Search

Enteromorpha prolifera-derived Fe

The bleaching wastewater effluent from a pulp and paper mill (located in Tianjin, China) was treated with solar photo-Fenton process in a lab-scale reactor (22 cm x 15 cm thermostatic dish). The mill used wastepaper as raw material and the effluent contained 332 mgL(-1) of total organic carbon (TOC) and 1286 mg L(-1) of COD. The treatment involved a constant intensity of irradiation (0.2 kW/m(2)) with a solar simulator of 250 W xenon lamp and various conditions of pH, temperature, and initial concentrations of H(2)O(2) and Fe(II). The better treatment conditions were searched for in the ranges of initial Fe(II) concentration from 31 to 310 mgL(-1) (initial pH 3.0, 30 degrees C), initial H(2)O(2) concentration from 0.5 to 3 Dth (1 Dth=1883 mg L(-1) for TOC mineralization) (initial pH 3.0, 30 degrees C), initial pH from 2.0 to 6.0 (1 and 2 Dth, 10:1 of H(2)O(2)/Fe(II), 30 degrees C), and temperature from 30 to 50 degrees C (1 Dth, 10:1 of H(2)O(2)/Fe(II), initial pH 2.8). TOC removal generally showed the initial fast increase stage within the first sampling time of 15 min, followed by the gradual increase stage in the remaining sampling time of 180 min experimental time course. The highest percentage of TOC removal in the first stage was about 60% when the initial pH was either 2.8 (H(2)O(2)=1 Dth, ratio=10:1, temperature=30-50 degrees C) or 3.5 (H(2)O(2)=2 Dth, ratio=10:1, temperature=30 degrees C). Also under the latter condition, the value reached 82% at 120 min and was projected to reach 94% at 180 min. According to the positive effect of temperature increase on TOC removal observed in this experiment, further increase above these maximum values is possible if the temperature of the above condition were increased from 30 to 40 degrees C or 50 degrees C. Furthermore, under most of the treatment conditions, the TOC removal reached or was projected to reach over 60% toward the end of the experiments. The result indicated that the solar photo-Fenton process has a potential to effectively remove TOC from the wastepaper pulp effluent on a large scale.

The electrochemical oxidation of phenol in synthetic wastewater and paper mill wastewater catalyzed by metal ion supported on cation exchange resin in suspended bed electrolytic reactor with graphite electrode has been investigated. The catalyst was characterized by SEM and XPS spectra and the effects of pH, the different metal ion and NaCl on the efficiency of the electrochemical oxidation phenol process were also studied. It was found that the catalyst containing Fe3+ had the highest electrochemical catalytic activity for the electrochemical oxidation of phenol. When the initial concentration of phenol was 200 ppm, up to 90% chemical oxygen demand (COD) removal was obtained in 10 min. When the catalyst containing Fe3+ was used to the paper mill wastewater, it still showed high efficiency. The COD removal could get to 75% in 60 min.

Advanced oxidation processes including UV, UV/H(2)O(2), Fenton reaction (Fe(II)/H(2)O(2)) and photo-Fenton process (Fe(II)/H(2)O(2)/UV) for the treatment of paper mill wastewater will be investigated. A comparison among these techniques is undertaken with respect to the decrease of chemical oxygen demand (COD) and total suspended solids (TSS) and the evolution of chloride ions. Optimum operating conditions for each process under study revealed the effect of the initial amounts of Fe(II) and hydrogen peroxide. Of the tested processes, photo-Fenton process was found to be the fastest one with respect to COD and TSS reduction of the wastewater within 45 min reaction time under low amounts of Fe(II) and hydrogen peroxide of 0.5 and 1.5mg/L, respectively, and amounted to 79.6% and 96.6% COD and TSS removal. The initial biodegradability of the organic matter present in the effluent, estimated as the BOD(5)/COD, was low 0.21. When the effluent was submitted to the different types of AOPs used in this study, the biodegradability increases significantly. Within 45 min of reaction time, the photo-Fenton process appears as the most efficient process in the enhancement of the biodegradability of the organic matter in the effluent and the BOD(5)/COD ratio increased from 0.21 to 0.7.

Pulp mill effluent containing toxic chemicals was treated by different advanced oxidation processes (AOPs) consisting of treatments by hydrogen peroxide, Fenton's reagent (H2O2/Fe2+), UV, UV/H2O2, photo-Fenton (UV/H2O2/Fe2+), ozonation and peroxone (ozone/H2O2) in laboratory-scale reactors for color, total organic carbon (TOC) and adsorbable organic halogens (AOX) removals from the pulp mill effluent. Effects of some operating parameters such as the initial pH, oxidant and catalyst concentrations on TOC, color, AOX removals were investigated. Almost every method used resulted in some degree of color removal from the pulp mill effluent. However, the Fenton's reagent utilizing H2O2/Fe2+ resulted in the highest color, TOC and AOX removals under acidic conditions when compared with the other AOPs tested. Approximately, 88% TOC, 85% color and 89% AOX removals were obtained by the Fenton's reagent at pH 5 within 30 min. Photo-Fenton process yielded comparable TOC (85%), color (82%) and AOX (93%) removals within 5 min due to oxidations by UV light in addition to the Fenton's reagent. Fast oxidation reactions by the photo-Fenton treatment makes this approach more favorable as compared to the others used. (c) 2006 Elsevier B.V. All rights reserved.