Search

Bioactive components of fruit and vegetables play an important role in scavenging free radicals and protect the body from degenerative diseases. A kinetic study was conducted to quantify the losses occurring in bioactive components, antioxidant activity and changes in colour and firmness of four commonly used vegetables (beetroot, green pea, eggplant and green pepper) during heat treatment (70-90 °C). The study revealed that logistic model can predict the variation in bioactive components and antioxidant activity with higher R 2 and lower root mean square error (RMSE) as compared to first order model due to logarithmic reduction in these properties in the beginning of the process itself. However zero and first order kinetic models were found suitable to predict the changes occurring in colour and firmness respectively during blanching. D , z value, activation energy (E a ), activation enthalpy and entropy were calculated for all measured parameters for selected vegetables in the temperature range of 70-90 °C. These finding would be useful in designing thermal processes and related calculations for these vegetables.

The availability of fruit like litchi has been limited by variability in yield, alternate bearing, seasonal differences and most commonly post harvest problems. The litchi fruit has a very short shelf-life during which red color turns brown which greatly affects the appeal to consumer although not the unique flavor. This review article focuses on the post harvest problems especially browning of litchi. The pericarp of litchi is also sensitive to desiccation and turns brown and brittle once moisture is reduced to half. A large number of approaches have been tried to solve this problem starting from hydro-cooling to gamma irradiation but single approach could not suffice for all. In modern era, the logical base of controlling browning is either to control the responsible enzyme or remove the undesirable product of enzyme catalyzed reaction. Thus enzyme technology with good postharvest practice can definitely solve this problem.

Suitability of seven cultivars of apricot viz. New Castle, Kaisha, Royal, Suffaida, Nari, Kullu (Local) and Chulli (wild apricot) was evaluated for dehydration. Osmotic dehydration of fruits consisting of dipping prepared fruits in 70° Brix sucrose syrup containing 2,000 ppm potassium metabisulphite (KMS) for 24 h followed by cabinet air drying (55 °C) to desired moisture (20 ± 0.5 %) gave better dried product with good colour and appeal. Dried whole or halved fruits after removal of stones were preferred over whole fruits with stones with respect to appearance, texture and overall acceptability. Among different cultivars of apricot; cv. Kaisha followed by New Castle were found better with respect to yield as well as quality of dried product. Further, the quality of the osmo-air dried wild apricot fruits was found statistically at par with the quality of the osmo-air dried product obtained from cultivated apricots. Therefore, wild apricot fruits can also be utilized for preparation of acceptable quality of dried product.

Technology for utilization of seabuckthorn berries for preparation of fruit leather/bar was optimized by modifying the foam mat drying technique. The conversion of seabuckthorn juice/pulp into foam was standardized by whipping the pulp after addition of CMC @ 0-3% at 5 °C and drying the resultant foam in dehydrator (55 ± 2 °C) to a moisture content of about 12-14%. The fruit bar prepared from sulphited juice/pulp wrapped in a butter paper followed by packing in polyethylene pouches (20 g) and stored at ambient temperature (14.6-26.1 °C) experienced least changes in quality attributes like ascorbic acid (1045.7 mg/100 g vs 997.5 mg/100 g) and carotenoids (80.4 mg/100 g vs 72.3 mg/100 g) as compared to the leather made from the unsulphited pulp. Storage studies indicate that fruit bars are mildly hygroscopic (0.46-0.65) and can be stored within the RH of 46-65% at room temperature.

Lemon juices clarified with enzymatic treatment with and without cation exchange resin treatment were concentrated to 60(o) Brix in a vacuum evaporator and converted into powders by foam mat drying technique. Powders obtained from cation exchange resin treated juice were better in quality with respect to acidity, glucose, fructose, sugars, and ascorbic acid contents as compared to those prepared form non treated juice. Further, during 9 months storage, the powders suffered slight loss of acidity, and increase in reducing sugars i.e. glucose and fructose and considerable loss (31-55%) in vitamin C contents. Storage conditions did not bring about any significant change in the ash and hesperidin content of the product. But some losses were registered in the total phenols (23.69%) and sensory quality (from 7.72 to 7.26) of the powders. Further, the powders prepared from cation exchange resin treated juice and those pulverized with cane sugar suffered overall lesser changes in most of the quality parameters during 9 months of storage, thus indicating that, the treatment of lemon juice with cation exchange resin is beneficial for better initial product quality and pulverization of prepared powder with cane sugar is beneficial in reducing the hygroscopicity and retention of quality in a better way.

Juice from sand pear and apple was extracted by grating the fruits following extraction using hydraulic press. The juice after extraction was filtered, heat pasteurized and packed in glass bottles followed by processing. Suitability of blending sand pear juice with apple juice was evaluated. Blending of sand pear juice (SPJ) with apple juice (AJ) in the proportion of 50:50 to 60:40 gave better quality with higher sensory score. With the increase in the level of SPJ in the AJ mix there was gradual increase in the level of polyphenols. Brix to acid ratio of the beverage was optimum when SPJ and AJ were blended in the ratio of 50:50 to 60:40. Storage of blended beverage containing 50-60% SPJ was found more shelf stable during 6 months storage.

The kernels of apricot (Prunus armeniaca) stones are utilized for extraction of oil. The press cake left after extraction of oil was evaluated for preparation of protein isolate for its use in food supplementation. The apricot kernels contained 45-50% oil, 23.6-26.2% protein, 4.2% ash, 5.42% crude fibre, 8.2% carbohydrates and 90 mg HCN/100 g kernels, while press cake obtained after oil extraction contained 34.5% crude protein, which can be utilized for preparation of protein isolates. The method standardized for extraction of protein isolate broadly consisted of boiling the press cake with water in 1:20 (w/v) ratio for 1 h, raising pH to 8 and stirring for a few min followed by filtration, coagulation at pH 4 prior to sieving and pressing of coagulant for overnight and drying followed by grinding which resulted in extraction of about 71.3% of the protein contained in the press cake. The protein isolate contained 68.8% protein, 6.4% crude fat, 0.8% ash, 2.2% crude fibre and 12.7% carbohydrates. Thus the apricot kernel press cake can be utilized for preparation of protein isolate to improve the nutritional status of many food formulations.