Search

In examining deaths resulting from gunshot wounds, it is important to describe the wound pathway created by the projectile. Forensic pathologists must identify all entrance and exit wounds and account for all projectiles. Occasionally, confusion arises as to whether a skin defect represents an entrance wound or not, an exit wound, or some other type of wound. Herein, we propose the descriptor "bullet track skin defect" as a formal description for a superficial skin defect created along the pathway of a projectile within the body. Specifically, we define the "bullet track skin defect" as a partial‐ or full‐thickness skin defect produced by a projectile traveling beneath the skin in a relatively tangential fashion as part of a wound pathway within the body. It is somewhat analogous to a traditional graze or superficial tangential wound, wherein the projectile traveling outside the body strikes the skin tangentially from above, without entering the body. However, the projectile is already traveling within the body with the bullet track skin defect, disrupting the skin tangentially from below rather than from above, without exiting the body. Although these defects are not a common presentation of gunshot wounds, they are certainly not rare. With this case series, we suggest that such defects may be referred to as "bullet track skin defects." Alternative language that can substitute for "bullet track skin defects" includes "bullet track skin wounds" or "bullet track cutaneous defects." [ABSTRACT FROM AUTHOR]

Soot is deposited from 20–30 cm from the muzzle of most handguns and arranged concentrically around the entry wound. We examined a case of a self‐inflicted gunshot wound from a 9‐mm pistol that left an unusual pattern of soot deposition consisting of two circular 3‐mm deposits of soot located 2 cm from the entry wound. Examination of the weapon and test‐firing it against a cloth reproduced the soot deposits, which were caused by two ports on the top of the barrel. Examination of the weapon and comparing the barrel with the entry wound and surrounding skin may provide important information about the type of weapon, the muzzle‐to‐target distance, and atypical soot deposits. [ABSTRACT FROM AUTHOR]

Assessment of wound characteristics and the identification of various constituents of firearm discharge at autopsy play a key role in the determination of range of fire. In relation to wounds caused by shotguns, identification of the wad within the wound track, or of injury caused by the wad, is typically thought to suggest a fairly close range of fire. We present a case of a fatality due to a shotgun slug wound where the presence of the wad within the decedent's body was proposed by defense at criminal trial to favor accidental close range discharge during a struggle for the weapon—as opposed to the prosecution's contention of intentional firing of the weapon from a greater range and through an intermediate target. We undertook test firing of a shotgun of similar design to that which was fired during the interaction (a 12‐gauge pump‐action shotgun) using shotshells consistent with the slug that was recovered from the body (Winchester Super X brand), which demonstrated that the non‐attached fiber wad present in this shotshell design can accompany the slug over distances of at least up to 22 feet (6.7 m) and even after transit through intermediate targets such as a vehicle headrest. These novel data provide assistance with estimation of range of fire in instances of injuries caused by shotgun slugs. [ABSTRACT FROM AUTHOR]

A "plated bullet" has a thin layer of electroplated metal covering the lead core of the projectile. In certain situations, this thin layer of electroplated metal can fracture upon discharge of the firearm. When such fracturing occurs, vaporous lead can escape through the fracture lines of the spinning projectile, resulting in a spiral‐shaped deposition of dark residue surrounding a central bullet defect. The spiral‐shaped pattern is referred to as "comet‐tailing," or the "vortex effect." In this report, three homicide cases with associated comet‐tailing are presented. Police, death investigators, and forensic pathologists should be aware of this unique finding. [ABSTRACT FROM AUTHOR]

Black powder weapons are rarely used in countries where access to firearms is easy. Poland has a fairly restrictive law regarding possession of firearms but under the Weapons and Munitions Act of May 21, 1999, as further amended, the possession of black powder weapons using separate loaded ammunition and manufactured before 1885, or replicas thereof, is legal without a permit. When the amendment was introduced, forensic pathologists anticipated a rush of cases involving such weapons, mainly suicides, but also accidents and homicides, but in our own practice in Lodz over the past 10 years (2010–2019) we have encountered only 7 such cases. Although the number is not particularly high, it does nevertheless account for nearly one‐fifth of all gunshot deaths in the area. The aim of this paper is to present a series of deaths involving the use of black powder handguns. In analyzed cases, the victims were mostly men, they were sober, and their manner of death was suicide. As far as age was concerned, no regularity was found. All black powder handgun shots were characteristic enough in comparison with those from conventional firearms that they could be identified easily—the entrance wounds were larger than usual, there was a lot of gunpowder around them and in the wound canal, the bone fractures were extensive. Analysis of the literature and of our own material indicates that easy availability is not the only factor affecting the choice of a weapon; ease of use and reliability are also important. [ABSTRACT FROM AUTHOR]

With three‐dimensional (3D) laser scanning technology and software packages, the practice of documenting and measuring bullet trajectories has benefited from greater accuracy and reproducibility. This study investigated the accuracy and reproducibility of the bullet trajectory tools in the software package, FARO Zone 3D (FZ3D). Twelve participants were provided laser scanner data for 21 bullet trajectories on drywall panels with impact angles between 25° and 90°. When the impact plane was manually aligned by the operator, 75% of the absolute errors were within 0.91° and 0.98° for the azimuth and vertical angles, respectively. The vertical angle improved to 0.47° when impact plane alignment was taken with respect to gravity (no operator influence). Thus, manual alignment is shown to be subject to greater error than alignment with gravity. However, this study shows that the accuracy and reproducibility of the FZ3D bullet trajectory tools to be comparable with previous research studies. [ABSTRACT FROM AUTHOR]

The susceptibility for recreational shooters to transfer gunshot residue (GSR) to both the interior and exterior of a vehicle is investigated. A comprehensive sampling protocol was used to assess the most likely areas of GSR transfer from recreational shooter contact, such as the steering wheel and the area, the firearms were stored (the trunk). Up to 315 characteristic GSR, particles were found in several locations throughout the interior of a vehicle. As many as 876 characteristic particles were found throughout a single vehicle. The data indicate that vehicles frequently occupied by firearms users are a potential source for inadvertent transfer of GSR to persons unrelated to firearm activity. In criminal cases where vehicles have been used, such transfer processes for GSR need to be considered within the context of any case interpretation. The implications for subsequent contamination and transfer processes from such vehicles require further investigation. [ABSTRACT FROM AUTHOR]

In order to assess the efficacy of vacuum metal deposition (VMD) as a technique to develop fingermarks on ballistic metallic surfaces, a preliminary study using six donors (three male & three female) was conducted. Using a sequential metal deposition process, two metal combinations were studied—gold/zinc and silver/zinc. Results indicate the potential of this technique, by developing identifiable fingermarks on brass metal disks aged from a few days up to more than a month old. As the development of fingermarks on fired (brass) cartridge cases is an area of interest, a further study was conducted where a total of 20 fingermarks were deposited on cases. After firing, second level fingermark characteristics were successfully observed on cartridge cases highlighting its potential as a fingermark enhancement method for ballistic brass materials. Further work is required to fully evaluate the VMD process and its reliability as a fingermark enhancing method on ballistic surfaces. [ABSTRACT FROM AUTHOR]

Studies on ballistic trauma to the ribs and thorax, cranium, and long bones demonstrate the potential of obtaining a bullet caliber from an entrance wound. In order to validate prior research on caliber estimation in bone tissue and assess the viability of bullet type determination based on the macroscopic evidence at the entrance wound, thirty fleshed pork (Sus scrofa) shoulders (humeri) were shot with either lead or copper jacketed bullets in one of three calibers; 0.22, 9 mm, or 0.38. Overall, our findings are consistent with previous research indicating that calibers can be grouped into "small" and "large" categories. Bullet type, lead or copper jacket, can be ascertained based on cortical flaking and the analysis of materials deposited around the entry wound. The addition of this evidence holds value in cases where no firearm or ballistic evidence is recovered from a crime scene. [ABSTRACT FROM AUTHOR]

A bystander claimed to have been shot by a police officer, and CT scans were used to match qualitative and quantitative aspects of the unremoved bullet with police issued 9 mm Luger ammunition. CT scan methodology proved a valid approach for the measurement of bullets based on calculated measurement capability and correlation with "gold standard" physical measurement by vernier caliper. Measurements regarding length and base diameter, as well as length/diameter ratio, were insufficient to unambiguously identify a specific caliber, or a bullet of specific mass within a caliber class. It was, however, possible to exclude a bullet of specific design and mass with well‐characterized precision and accuracy values under selected CT scan conditions. A 9 mm Luger bullet (115 gr FMJ RN) was excluded from involvement in a shooting based on qualitative bullet shape combined with length, base, and ratio measurements of the bullet in‐situ for the victim. [ABSTRACT FROM AUTHOR]

Factors influencing effectiveness of automated comparisons, test‐fired bullets, and cartridge cases from 0.38 Special revolvers were logged into the Evofinder® Ballistic ID System. Tests were performed as follows: First test correlated test‐fires of the same type, second test compared different types of ammunition components, third test replicated the second test in a larger database, and fourth test replicated the third test with students having no previous firearm identification experience. System effectiveness with projectiles in the first test was 0.89. With cartridge cases, effectiveness was 0.79 with combined results, but analysis of separate results by breech face and firing pin revealed low effectiveness by breech face (0.40). In the second, third, and fourth tests, effectiveness with projectiles were 0.61, 0.51, and 0.44. In addition, these tests had effectiveness with cartridge cases equivalent to 0.55, 0.43, and 0.44. Results are useful to establish routine protocols, system improvements, or comparative assessment of other electronic systems. [ABSTRACT FROM AUTHOR]

Abstract: Three‐dimensional (3D) technologies contribute greatly to bullet trajectory analysis and shooting reconstruction. There are few papers which address the errors associated with utilizing laser scanning for bullet trajectory documentation. This study examined the accuracy and precision of laser scanning for documenting trajectory rods in drywall for angles between 25° and 90°. The inherent error range of 0.02°–2.10° was noted while the overall error for laser scanning ranged between 0.04° and 1.98°. The inter‐ and intraobserver errors for trajectory rod placement and virtual trajectory marking showed that the range of variation for rod placement was between 0.1°–1° in drywall and 0.05°–0.5° in plywood. Virtual trajectory marking accuracy tests showed that 75% of data values were below 0.91° and 0.61° on azimuth and vertical angles, respectively. In conclusion, many contributing factors affect bullet trajectory analysis, and the use of 3D technologies can aid in reduction of errors associated with documentation. [ABSTRACT FROM AUTHOR]

Abstract: Ballistic gelatin as simulant of the human body and organs is a support in forensics. After having obtained very good results for a new gelatin‐based composite in terms of physicochemical and rheological properties, this study focused on this material's mechanical behavior during stabbing and shooting versus bovine and porcine organs and standard ballistic gelatin. The hybrid gelatin has a predominantly elastic behavior at 23°C, whereas the elastic modulus becomes practically constant in the 10–0.1 Hz frequency range. In terms of stabbing behavior, the small variations obtained between porcine organs and surrogate are below 5%, the perforation indicating a good similarity. From the ballistic test results using 10 × 28T rubber balls, it has been seen that the hybrid ballistic gelatin conducts to more reliable and reproducible values of perforation/penetration versus standard gelatin, making from it a real candidate for use in forensic tests. [ABSTRACT FROM AUTHOR]

This ballistics study examines whether saline breast implants can decrease tissue penetration in firearm injuries. We hypothesize that the fluid column within a saline breast implant can alter bullet velocity and/or bullet pattern of mushrooming. The two experimental groups included saline implants with 7.4 cm projection and a no implant group. The experimental design allowed the bullet to pass-through an implant and into ballistics gel (n = 10) or into ballistics gel without passage through an implant (n = 11). Shots that passed through an implant had 20.6% decreased penetration distance when compared to shots that did not pass-through an implant; this difference was statistically significant (31.9 cm vs. 40.2 cm, p < 0.001). Implant group bullets mushroomed prior to gel entry, but the no implant group mushroomed within the gel. Bullet passage through a saline breast implant results in direct bullet velocity reduction and earlier bullet mushrooming; this causes significantly decreased ballistics gel penetration. [ABSTRACT FROM AUTHOR]

A review of the literature concerning the fate and behavior of gunshot residue ( GSR) is presented. A number of concomitant parameters including firearm and ammunition type, plume and GSR material characteristics, travel distances, chemical composition and GSR morphology are critically discussed in relation to their effects on the distribution and deposition, transfer and persistence processes of GSR. The underlying mechanisms associated with such processes are also considered. Knowledge of these processes on GSR materials could provide valuable information concerning scene preservation and subsequent forensic sampling. The number of GSR particles deposited can vary significantly with each firearm discharge, highlighting the potential to produce distinctive data in each individual case. With the continual development and compositional changes of new ammunition types, further evaluation of the effect these processes may have on GSR evidence and their possible influence on the interpretation of the analytical results should be given due consideration. [ABSTRACT FROM AUTHOR]

Damage produced by high-speed projectiles on organic tissue will depend on the physical properties of the tissues. Conditioning organic tissue samples to human core body temperature (37°C) prior to conducting ballistic experiments enables their behavior to closely mimic that of living tissues. To minimize autolytic changes after death, the tissues are refrigerated soon after their removal from the body and re-heated to 37°C prior to testing. This research investigates whether heating 50-mm-cube samples of porcine liver, kidney, and heart to 37°C for varying durations (maximum 7 h) can affect the penetration response of a high-speed, steel sphere projectile. Longer conditioning times for heart and liver resulted in a slight loss of velocity/energy of the projectile, but the reverse effect occurred for the kidney. Possible reasons for these trends include autolytic changes causing softening (heart and liver) and dehydration causing an increase in density (kidney). [ABSTRACT FROM AUTHOR]

Ballistic imaging systems can help solve crimes by comparing images of cartridge cases, which are recovered from a crime scene or test-fired from a gun, to a database of images obtained from past crime scenes. Many U.S. municipalities lack the resources to process all of their cartridge cases. Using data from Stockton, CA, we analyze two problems: how to allocate limited capacity to maximize the number of cartridge cases that generate at least one hit, and how to prioritize the cartridge cases that are processed to maximize the usefulness (i.e., obtained before the corresponding criminal case is closed) of hits. The number of hits can be significantly increased by prioritizing crime scene evidence over test-fires, and by ranking calibers by their hit probability and processing only the higher ranking calibers. We also estimate that last-come first-served increases the proportion of hits that are useful by only 0.05 relative to first-come first-served. [ABSTRACT FROM AUTHOR]

Projectile components that are traditionally radiolucent can be of considerable importance in determination of weapon type and caliber, but they are often missed on evaluation of postmortem radiographs. We hypothesized that these components would be significantly better visualized by evaluation of computed tomography (CT) scans compared to the practice standard of radiography alone. In this project, potentially radiolucent projectile components were both pulled apart and fired, and the radiolucent components were recovered. These components were embedded in blocks of ballistics gelatin and were imaged using both radiography and CT. The scans were evaluated by three blinded, board‐certified radiologists for the presence/absence of projectile components and true‐negative regions in each block. If a radiologist indicated visualization of a projectile component, they were further requested to describe their observation. It was found that traditionally radiolucent projectile components are not significantly more often identified on CT scans than radiography (p < 0.05). [ABSTRACT FROM AUTHOR]

Automated firearms identification ( AFI) systems contribute to shedding light on criminal events by comparison between different pieces of evidence on cartridge cases and bullets and by matching similar ones that were fired from the same firearm. Ballistic evidence can be rapidly analyzed and classified by means of an automatic image analysis and identification system. In addition, it can be used to narrow the range of possible matching evidence. In this study conducted on the cartridges ejected from the examined pistol, three imaging areas, namely the firing pin impression, capsule traces, and the intersection of these traces, were compared automatically using the image analysis and identification system through the correlation ranking method to determine the numeric values that indicate the significance of the similarities. These numerical features that signify the similarities and differences between pistol makes and models can be used in groupings to make a distinction between makes and models of pistols. [ABSTRACT FROM AUTHOR]

The field of forensic injury biomechanics is an emerging field. Biomechanically validated tools may assist interdisciplinary teams of investigators in assessing mechanisms of blunt head trauma resulting in skull fractures. The objective of this study is to assess the biofidelity of spherical, frangible skull-brain ( SB) surrogates. Blunt impacts were conducted at 20 m/s, using an instrumented 103 g rigid impactor, to the temporo-parietal region of four defleshed cephalic postmortem human subjects ( PMHS). Force-deformation response, fracture tolerance, and fracture patterns were recorded for comparison to spherical skull-brain surrogates. Three brain substitutes were assessed: 10% gelatin, lead shot with Styrofoam and water. Force-deformation response of the skull-brain surrogates was similar to defleshed PMHS up to the point of fracture; however, none of the surrogates fractured at tolerance levels comparable to the PMHS. Fracture patterns of the skull-brain surrogates were linear and radiating, while PMHS fractures were all depressed, comminuted. [ABSTRACT FROM AUTHOR]

In case of gunshot deaths, atypical wounds can make the distinction between entrance and exit wounds harder. They may be due either to anatomical reasons or to diverse cogent ballistic arguments. The reported case pertains to a fatal hunting accident involving an expanded conical point bullet against the neck with both atypical entrance and exit wounds. Ballistic analyses including test firings allowed a better understanding of the external and internal findings. Upon premature impact with an intermediary target, the bullet experienced expansion in the formation of sharp brass petals responsible for a star-shaped entry wound. The trajectory of the deformed high energy projectile through the victim's body was then deviated by the cervical column, causing it to be tangential to the skin when exiting the body. The description of such atypical cases may benefit other experts and may assist in their investigation into similar cases. [ABSTRACT FROM AUTHOR]

There are several studies suggesting models for firing distance estimation due to pellet dispersion, but few of them consider the degree of choke of a shotgun. The purpose of this research is to suggest some models for estimation of the firing distance for choked and cylinder bore shotguns. Twelve gauge with full chokes, and 12 and 16 gauge with cylinder bore shotguns were fired with #2 and #5 shots from 75, 100, 300, 500, and 1000 cm distances. Statistically significant pellet dispersion values were found for each shotgun by using #2 and #5 shots for different firing distances. All the data obtained were analyzed with linear regression and four models were constituted. Investigators should use special formulae for each shotgun, degree of choke, and pellet type while determining the firing distance. Therefore, more experimental and comparative studies should be designed for each type. [ABSTRACT FROM AUTHOR]

A comprehensive review of the scientific literature on gunshot residue (GSR) is presented. Aspects of both inorganic and organic GSR are discussed, from formation and distribution, to sample collection, preparation, and analysis using a variety of techniques. The interpretation of GSR results is also considered including issues surrounding the contamination, distribution, and transfer of GSR. Potential problems with ulterior sources of GSR like particles have been reported in the literature. For example, particles from environmental and occupational sources have been highlighted as exhibiting similar chemical and morphological characteristics to GSR. These findings are put into context with regard to interpreting samples. A move toward a “case by case” approach is argued to be more preferable to a “formal” classification system where possible. The analysis of both inorganic and organic compositions of residue samples as well as morphological considerations is considered to be a more ideal approach to GSR analysis, whereever practicable. [ABSTRACT FROM AUTHOR]

Pork ribs with intact muscle tissue were used in an experimental attempt to identify bullet wipe on bone at distances from 1 to 6 feet with 0.45 caliber, full metal jacket ammunition. This resulted in the unexpected finding of primer-derived gunshot residue (GSR) deep within the wound tract. Of significance is the fact that the GSR was deposited on the bone, under the periosteum, after the bullet passed through a Ziploc® bag and c. 1 inch of muscle tissue. It is also important to note that the GSR persisted on the bone after the periosteum was forcibly removed. The presence of primer-derived GSR on bone provides the potential to differentiate gunshot trauma from blunt trauma when the bone presents an atypical gunshot wound. In this study, the presence of gunshot primer residue at a distance of 6 feet demonstrates the potential for establishing maximum gun-to-target distance for remote shootings. [ABSTRACT FROM AUTHOR]

Home-made guns are imitations of typical firearms and usually have handgun characteristics. This article presents an unusual case of a suicide carried out by means of a fatal gunshot wound to the head using a home-made zip gun. A 49-year-old male, with a history of paranoid psychosis was found dead in the dwelling place of a family house. The investigation at the crime scene did not lead to suspicion of a gunshot wound because of the unusual nature of the firearm used. A medical examiner diagnosed an opened head injury as the primary cause of the victim’s death. The autopsy findings provided immediate grounds for further inspection of the crime scene. Subsequently, a simple zip gun, which had been overlooked during the scene investigation, was discovered. An undeformed projectile recovered from the victim’s head was consistent with the use of the home-made firearm. Following the completion of the investigations and autopsy, the death was classified as a suicide. [ABSTRACT FROM AUTHOR]

In order to assess whether or not the class and individual characteristics of a firearm change over time, five different makes of Turkish self-loading pistol were tested and were each fired a large number of times. The class and individual characteristics were identified for each pistol and the first fired cartridge case was compared with the subsequent consecutive 250th fired cases for each pistol. It was found that there were slight changes in some of the individual and class characteristics; however, this was not statistically significant and did not affect the ability of the firearms examiner to match the first fired case to the last fired case for each firearm tested. [ABSTRACT FROM AUTHOR]

The Apulian (South of Italy) territory saw the birth of a criminal organization called Sacra Corona Unita (SCU, United Holy Crown) which transformed the rules of traditional mafia organizations. This work examined 83 victims of the SCU between 1980 and 2000. The bodies were mainly of SCU members and in some cases, of police and law enforcement officers and other citizens caught in the crossfire. Some of these were discovered; thanks to the collaboration of “repented” SCU members who became police informers. The condition of the bodies varied in relation to the date and manner of killing. In some cases anthropometric research methods were necessary. In 73% of the cases, lesions of the head were the only marks left on the body. In conclusion, the existence of some social aspects connected with the symbolisms and membership rites that characterized the origin, evolution, and decline of the SCU is stressed. [ABSTRACT FROM AUTHOR]

This study describes the modification methods of blank cartridge firing pistols in Turkey. We have examined cases submitted to the Aydın Regional Criminal Laboratory of Turkey in 2006. In total, 95 modified pistols and 300 modified cartridges were examined. The blank cartridge firing pistols are guns which look similar to “real” pistols, however, there are blockages in their barrel in order to prevent the discharge of a bullet. However, as a result of simple modifications, these pistols can be easily converted into “real” firearms. Studied modification methods are removing the obstruction from the barrel, removing the partial obstruction from the barrel, sleeving a smaller diameter tube into the original barrel, using a replacement barrel, and rifling the original barrel. Special cartridges for these modified pistols are also produced. These modified pistols and cartridges were evaluated in respect of the converting methods. [ABSTRACT FROM AUTHOR]

This study evaluates the abilities of the Integrated Ballistics Identification System (IBIS) and BulletTRAX-3D electronic imaging systems to identify bullets fired by the same weapon in a large database of images. Ten consecutively rifled handgun barrels were test fired to obtain reference sample and known match sample pairs for upload onto both bullet acquisition systems. Both copper-jacketed and lead bullets were uploaded, to account for variations in the manner in which markings are reproduced on the different metal compositions. Ranked correlation lists were examined and evaluated. For copper-jacketed bullet correlations, both IBIS and BulletTRAX-3D identified all reference samples to their known matches within the top 10 positions. For lead bullets, BulletTRAX-3D identified all reference samples to their known match in the top 10 positions while IBIS identified only 30%. For inter composition comparisons, BulletTRAX-3D was more successful than IBIS, identifying 100% of reference samples to their known match in the top 20 for copper-jacketed to lead comparisons and 90% for lead to copper-jacketed comparisons. These results suggest that BulletTRAX-3D is more effective than IBIS in the analysis of a wider range of bullet types and it was also found to produce images of superior quality. [ABSTRACT FROM AUTHOR]

The Tucson Police Department, Tucson, AZ, has begun using the Polyshok Impact Reactive Projectile (IRP), a new type of shotgun ammunition that includes a lead bead core that travels within single, plastic-encased projectile. On impact, the core is released to distribute over a small area, thereby disintegrating on impact to reduce the likelihood of exit or collateral damage on missed shots. After a brief review of shotgun slug ballistics and wound characteristics and a discussion of the mechanism of the Polyshok IRP, we report the first death in the United States from this ammunition. Findings included a single entrance wound with plastic ammunition components and small lead particles recovered from the body, the combination of which normally would suggest a close-range shooting with birdshot. However, the characteristics of this ammunition create different patterns than are found with slugs or shot, so that a medical examiner unfamiliar with the Polyshok IRP could draw inaccurate conclusions about ammunition and range of fire. Because the single projectile fired from this ammunition is composed of both plastic and lead, plastic components are likely to be found within the wound at any range of fire, unlike traditional shot or slug ammunition. Also, the small size of lead particles found spread through the wound cavity would ordinarily suggest a small-size shot, whereas the external appearance of the wound (a single entrance with no dispersion of shot) and the pattern of tissue destruction are more consistent with the patterns of injury associated with shotgun slugs. [ABSTRACT FROM AUTHOR]

Presents the study of the technological innovations for less-lethal kinetic energy munitions used in law enforcement in the U.S. Examinations taken to determine energy per unit area required to penetrate various regions of the body; Used of eight unembalmed postmortem human specimens in the testing experiment; Evaluation on the conducted test results.

Describes a method for extraction and analysis of gunpowder residues on double-side adhesive coated stubs, which are used for sampling suspects or their clothing for gunshot residues. Observation of interferences in the analysis by the gas chromatography/thermal energy analyzer of the samples collected from hair; Suggestion that the method enables the analysis of propellant residues on a double-side adhesive coated stub after it was examined for primer residues by scanning electron microscopy/energy dispersive X-ray spectroscopy.

Describes the use of 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine (PDT) as a complexing agent to determine traces of iron which are transferred to the hand upon holding a firearm. Chemical and physical processes involved in the application of PDT to human skin; Suggestion that the stain intensity of the PDT correlates with the amount of iron extracted from the hand and the amounts of iron transferred to the hand depend on the palmar moisture levels.

Determines the velocity of gunshot residue particles from different sources using high speed stroboscopic photography. Suggestion that the relatively high velocity of these particles may explain the formation of stippling on skin in close proximity to a muzzle discharge; Influence of air currents on particle behavior rates of deceleration.

Examines the impact of ballistics imaging technology on the productivity of the Boston Police Department's Ballistic Unit. Value of ballistics imaging technology in law enforcement; Analysis of time series data with the use of negative binomial regression models; Results of cost-effectiveness estimates and qualitative evidence.

Reports on the development of a bullet signature measurement system based on a stylus instrument of the National Institute of Standards and Technology in the United States. Goal for the support of the National Integrated Ballistics Information Network; Set of digitized bullet signatures profiled from master bullets; Control of the tool path to qualify bullet signature differences.

A wide variety of handmade firearms have been involved in criminal cases in the city of Trabzon, Turkey. Although they are often very similar to commercially manufactured firearms in terms of design, loading and locking mechanisms, and cocking and firing arrangements, these guns are constructed from cheap materials and are not safe for firing. Handmade firearms manufactured in the Black Sea region of Turkey, particularly in the city of Trabzon, are similar to pistols manufactured by Browning, Luger, Star, Smith and Wesson, Berretta, and MAB. A total of 201 handmade guns referred to the Criminal Police Laboratories for examination from 2003 to 2005 were evaluated with respect to type, number of barrels, size and caliber, rifling, design, mechanism, operability, legality, and similarity to commercial models. We found that most of these handmade guns resembled commercial models in several aspects. [ABSTRACT FROM AUTHOR]

This study investigates the legal status of modified shotguns in Turkey by examining the cases submitted to the Aydın Regional Criminal Laboratory between January 2006 and August 2008. A total of 351 shotguns used in crimes were examined. These guns were evaluated in respect of their type, size, caliber, fitness for use, and legal classification. Eleven percent of these shotguns had been modified and it was found that 55% of the modified shotguns were classified according to law 6136 and qualified as a pistol and 45% were classified according to law 2521 and qualified as nonstandard shotguns. Within the Turkish criminal justice system, a nonstandard shotgun attracts a less stringent sentence than a pistol. It would therefore appear that this sentencing structure is considered when modifying shotguns in Turkey. This is clearly a loop-hole in the legislation that could perhaps be investigated and closed. [ABSTRACT FROM AUTHOR]

This study describes the frequency and type of pen guns in Turkey by examining the cases sent to the Council of Forensic Medicine of Turkey between 2000 and 2004. In total, 32 cases and 61 pen guns were examined. These guns were evaluated in respect of the type of the gun, size and caliber, rifling, design, mechanism, fitness for use, legality, and geographical distribution. Fifty-nine percent of the guns were 22-gauge. Most commonly, they originate from South Eastern Anatolia. It is suggested that the guns are handmade. [ABSTRACT FROM AUTHOR]

Historically, in crimes involving heavy caliber rifles, only conventional factory-made versions have been used. However, in recent years the number of homemade long-barreled rifles is increasing. The characteristics of two such firearms that have been submitted to the Turkish Criminal Laboratory are discussed here. When the main parts of the guns were examined in detail, it was noted that nearly all of the parts had been made carelessly, with several structural defects visible. It was determined that the homemade heavy caliber rifles were unfit for efficient use and it was possible that they could have seriously harmed the shooter had they been fired. The development of these kinds of gun and the possibility of their use spreading throughout the country in terrorist attacks could cause a serious threat to national security. [ABSTRACT FROM AUTHOR]

Visualization of fingerprint corrosion on spent brass cartridge cases by the application of a high electrical potential and conducting carbon powder is becoming an accepted method of fingerprint enhancement. However, to date, no examination has been made of any effect this technique has on ballistic identification. To resolve this, images of the breech face and firing pin marks were captured on six plated nickel and six brass primer cup spent cartridge cases. Three nickel and three brass cases were then subjected to the application of a potential of +2500 V for a period of 1 min. The remaining cases were additionally subjected to the application of carbon powder. These latter cases were then washed to remove all traces of powder. Each case was recaptured with the same ballistic identification apparatus and imaging procedure. None of the twelve cases showed any visual difference after the application of the potential or conducting powder. [ABSTRACT FROM AUTHOR]

This study describes the frequency of mole guns in Turkey by examining the cases sent to the Council of Forensic Medicine of Turkey between 2003 and 2005. In total, 11 mole guns were examined. Mole guns are manufactured to be used as a trap against detrimental animals. Although they are not meant to be used as a firearm, they are able to cause death. Mole guns appearing in regular casework were evaluated in terms of type of the gun, number of barrels, size and caliber, rifling, design, mechanism, fitness for use, legality, and geographical distribution. Ninty-one percent of the guns were 12 gauge. Most commonly they originate from Inner Anatolia. Mole guns are typically handmade. Some examples of injuries and deaths caused by mole guns are also offered. [ABSTRACT FROM AUTHOR]