Search

Magnetic multi-walled carbon nanotubes (MWCNTs) were prepared to support Pd/Fe nanoparticles, inhibit the aggregation and passivation, and achieve magnetic separation to avoid the environmental risk of nanoparticles. Rapid adsorption of initial contaminant, steady dechlorination, and gradual desorption of final product was observed. The micromorphology, chemical structure, and components of the nanohybrids were comprehensively characterized by a series of analysis technologies, such as EDX, XRD, SEM, TEM, and XPS. The interactions between the nanohybrids compositions were discussed according to the characterization and experimental data. The whole insight of 2,4-dichlorophenol (2,4-DCP) adsorption- dechlorination-desorption was studied in detail, including the pathways, influence factors, dechlorination kinetics and selectivity. Weak acidity (pH = 5.0 and 6.5) favored the 2,4-DCP removal. Satisfactory reactivity of the Pd/Fe-Fe 3 O 4 @MWCNTs nanohybrids was observed in five consecutive runs, and 99.2%, 89.6%, 92.1%, 99.8%, and 99.9% of 2,4-DCP was removed, respectively. Most of the final product (phenol) was steadily desorbed to the liquid phase, resulted in the re-exposure of active sites on the nanohybrids and maintained a longer activity. [ABSTRACT FROM AUTHOR]

Abstract: Nanoscale Pd/Fe particles were combined with multi-walled carbon nanotubes (MWNTs) to prepare supported particles (MWNT-stabilized Pd/Fe), which were used to remove 2,4-dichlorophenol (2,4-DCP). The adsorption capacity of MWNTs was found to be increased with the increasing amount of chlorine atoms, and the removal rates of phenol (P), 2-chlorophenol (2-CP), 4-chlorophenol (4-CP) and 2,4-DCP reached 19.7%, 60.5%, 72.0% and 95.1% respectively, in 1min by MWNTs due to π–π interaction. The adsorption kinetics and adsorption isotherm were also discussed. MWNTs as a supporter, was effective for avoiding the agglomeration of nZVI. Furthermore, the speedy removal efficiency of the initial substances (2,4-DCP) reached about 50% in 1min, and over the time continued to rise to 100%, remaining low concentrations (<1mgL−1) of the intermediate substances (o-CP, p-CP), and gradual release of the final substance (P) from MWNT-stabilized Pd/Fe composites during the whole process, proposed a novel method for in situ remediation technology. [Copyright &y& Elsevier]

Abstract: This paper describes the synthesis of sodium carboxymethyl cellulose (CMC)-stabilized Pd/Fe nanoparticles and their applications to the dechlorination of 2,4-dichlorophenoxyacetic acid (2,4-D) under controlled laboratorial conditions. For this purpose batch mode experiments were conducted to understand the effects of CMC on the surface characteristics of Pd/Fe nanoparticles, optimum removal of 2,4-D and other surface interactions mechanism. Our experimental results demonstrated considerable enhancements in particle stability and chemical reactivity with the addition of CMC to Pd/Fe nanoparticles. Transmission electron microscopy (TEM) analysis indicated that CMC-stabilized Pd/Fe nanoparticles were well dispersed, and nanoparticles remained in suspension for days compared to non-stabilized Pd/Fe nanoparticles precipitated within minutes. The isoelectric point (IEP) of the nanoparticles shifted from pH 6.5 to 2.5, suggesting that CMC-stabilized Pd/Fe nanoparticles were negatively charged over a wider pH range. Our batch experiments demonstrated that CMC-stabilized Pd/Fe nanoparticles (0.6gFeL−1) were able to remove much higher levels of 2,4-D with only one intermediate 2-chlorophenoxyacetic acid (2-CPA) and the final organic product phenoxyacetic acid (PA), than non-stabilized Pd/Fe nanoparticles or microsized Pd/Fe particles. The removal percentage of 2,4-D increased from 10% to nearly 100% as the reaction pH decreased from 11.5 to 2.5. The optimal CMC/Fe mass ratio for the dechlorination of 2,4-D was determined to be 5/1, and the removal of 2,4-D was evidently hindered by an overdose of CMC. [Copyright &y& Elsevier]