Search

Batch sorption experiments were conducted using macroreticular poly(vinyl alcohol) (MR-PVA) beads as a adsorbent to adsorb Pb(II) from both single component system and multi-metal solution in which experimental parameters were studied including solution pH, contact time, adsorbent dose, initial concentration of metal ions and ionic strength. The equilibrium isotherms were determined at pH 6 under constant ionic strength and at different temperatures. The results showed that the maximum adsorption capacity of Pb(II) (213.98 mg g(-1)) with 1 g L(-1) of adsorbent was observed at 300 mg L(-1) at an initial pH value of 6.0 under temperature of 288 K. Removals of about 60% occurred in 30 min, and equilibrium was attained at around 150 min. The equilibrium data for the adsorption of Pb(II) on MR-PVA beads was tested with various adsorption isotherm models among which three models were found to be suitable for the Pb(II) adsorption. In addition, the kinetic adsorption fitted well to the pseudo-second-order model and the corresponding rate constants were obtained. Thermodynamic aspects of the adsorption process were also investigated., (Copyright 2010 Elsevier B.V. All rights reserved.)

In this study, nanoscale Fe(0) was immobilized in and on poly(vinyl alcohol) (PVA) microspheres by the inverse suspension crosslinked method. Two different sizes of Fe(0)/PVA microspheres were synthesized in the presence and absence of dispersant. The chelating action between Fe(2+) and PVA was identified by Fourier transform infrared and X-ray photoelectron spectroscopy. The morphology and distribution of the obtained Fe(0)/PVA microspheres were characterized by environmental scanning electron microscope, energy-dispersive X-ray spectrometry, and X-ray diffraction. Nanoscale Fe(0) particles were mostly dispersed over the surface of the microspheres. They were distributed more homogeneously on the surfaces of Fe(0)/PVA microspheres with diameter of 600-700 microm than those with diameter of 10-12 microm. The nitrobenzene (NB) reduction reactions followed pseudo-first-order kinetics. The normalized surface rate constants (k(SA)) values were determined to be 0.162 L h(-1)m(-2) for L-Fe(0)/PVA microspheres, 0.098 L h(-1)m(-2) for S-Fe(0)/PVA microspheres, and 0.023 L h(-1)m(-2) for nanoscale Fe(0) particles. Furthermore, with the analysis of the products by GC/MS, possible reductive pathways of NB by Fe(0)/PVA microspheres were suggested. The recovery rates of iron in microspheres were determined to be 81.17% for large Fe(0)/PVA and 60.31% for small Fe(0)/PVA.

Abstract: Batch sorption experiments were conducted using macroreticular poly(vinyl alcohol) (MR-PVA) beads as a adsorbent to adsorb Pb(II) from both single component system and multi-metal solution in which experimental parameters were studied including solution pH, contact time, adsorbent dose, initial concentration of metal ions and ionic strength. The equilibrium isotherms were determined at pH 6 under constant ionic strength and at different temperatures. The results showed that the maximum adsorption capacity of Pb(II) (213.98mgg−1) with 1gL−1 of adsorbent was observed at 300mgL−1 at an initial pH value of 6.0 under temperature of 288K. Removals of about 60% occurred in 30min, and equilibrium was attained at around 150min. The equilibrium data for the adsorption of Pb(II) on MR-PVA beads was tested with various adsorption isotherm models among which three models were found to be suitable for the Pb(II) adsorption. In addition, the kinetic adsorption fitted well to the pseudo-second-order model and the corresponding rate constants were obtained. Thermodynamic aspects of the adsorption process were also investigated. [Copyright &y& Elsevier]