers a new approach to water quality monitoring suitable for resource-limited environments, such as Sub-Saharan Africa., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study analysed ten widely used commercial fishfeeds in aquaculture from six countries spanning three continents to assess microplastic (MP) contamination. MPs with an average abundance of 1130 ± 259.07 particles/kg and an average length of 2.64 ± 0.62 mm ( ± SE) were found in aquaculture feeds, with fibres (85 %) and fragments (15 %). The majority of these MPs were black. The abundance of MPs varied among the samples, with the highest in feed SP (26 %), followed by IF, GA, ELS, NT, EW, TB, GR, VR, and the least in HCF (3 %). Polymers identified consisted of Polyethylene terephthalates (PET, 20 %), Polyamide (PA, 30 %), Polymethyl methacrylate (PMMA), Polyurethane (PU), and Polystyrene (PS) with 15 % each, and Polypropylene (PP, 5 %). SEM-EDX analysis of fibres showed flakes, cracks, and pits and the presence of heavy metals Ni, Cu, Zn, Cr, Au, Hg, Cd, Ti, and Pb. Additionally, some fragments contained Nb (Niobium) alongside the naturally occurring elements. The Polymer Hazard Index (PHI) for the polymers in ten feeds was calculated, and nine were in the highly hazardous category (IV and V) with PHI values ranging from 400-394825. The work showcases the graveness of MPs in fishfeeds and advocates control measures to curtail MPs in fishfeeds for sustainable aquaculture production., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Both sulfur (S) supply and legume-rhizobium symbiosis can significantly contribute to enhancing the efficiency of phytoremediation of heavy metals (HMs). However, the regulatory mechanism determining the performance of legumes at lead (Pb) exposure have not been elucidated. Here, we cultivated black locust (Robinia pseudoacacia L.), a leguminous woody pioneer species at three S supply levels (i.e., deficient, moderate, and high S) with rhizobia inoculation and investigated the interaction of these treatments upon Pb exposure. Our results revealed that the root system of Robinia has a strong Pb accumulation and anti-oxidative capacity that protect the leaves from Pb toxicity. Compared with moderate S supply, high S supply significantly increased Pb accumulation in roots by promoting the synthesis of reduced S compounds (i.e., thiols, phytochelatin), and also strengthened the antioxidant system in leaves. Weakened defense at deficient S supply was indicated by enhanced oxidative damage. Rhizobia inoculation alleviated the oxidative damage of its Robinia host by immobilizing Pb to reduce its absorption by root cells. Together with enhanced Pb chelation in leaves, these mechanisms strengthen Pb detoxification in the Robinia -rhizobia symbiosis. Our results indicate that appropriate S supply can improve the defense of legume-rhizobia symbiosis against HM toxicity. [Display omitted] • High S supply significantly increased Pb accumulation in roots by promoting the synthesis of reduced S compounds. • High S strengthened the antioxidant system in leaves of Robinia under Pb. • Weakened defense at deficient S supply indicated by enhanced oxidative damage. • Root of Robinia has a strong Pb accumulation and anti-oxidative capacity that protect the leaves from Pb toxicity. • Rhizobia inoculation alleviated the oxidative damage of its Robinia host by immobilizing Pb to reduce its absorption in roots. [ABSTRACT FROM AUTHOR]

Heavy metal contamination represents a critical global environmental concern. The movement of heavy metals through the food chain inevitably subjects insect natural enemies to heavy metal stress, leading to various adverse effects. This review assesses the risks posed by heavy metal exposure to insect natural enemies, evaluates how such exposure impacts their pest control efficacy, and investigates the mechanisms affecting their fitness. Heavy metals transfer and accumulate from soil to plants, then to herbivorous insects, and ultimately to their natural enemies, impeding growth, development, and reproduction of insect natural enemies. Typically, diminished growth and reproduction directly compromise the pest control efficacy of these natural enemies. Nonetheless, within tolerable limits, increased feeding may occur as these natural enemies strive to meet the energy demands for detoxification, potentially enhancing their pest control capabilities. The production of reactive oxygen species and oxidative damage caused by heavy metals in insect natural enemies, combined with disrupted energy metabolism in host insects, are key factors contributing to the reduced fitness of insect natural enemies. In summary, heavy metal pollution emerges as a significant abiotic factor adversely impacting the pest control performance of these beneficial insects. [Display omitted] • Heavy metals can transfer along the food chain to insect natural enemies. • Heavy metal stress decreases the fitness of insect natural enemies. • Pest control performance of insect natural enemies is effected by heavy metal stress. • Oxidative damage directly reduces fitness of insect enemies under heavy metal stress. • Heavy metal-caused host energy disorder indirectly reduces fitness of insect enemies. [ABSTRACT FROM AUTHOR]