Search

Al-based particle-reinforced composites have become the focus research around the world due to their unique quality, economic and performance advantages. Powder metallurgy method has the advantages of flexible selection of reinforced particles, accurate and controllable content, and strong designability, which is one of the commonly used methods for preparing particle reinforced Al matrix composites and is favored by many scholars. The present paper firstly gives a brief introduction to the development of Al matrix composites. Secondly, the densification molding technology and sintering process in powder metallurgy process are summarized. Subsequently, the composition design, such as reinforcement type, content, particle size, distribution, etc., interface wettability and its control, the relationship between microstructure characteristics and mechanical properties, and the strengthening mechanism were mainly discussed. Finally, it analyses the problems and challenges faced by powder metallurgical particle-reinforced Al matrix composites and looks forward to their development. [ABSTRACT FROM AUTHOR]

In this paper, high purity Ta-Ru alloy was prepared by powder metallurgy hot press sintering. Tantalum ruthenium powder with high purity was mixed in different composition ratio on planetary ball mill, and hot pressed for 3 h at 1 700 ℃ and 20 MPa in vacuum hot pressing sintering furnace. The effect of different Ru contents on the phase composition, microstructure and mechanical properties of Ta-Ru alloys were investigated by XRD, SEM, EDS, tensile strength test and other analytical methods. The results show that, with increasing Ru content, several intermetallic compounds such as TaRu, Ta3Ru, and TaRu4 were successively formed in the alloy. The density and tensile strength of the alloy increased gradually, and the microhardness increased first and then decreased. The fracture mode changed from cleavage fracture to intergranular fracture and ductile fracture. [ABSTRACT FROM AUTHOR]