Search

Factors influencing effectiveness of automated comparisons, test‐fired bullets, and cartridge cases from 0.38 Special revolvers were logged into the Evofinder® Ballistic ID System. Tests were performed as follows: First test correlated test‐fires of the same type, second test compared different types of ammunition components, third test replicated the second test in a larger database, and fourth test replicated the third test with students having no previous firearm identification experience. System effectiveness with projectiles in the first test was 0.89. With cartridge cases, effectiveness was 0.79 with combined results, but analysis of separate results by breech face and firing pin revealed low effectiveness by breech face (0.40). In the second, third, and fourth tests, effectiveness with projectiles were 0.61, 0.51, and 0.44. In addition, these tests had effectiveness with cartridge cases equivalent to 0.55, 0.43, and 0.44. Results are useful to establish routine protocols, system improvements, or comparative assessment of other electronic systems. [ABSTRACT FROM AUTHOR]

A review of the literature concerning the fate and behavior of gunshot residue ( GSR) is presented. A number of concomitant parameters including firearm and ammunition type, plume and GSR material characteristics, travel distances, chemical composition and GSR morphology are critically discussed in relation to their effects on the distribution and deposition, transfer and persistence processes of GSR. The underlying mechanisms associated with such processes are also considered. Knowledge of these processes on GSR materials could provide valuable information concerning scene preservation and subsequent forensic sampling. The number of GSR particles deposited can vary significantly with each firearm discharge, highlighting the potential to produce distinctive data in each individual case. With the continual development and compositional changes of new ammunition types, further evaluation of the effect these processes may have on GSR evidence and their possible influence on the interpretation of the analytical results should be given due consideration. [ABSTRACT FROM AUTHOR]

In order to assess whether or not the class and individual characteristics of a firearm change over time, five different makes of Turkish self-loading pistol were tested and were each fired a large number of times. The class and individual characteristics were identified for each pistol and the first fired cartridge case was compared with the subsequent consecutive 250th fired cases for each pistol. It was found that there were slight changes in some of the individual and class characteristics; however, this was not statistically significant and did not affect the ability of the firearms examiner to match the first fired case to the last fired case for each firearm tested. [ABSTRACT FROM AUTHOR]

This study describes the modification methods of blank cartridge firing pistols in Turkey. We have examined cases submitted to the Aydın Regional Criminal Laboratory of Turkey in 2006. In total, 95 modified pistols and 300 modified cartridges were examined. The blank cartridge firing pistols are guns which look similar to “real” pistols, however, there are blockages in their barrel in order to prevent the discharge of a bullet. However, as a result of simple modifications, these pistols can be easily converted into “real” firearms. Studied modification methods are removing the obstruction from the barrel, removing the partial obstruction from the barrel, sleeving a smaller diameter tube into the original barrel, using a replacement barrel, and rifling the original barrel. Special cartridges for these modified pistols are also produced. These modified pistols and cartridges were evaluated in respect of the converting methods. [ABSTRACT FROM AUTHOR]

This study evaluates the abilities of the Integrated Ballistics Identification System (IBIS) and BulletTRAX-3D electronic imaging systems to identify bullets fired by the same weapon in a large database of images. Ten consecutively rifled handgun barrels were test fired to obtain reference sample and known match sample pairs for upload onto both bullet acquisition systems. Both copper-jacketed and lead bullets were uploaded, to account for variations in the manner in which markings are reproduced on the different metal compositions. Ranked correlation lists were examined and evaluated. For copper-jacketed bullet correlations, both IBIS and BulletTRAX-3D identified all reference samples to their known matches within the top 10 positions. For lead bullets, BulletTRAX-3D identified all reference samples to their known match in the top 10 positions while IBIS identified only 30%. For inter composition comparisons, BulletTRAX-3D was more successful than IBIS, identifying 100% of reference samples to their known match in the top 20 for copper-jacketed to lead comparisons and 90% for lead to copper-jacketed comparisons. These results suggest that BulletTRAX-3D is more effective than IBIS in the analysis of a wider range of bullet types and it was also found to produce images of superior quality. [ABSTRACT FROM AUTHOR]

The Tucson Police Department, Tucson, AZ, has begun using the Polyshok Impact Reactive Projectile (IRP), a new type of shotgun ammunition that includes a lead bead core that travels within single, plastic-encased projectile. On impact, the core is released to distribute over a small area, thereby disintegrating on impact to reduce the likelihood of exit or collateral damage on missed shots. After a brief review of shotgun slug ballistics and wound characteristics and a discussion of the mechanism of the Polyshok IRP, we report the first death in the United States from this ammunition. Findings included a single entrance wound with plastic ammunition components and small lead particles recovered from the body, the combination of which normally would suggest a close-range shooting with birdshot. However, the characteristics of this ammunition create different patterns than are found with slugs or shot, so that a medical examiner unfamiliar with the Polyshok IRP could draw inaccurate conclusions about ammunition and range of fire. Because the single projectile fired from this ammunition is composed of both plastic and lead, plastic components are likely to be found within the wound at any range of fire, unlike traditional shot or slug ammunition. Also, the small size of lead particles found spread through the wound cavity would ordinarily suggest a small-size shot, whereas the external appearance of the wound (a single entrance with no dispersion of shot) and the pattern of tissue destruction are more consistent with the patterns of injury associated with shotgun slugs. [ABSTRACT FROM AUTHOR]

Describes the use of 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine (PDT) as a complexing agent to determine traces of iron which are transferred to the hand upon holding a firearm. Chemical and physical processes involved in the application of PDT to human skin; Suggestion that the stain intensity of the PDT correlates with the amount of iron extracted from the hand and the amounts of iron transferred to the hand depend on the palmar moisture levels.

A wide variety of handmade firearms have been involved in criminal cases in the city of Trabzon, Turkey. Although they are often very similar to commercially manufactured firearms in terms of design, loading and locking mechanisms, and cocking and firing arrangements, these guns are constructed from cheap materials and are not safe for firing. Handmade firearms manufactured in the Black Sea region of Turkey, particularly in the city of Trabzon, are similar to pistols manufactured by Browning, Luger, Star, Smith and Wesson, Berretta, and MAB. A total of 201 handmade guns referred to the Criminal Police Laboratories for examination from 2003 to 2005 were evaluated with respect to type, number of barrels, size and caliber, rifling, design, mechanism, operability, legality, and similarity to commercial models. We found that most of these handmade guns resembled commercial models in several aspects. [ABSTRACT FROM AUTHOR]

This study describes the frequency and type of pen guns in Turkey by examining the cases sent to the Council of Forensic Medicine of Turkey between 2000 and 2004. In total, 32 cases and 61 pen guns were examined. These guns were evaluated in respect of the type of the gun, size and caliber, rifling, design, mechanism, fitness for use, legality, and geographical distribution. Fifty-nine percent of the guns were 22-gauge. Most commonly, they originate from South Eastern Anatolia. It is suggested that the guns are handmade. [ABSTRACT FROM AUTHOR]

Historically, in crimes involving heavy caliber rifles, only conventional factory-made versions have been used. However, in recent years the number of homemade long-barreled rifles is increasing. The characteristics of two such firearms that have been submitted to the Turkish Criminal Laboratory are discussed here. When the main parts of the guns were examined in detail, it was noted that nearly all of the parts had been made carelessly, with several structural defects visible. It was determined that the homemade heavy caliber rifles were unfit for efficient use and it was possible that they could have seriously harmed the shooter had they been fired. The development of these kinds of gun and the possibility of their use spreading throughout the country in terrorist attacks could cause a serious threat to national security. [ABSTRACT FROM AUTHOR]

This study describes the frequency of mole guns in Turkey by examining the cases sent to the Council of Forensic Medicine of Turkey between 2003 and 2005. In total, 11 mole guns were examined. Mole guns are manufactured to be used as a trap against detrimental animals. Although they are not meant to be used as a firearm, they are able to cause death. Mole guns appearing in regular casework were evaluated in terms of type of the gun, number of barrels, size and caliber, rifling, design, mechanism, fitness for use, legality, and geographical distribution. Ninty-one percent of the guns were 12 gauge. Most commonly they originate from Inner Anatolia. Mole guns are typically handmade. Some examples of injuries and deaths caused by mole guns are also offered. [ABSTRACT FROM AUTHOR]